Commute Time
Date Posted
Title
Job Type
Benefits
Pay
297 Cnc Machine Operator jobs in Santa Ana,CA
Apply Directly
CNC Operator IV - 2nd Shift
Howmet Aerospace
Fullerton, CA 92831
~ 23 min OnsiteFlexible ScheduleHealth InsurancePaid Time OffRetirement Benefit
- Minimum of three years related experience and/or training in machine shop operation running a variety of machine shop equipment including CNC equipment; or equivalent combination of education and experience.
- Use the necessary measuring tools (Micrometers, Calipers, Dial Indicators, Comparator, Gages, etc) as required
- Need to be able to wear safety steel toe shoes and walk around shop floor environment as needed.
- Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.
- Reaching above and below, stooping, kneeling, crouching, and bending.
- Understanding of cutting tools (offset and geometry) and must know \"G\" and \"M\" Codes
- Must be able to lift/move 30 lbs. (may not exceed per EHS policies)
- Willing to cross train and/or assist other departments to meet facility goals
- Good communication skills
- Excellent troubleshooting skills
- Must be able to stand for long periods of time
- Be able to remove dangling jewelry for shop floor assigned tasks, and wear hearing protection as needed.
- Ability to read and interpret blueprints and work instructions
- Visa sponsorship is not available for this position.
- Reads blueprints and has the knowledge to use micrometers, calipers, comparators, thread gauges, depth micrometers and dial indicators as needed
New, Posted 10 hours ago
Apply Directly
2nd Shift CNC Lathe Operator - 3:30pm-12am; $27-29/hr + 12% shift premium
Stanley Black & Decker
Fullerton, CA 92833
$27-$29/hr
$3,000 bonus
~ 23 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Knowledge of basic measuring tools, calipers, micrometers, comparators and math required
- Experience with utilizing a pre-setter off line for tool offsets
- Must be able to lift 30 lbs.
- 3-5 years of operation experience with CNC Lathes (Takisawa).
- Solid understanding of GD&T; with ability to read and interpret drawing requirements
- Experience with quick change tooling
- Experience with macro programming and Mastercam or other major programming software
- Ability to set-up a CNC lathe (including work holding, kitting of tools, touching off of tools/establishing offsets, reading of manufacturing drawings, and first article buy-off) on FANUC controls.
Apply Directly
Machine Shop Supervisor (CNC Required)
Smiths Group
Santa Fe Springs, CA 90670
~ 30 min Onsite
- Demonstrated ability to train, coach, and develop hourly associates.
- Proficiency in Microsoft Office (Word, Excel, PowerPoint, Access, Outlook).
- Tooling knowledge and selection
- Feeds, speeds, and machine controls
- Ability to manage competing priorities in a fast-paced, dynamic environment.
- Troubleshooting machining issues
- Sit for extend periods of time; a minimum of 2 hours.
- Lift up to 35 pounds.
- Have the manual dexterity and coordination to operate office equipment
- Strong verbal and written communication skills.
- High school diploma or equivalent
- Minimum 5 years of experience in a manufacturing environment, ideally in CNC machining, assembly, repair/service, or production operations
- Maneuver to all areas of the office.
- Significant hands-on CNC machining experience - CNC is the largest and most critical part of this role.
- Experience working in a job-shop or high-mix machining environment.
- CNC operation and basic setup
- Minimum 2 years of supervisory or team-lead experience in a shop or manufacturing setting
- Simultaneously manage several objectives and reassign priorities.
- Proficiency with ERP/MRP systems for tracking work orders, labor hours, and machining/production data.
- Bend, reach, kneel, twist, and grip items while working at assigned desk area.
Apply Directly
CNC Machinist A
Hydraflow
Fullerton, CA 92833
$34-$36/hr
~ 23 min Onsite
- Must possess basic computer skills
- Must be a US Person (US Citizen or Permanent Resident)
- Must be capable of programming using Master Cam Mill /Okuma Lathe
- High School education or equivalent
- Minimum 5 years of CNC experience
- Regularly lift 10+ pounds
- Must be capable of performing duties and responsibilities with minimum supervision
- Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception and the ability to adjust focus
- Knowledge of basic measuring tools, calipers, micrometers, comparators and math required
- Must be US Persons based on ITAR definition (US Citizen or Permanent Resident).*** This position is expected to be exposed to information which is subject to US export control regulations, i.e. the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). All Applicants must be U.S. persons within the meaning of U.S. regulations.
- While performing duties of the job, the employee is required to: Regularly stand, walk, and reach with both hands and arms
- Fluent in English (able to read, speak, write and understand)
- Must be familiar with Okuma lathes, HAAS milling machines and Daewoo/Fanuc Control
- Able to read and understand blue prints
- Perform repetitive motions
Apply Directly
CNC Machine Operator 3
Safran
Garden Grove, CA 92840
$22.14-$34.79/hr
~ 16 min Onsite
- Understand how to utilize work orders.
- Performs work under limited supervision with some latitude for independent judgment
- Must be able to self-inspect work and correct discrepancies in a timely manner.
- More than 5 years
- High School Diploma/GED Equivalent
- 5+ years of experience.
- Significant experience in Aerospace Manufacturing.
- Good hand/eye coordination a must.
- Requires sensitivity to safety regulations and requirements.
- Must meet or exceed current training requirements.
- Vast experience in the operation of CNC machines and the experience with G and M code
- Must have thorough experience/knowledge to operate machinery & various pneumatic/hand tools.
- Requires significant experience within discipline and thorough working knowledge of subject matter
- The ability to read and write English at a comprehensive level is necessary for successful job performance.
