386 Machine Operator 2 jobs in Beloit,WI

CNC Machinist
Level 1 Machinist: Ability to add, subtract, divide, and multiply
Level 1 Machinist: Ability to read and interpret simple production blueprints and sketches
Level 1 Machinist: Set-ups: Easy lift light > 30K lb. part with good pick points, no rolling, simple prismatic part with setup sheet
Level 1 Machinist: Line up and Startup: Simple lineup with proven programs and tooling
Level 1 Machinist: Modify the existing program to make part to print
Level 1 Machinist: Fine-tuning feed and speed by using the program
Level 1 Machinist: Work with Engineer for the machining process
Level 1 Machinist: Makes rough cuts, & verifies progress with precision measuring instruments
Level 1 Machinist: Break sharp corners after machining to ensure proper alignment of subsequent machining & safety of personnel when handling
Level 1 Machinist: Low tolerance finishing (Ra<6.3 and tolerance < +/- .03in.)
Level 1 Machinist: Inspection Tools: Use measuring tools tool to check the work being performed, Scale, Tape measure, 0 to 5 " OD Mic, Depth Mic., Dial Calipers
Level 1 Machinist: Tool Setting: Load tools into machine, Index and change tooling when tool become dull, Assist Tool Setter in assembling and determining what tools are needed to be set for the machine
Level 2 Machinist: Ability to solve more advanced problems and apply them to the job, Simple Trig, Speeds, and Feeds, and solve print math
Level 2 Machinist: Blueprint reading: the ability to read Ingersoll machine prints, tolerances, and a basic understanding of GDT
Level 2 Machinist: Set-ups: Parts with weight > 60K lb. Lifting and rolling simple prismatic parts, setup and lineup of rough and finished Ingersoll parts
Level 2 Machinist: Line up and startup of 3 or 4-axis parts. Set stock and check stock conditions. Prof new programs and tooling.
Level 2 Machinist: Feed rate/speed/RPM for quality part, G and M codes
Level 2 Machinist: Create and use advanced machine programming
Level 2 Machinist: Ability to calculate and edit speed and feed, work with programming
Level 2 Machinist: Makes necessary adjustments & complete machining operations
Level 2 Machinist: Higher tolerance finishing (All Ra finishes with Tolerances > +/- .010)
Level 2 Machinist: Inspection Tools: Use ID Mic, OD Mic., Height Gages, Go, NO-Go gages, Dial Bore Gages, Use machine to check sizes and location 3 axis.
Level 2 Machinist: Assemble and gauge all tools per TDM and on the fly tools as needed to complete machine operation. Work with engineering in tool selection and usage.
Export Control Compliance: Ingersoll Machine Tools, Inc. must comply with the export control laws and regulations of the United States. Under U.S. export control laws, restrictions apply to the release or disclosure within the United States of certain U.S.-origin technology or software source code to individuals who are not “U.S. Persons”. U.S. Persons include U.S. citizens, U.S. nationals, persons lawfully admitted for U.S. permanent residence (green card holders), and persons lawfully granted U.S. asylum or refugee status.
Physical Requirements: Prolonged periods they are standing, kneeling, bending, and climbing ladders or scaffolding.
Physical Requirements: Must be able to lift up to 60lbs daily.
Physical Requirements: Must be able to lift 100lbs weekly.

SmartExplore AI is experimental.

New, Posted 5 hours ago

Recommended

Apply Directly

CNC Machinist - 2nd Shift

SPX

Delavan, WI 53115

$28-$34/hr

$2,500 bonus

~ 31 min OnsitePaid Time Off

3+ years of machining experience
2nd shift (3-11pm)
Training will be conducted on 1st shift

SmartExplore AI is experimental.

New, Posted 1 day ago

Apply Directly

Senior Reactor Operator

Constellation Energy

Rockford, IL 61105

$159,000-$182,000/yr

$10,000 bonus

~ 37 min OnsiteHealth InsurancePaid Time OffRetirement Benefit

High school diploma/GED
1 year Reactor Operator license at a comparable facility or 1.5 years at a noncomparable facility. Comparable is PWR to PWR or BWR to BWR and noncomparable is PWR to BWR or BWR to PWR.
1.5 years or more in a position equivalent to Reactor Operator (or Supervisor) at a military reactor (i.e., Power Plant Watch Engineer, Engineering Watch Supervisor, Reactor Operator, Engineering Officer of the Watch, Propulsion Plant Watch Supervisor). Must have 1.5 years after qualification.
Degree from a 4-year program or equivalent in engineering, engineering technology, or physical sciences, or professional engineer license, and more than 1.5 years as a qualified non-licensed operator or Staff member, Supervisor or Manager in work control, operations, engineering, outage management, maintenance, radiation protection, chemistry, or accredited training at a comparable (BWR or PWR) facility. Managerial, staff engineer, or supervisor experience at a noncomparable plant may be credited on a 1.5:1.0 basis (i.e., over 2.25 years required for noncomparable facility), and 3 years required for a nontraditional degree.
Current or previous SRO Instructor certification and 4 years experience at a comparable facility or 6 years experience at a non-comparable facility.
Maintain minimum access requirement or unescorted access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties.

SmartExplore AI is experimental.

New, Posted 5 hours ago

Recommended

Apply Directly

1st Shift CNC Press Brake Operator

Taylor Commercial Foodservice LLC

Rockton, IL 61072

~ 13 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Three months commercial, vocational, or other specialized training beyond high school
Three to four years related work experience
Manual Dexterity: Work requires moderate speed and accuracy
Physical Effort: Work requires mostly moderate but some heavy muscular effort or difficult work positions
Working Conditions: More frequent exposure to disagreeable features
Hazards: Injury may require a doctor's care. Time lost for part of a day may be to receive medical treatment
Salary Description
22.60hr - pay increases at 12, 16, 20, 24 months
Reads blueprints and production orders
Accurately uses a square, rule and protractor
Retrieves own parts and dies
Enters data into the machine's controller to create a program to run a part including entering gage data (x, r and z coordinates, bend allowances, gage types); entering ram data (tonnage control, positioning, speeds); and entering any detailed information necessary for another operator to run the job in the future (die choices, die positions, information vital to running the job successfully)
Completes own setups
Verifies print to latest engineering revision and then verifies part is made to print specifications
Inspects part for any nonconformities including those of a cosmetic nature (i.e. scratches, dents, deformities)
Arranges completed parts in an orderly fashion and moves finished parts to holding area
Keeps appropriate production records
Services press brake as required and performs preventive maintenance on equipment
Maintains cleanliness of work area and follows safe work practice rules

SmartExplore AI is experimental.

Recommended

Apply Directly

Production Operator

Cargill

Beloit, WI 53511

$19-$22/hr

New, Posted just now

Recommended

Diesel Mechanic

GFL Environmental

Janesville, WI 53545

$35/hr

~ 28 min OnsiteHealth InsurancePaid Time OffRetirement Benefit

High school diploma or general education degree (GED)
Minimum of one (1) year experience as a diesel mechanic
Must be computer literate, have the ability to be trained on software systems and the willingness to learn.
Must be able to meet relevant criteria for safety sensitive functions according to Company standards
Possess physical ability to perform all aspects of job.
Ability to stand, sit, walk, use hands and fingers, reach, stoop, kneel, crouch, crawl, talk, hear, climb, balance, taste, and smell.
Continuous concentrated mental and visual attention required.
Visual Requirements: include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
Frequent physical effort including handling tools and equipment required.
Frequently lift/push/pull up to 100 pounds.

SmartExplore AI is experimental.

New, Posted 1 day ago

Apply Directly