682 Systems Engineering jobs in Cincinnati,OH

BS in Mechanical, Environmental or Chemical Engineering strongly preferred; BS in an Engineering discipline required
5+ years of work experience in a related technical field
Strong knowledge of relevant codes and standards, particularly NFPA 820, and all referenced codes therein. Additional familiarity with ten state standards, applicable OH and NY state regulations for treatment, and various NFPA publications desired
Proficiency in Microsoft Excel, Word, PowerPoint, and other MS software
Self-motivated and able to effectively manage multiple priorities in a fast-paced environment
Well-developed technical skills in fluid dynamics, heat transfer, biological treatment and wastewater management
Professional, reliable, self-directing work habits
Good interpersonal and written communication skills
Duties include providing technical support and guidance at existing, anaerobic digestion facilities, RNG upgrading facilities and related manure and organics derived feedstocks; developing documentation for routine operations; developing and implementing operating strategies and capital improvement projects; reviewing project designs for Operations capital projects including conceptualization, PFD and P&ID; creation, plot plans, mechanical design, structural design, control philosophies

SmartExplore AI is experimental.

New, Posted 1 day ago

Recommended

Apply Directly

Controls Technician

Trane Technologies

Cincinnati, OH 45215

OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

A High School Diploma or equivalent required, and typically at least 3-5 years of experience in HVAC/Controls
Technical School or formal training is preferred
Must possess a valid driver's license for a minimum of 12 months, with no major or frequent traffic violations including, but not limited to: DUI, Hit & Run, License Suspension, Reckless / Careless Driving or multiple smaller infractions or preventable collisions in the previous 3 years
Previous experience with DDC controls system preferred
Must be able to safely and legally operate a vehicle using a seat belt
Must be able to wear helmets, safety goggles, fall protection harness and safety boots to safely perform job duties
Must be able to twist the trunk of your body 90 degrees in each direction
Must be able to squat and touch the floor with both hands
Must be able to reach your hands over your head
Must be able to stand on concrete surfaces for extended periods, routinely up to 4 hours
This position is highly physical and requires regular use of hands, fingers, walking, stooping, kneeling and climbing ladders. It requires employees to regularly lift and or move up to 10 lbs., frequently lift and/or move up to 40 lbs. and occasionally lift and/or move more than 40 lbs.
Must be able to safely use a ladder with a 375 lb. total weight limit, while carrying equipment of 50 lbs. or less
Must be able to maneuver confined access areas, as small as 30” vertical x 45” horizontal
Must be able to comfortably and routinely access rooftops with extension and/or fixed ladders at heights of 15' to 20', and occasionally, up to 50 feet +
This role may be exposed to variable weather conditions, moving mechanical parts, heights, risk of electrical shock, noisy operating equipment and other variable environmental conditions based on location

SmartExplore AI is experimental.

Recommended

Apply Directly

Information Technology Professional (IT Support)

U.S. Navy

Bellevue, KY 41073

Recommended

Apply Directly

Network Technician - 29 Weeks Paid Training, No Experience Required

U.S. Army

Cincinnati, OH 45238

OnsiteUrgently HiringEducation AssistanceHealth InsurancePaid Time Off

Attend a 29-week paid training program to gain skills and certifications in communication network operations, electronic troubleshooting, fiberoptic cable installation, network engineering, and hardware maintenance.
Advanced certifications require additional full funded training programs.

SmartExplore AI is experimental.

Recommended

iHire

Hardware Engineer

L3Harris Technologies

Cincinnati, OH 45245

New, Posted 8 hours ago

Easy Apply

Innovation Engineer

ProAmpac

Cincinnati, OH 45202

Onsite

2 year(s): Experience with FDA requirements and ISO standards.
Master's Degree required
Solid working knowledge of development processes and related manufacturing.
Experience using Microsoft Office Suite (Word, Excel, Power Point), Visio, Teams, and Outlook
Maintains strict confidentiality and protects privacy of confidential/sensitive information.

SmartExplore AI is experimental.

New, Posted 1 day ago

Recommended

Specialist, Manufacturing Engineer

L3Harris Technologies Careers

Cincinnati, OH 45238

Bilingual Preferred

New, Posted 1 day ago

Recommended

Easy Apply

CONTROLS & INTEGRATION ENGINEER

HI-TEK MANUFACTURING

Mason, OH 45040

~ 27 min Onsite

At least one year of CNC machining experience is required.
Programming knowledge in G-codes (Geometric), Ladder Logic (also known as Ladder Diagram or LD), FANUC, and C# (C-Sharp) is strongly desired.
Experience with FANUC CNC systems is highly desirable.
Ability to read machine electrical schematics of machines and electronics.
3+ years of experience building electrical devices and controls for machines used in manufacturing strongly desired.
2D CAD experience for electrical schematics; AutoCAD and 3D CAD experience desired.
Knowledge of Ethernet wiring, basic network configuration, and networking concepts.
Experience in troubleshooting electrical, mechanical, and/or computer systems.
Experience working with hands/hand tools to build and repair mechanical and electrical devices for machine troubleshooting and repair.
Demonstrated ability to influence others positively to achieve positive work results.
Ability to communicate effectively at all levels with external and internal customers.
Ability to effectively work with skilled trades on various aspects of building CNC machinery.
Strong problem-solving skills with creativity and tenacity.
Must meet the ITAR definition of §120.15 U.S. person.
Climb stairs multiple times per day.
Sit, stand, or walk distances for the entire duration of the shift.
Lift, push, or pull 25 lbs. on an occasional basis.
Routinely perform reaching, twisting, bending, and grasping to move and set tools, equipment, and materials.
Perform under AS9100 standards.