- Ability to read engineering blue prints.
- Handles complex issues, escalates only the most complex issues to higher level staff
Apply Directly
CNC Operator
Hubbell Incorporated
Carson, CA 90746
$19.25/hr
~ 33 min Onsite
- Proven experience operating CNC machinery
- Attention to detail and a results-driven approach
- Proficiency with precision measurement tools
- Strong mechanical aptitude and math skills
- High School Diploma or equivalent (required)
- Ability to read and interpret technical documents and drawings
Apply Directly
CNC Mill Operator 1
Illinois Tool Works
Corona, CA 92878
~ 34 min Onsite
- Safety Glasses must be worn at all times.
- Trained in the nonconforming material procedure
- Knowledge of different materials
- Blueprint reading
- Basic math skills
- The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 75 pounds.
- Knowledge of routing
- The noise level in the work environment is usually low to moderate.
- The description of the physical demands and the work environment characteristics here represent those that must be met by an employee to successfully perform and those an employee encounters while performing the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- The employee frequently is required to sit.
- Knowledge of inspection skills
- The employee is occasionally required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; and stoop or crouch.
- Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.
- While performing the duties of this job, the employee is regularly required to talk or hear.
- Required cutting tool knowledge
- Must be familiar with the basic machine functions in order to perform the tasks stated above.
- Knowledge of different CNC controls
Apply Directly
CNC Multi-Task Op-Horizontal
Cla-Val
Costa Mesa, CA 92626
~ 19 min Onsite
- Physical Requirements: Ability to reach equipment control settings
- Physical Requirements: Ability to bend, stoop, stretch, reach, lift, move, and carry tooling and materials weighing 25 pounds or less
- Physical Requirements: Ability to perform essential functions of the job, as defined
- Safety shoes required
- Any offer of employment is contingent upon your successful completion of a pre-employment substance abuse and physical screening, verification of documents pertaining to your right to work in the United States using E-VERIFY, and completion of required employment documents
- A minimum of 3 years recent experience and training in editing programs and setting up, operating, and adjusting CNC multi-task horizontal machining center in a production environment
- Acceptable set of machinist's tools may be required
Apply Directly
Welding Operator - 3rd Shift
Ideal Tridon
Garden Grove, CA 92841
~ 16 min Onsite
- Lift or carry materials weighing up to 50 lbs.
- High School Diploma or equivalent is required.
- Excellent organizational skills and attention to detail.
- Ability to perform repetitive tasks.
- Must be able to clear drug screen and background check.
- Must wear required hearing and/or eye protection.
- The employee is regularly required to stand, walk and/or sit and reach with hands and arms.
- May occasionally climb stairs, drive vehicles, and operate equipment.
- (1) year of solid welding experience in a manufacturing environment.
- The ideal candidate must be able to complete all physical requirements of the job with or without a reasonable accommodation as you will frequently and repetitively be required to bend, twist, kneel, crouch, and reach to perform work, use hands to finger, handle, or feel; and talk and hear.
- Excellent verbal communication skills with strong aptitude for operating machinery.
- Must have reliable transportation.
- Excellent time management skills.
- Ability to follow instructions and learn the production process.
New, Posted just now
Apply Directly
Manufacturing Technician - Hiring Now
Nikon Corporation
Long Beach, CA 90808
~ 30 min OnsiteFlexible Schedule
- Knowledge of raw materials, production processes, quality control, and cost optimization techniques in additive manufacturing.
- Occasionally ascend/descend ladders.
- Familiarity with machines and tools used in additive manufacturing operations, including EOS and SLM equipment.
- REQUIRED: Compliant with the International Traffic in Arms Regulations (ITAR defines "U.S. Person" as a U.S. Citizen or U.S. Permanent Resident)
- Acquire proficiency in technical material related to additive manufacturing and machine maintenance.
- REQUIRED: Obtain and maintain a security clearance.
- REQUIRED: Compliant with the International Traffic in Arms Regulations (ITAR) which requires U.S. person status (ITAR defines "U.S. Person" as a U.S. Citizen or U.S. Permanent Resident)
- Move, position, lift, and stack parts weighing up to 50 pounds on a daily basis.
- Utilize digital applications on interfaces like tablets or smartphones proficiently.
- Regularly push carts, RUWAC vacuums, and other machinery throughout the facility.
- Properly wear personal protective gear throughout the day, including gloves, hearing protection, eye protection, protective footwear, and respirators.
- Communicate with teammates and internal stakeholders regularly regarding daily updates, hazard concerns, questions, and issues.
- REQUIRED: Able to work flexible hours, according to the schedule of the machine builds
- Maintain a stationary position for up to three hours as needed.
- Utilize precision measuring instruments such as calipers, micrometers, and dial indicators.
- Proficiency with various pneumatic and hand tools.
What companies are hiring Cnc Machine Operator jobs in Santa Ana,CA?
- Howmet Aerospace
- Stanley Black & Decker
- Smiths Group
- Hydraflow
- Safran
- Hubbell Incorporated
- Illinois Tool Works
- Cla-Val
- Ideal Tridon
- Nikon Corporation
- Howmet Aerospace
- Stanley Black & Decker
- Smiths Group
- Hydraflow
- Safran
- Hubbell Incorporated
- Illinois Tool Works
- Cla-Val
- Ideal Tridon
- Nikon Corporation
What is the hourly salary range for Cnc Machine Operator jobs in Santa Ana,CA?
The hourly salary range is $19.25 - $36.
The hourly salary range is $19.25 - $36.
