307 Meter Reader jobs in Clinton,MS

Recommended

Apply Directly

Sales Agent - No Experience Needed

Aflac

Clinton, MS

Onsite

Must be 18+ and authorized to work in the U.S.
Must be able to work in-person at a designated Aflac office

SmartExplore AI is experimental.

Recommended

Apply Directly

Food Processing Maintenance Technician

BONDUELLE AMERICAS

Jackson, MS 39212

~ 20 min OnsiteBilingual Preferred

Must be able to rebuild gearboxes, power drives, and centrifugal pumps and replace mechanical shaft seals.
Must be able to install production equipment on elevated platforms.
Must be able to weld Stainless Steel. Weld quality to be acceptable for food grade applications.
Must be knowledgeable in liquid pumping principles and able to read pump flow curves.
Must be able to repair/rebuilt pneumatic hoists.
Must be able to time automated equipment drives using vendors manuals and specifications.
Must be knowledgeable in the operating principles of hydraulic systems and able to troubleshoot and repair their mechanical components.
Must be knowledgeable in the operating principles of pneumatic waste system and able to troubleshoot and repair mechanical components.
Must be knowledgeable in mechanical drive fundamentals, i.e. chain drive sprocket and gearbox ratios etc.
Must be able to read piping diagrams and identify the function of various components for air and water distribution systems.
Must be able to replace Slicer/cutter/dicer blade assemblies and perform the necessary adjustments.
Must be able to replace automated equipment mechanical components.
Must be proficient in the use of standard hand tools such as wrenches, hammers, bearing pullers etc.
Must be proficient in the use of simple power tools such as drills, grinders, cut-off saws, impact wrenches, etc.
Must be knowledgeable in cleaning and degreasing techniques.
Must be knowledgeable in basic plumbing repairs & installation
Must be knowledgeable in programming Variable Frequency Drives (VFD's).
Must be able to read electrical diagrams and identify individual components.
Must be able to run electrical conduit and be knowledgeable of code requirements.
Must be able to troubleshoot power distribution systems.
Must have working knowledge of electrical testing equipment such as multimeter, megger, etc.
Must be able to program simple production equipment such as metal detectors, spin dryers, etc.
Must be able to troubleshoot systems up to 480 volts with complicated electrical controls and wire 3 phase motors.
Must be knowledgeable in equipment safety requirements as they apply to equipment moving and installation.
Must be knowledgeable in Welding safety practices and Hot-work Permit requirements.
Must be knowledgeable in forklift and scissors lift safety.
Must have working knowledge in 480-volt electrical safety practices.
Must be able to safely operate shop equipment such as grinders, cut-off saws, power tools, ladders etc.
Must have working knowledge of basic protective equipment requirements as they apply to maintenance personnel.
Must be knowledgeable in the proper use of portable fire extinguishers.
Must be knowledgeable of safe lifting techniques.
Must have working knowledge of OSHA, FDA and GMP requirements as they pertain to maintenance activities at a food processing facility.
Must have working knowledge of basic Protective Equipment Requirements as they apply to maintenance personnel.
Must be knowledgeable in equipment Lock-Out/Tag-Out requirements. Must not by-pass Safety Devices under any circumstance!
Must be knowledgeable of safe lifting techniques, and expected to ask for help if item to move is too heavy.
Must use Slip-resistant footwear due to nature of environment: Wet floors, cold and probably some icing/debris.
Must use/wear/follow PPE, and GMP compliance as needed, including but not limited to: Hair/Bear net, Boots, Clean Smock, Waterproof Rubber Gloves, Plastic sleeves, Cut resistant gloves, eye & hearing protection, face shield, PPE to handle Chemicals when applicable, etc.
Must be aware of potential hazards as: Paper/knife cuts, Slip/falls due to wet floors, Pinch Points/Contusions, Chemical exposure (chlorine), Back/Arms/Legs sprains.
Able to read/write in English and communicate in Spanish.
Able to work flexible hours and overtime as required by workload.
Able to function in a team environment where continuous improvement is expected through communication and cooperation.
Must be willing and able to contribute to and implement department programs, procedures and systems as needed.
Must be able to qualify for forklift, and scissors lift drivers license.

SmartExplore AI is experimental.

New, Posted 1 day ago

Recommended

Utility Worker

Elior North America

Jackson, MS 39203

Recommended

Culinary Agents

Produce Department Supervisor - Full Time

Whole Foods

Jackson, MS 39211

$15.50-$29.20/hr

Flexible Schedule

Recommended

Apply Directly

Flexible schedule - Earn at least $1275 by driving 99 trips with Uber

Uber

Clinton, MS 39056

Flexible Schedule

21 years old or older
A 4-door vehicle
A valid U.S. driver's license and vehicle insurance
At least one year of driving experience in the U.S. (3 years if you're under 23 years old)

SmartExplore AI is experimental.

Recommended

ResumeLibrary

Mechanic Level B

MV Transportation

Jackson, MS 39213

Apply Directly

Dedicated Dry Van Driver Job in Flowood, MS($87K-100K+/YR)

JNJ Express

Flowood, MS 39232

$87,000-$100,000/yr

$1,000 bonus

~ 32 min OnsiteHealth InsuranceRetirement Benefit

Valid Class A CDL
At least 2 out of the past 3 years of OTR experience with a Class A.
No more than 2 moving violations or chargeable accidents in the past 3 years.
No positives/refusals for D&A; or SAP programs within the past 3 years.
Able to drive nights and weekends.
Hair Follicle and urine pre-employment testing.
Must take DOT physical at our lab.
No Local Routes!

SmartExplore AI is experimental.

Apply Directly

Regional Dry Van Driver Job in Jackson, MS(Up to $90K/YR)

Transco Lines

Jackson, MS 39212

~ 20 min OnsiteHealth InsurancePaid Time OffRetirement Benefit

Must have valid Class A CDL
Must be 23 years of age or older (21 years if prior military)
Minimum of 6 months of verifiable OTR tractor-trailer experience in the last 12 months or 12+ Months Experience in Last 2 Years
Must meet FMCSA/DOT driver regulations
Hazmat positions available

SmartExplore AI is experimental.

Apply Directly

Regional Class A Dry Van Driver Job in Pearl, MS ($1,150 – $1,350/Wk)

SPECIALIZED TRANSPORTATION SERVICES

Pearl, MS 39208

$1,350/wk

~ 21 min OnsiteHealth InsurancePaid Time OffRetirement Benefit

Must possess a valid Class A commercial driver's license (CDL A)
Must be at least 21 years of age to meet FMCSA interstate commerce requirements
At least 12 months of verifiable over-the-road (OTR) experience in the previous 36 months or at least 6 months in the last 12-month period
Currently eligible to operate a commercial motor vehicle under DOT/FMCSA regulations and company policy
To remain eligible for company insurance coverage, operators must demonstrate a satisfactory motor vehicle record (MVR), defined as having three (3) or fewer moving violations in the most recent three-year window
Must pass a pre-employment drug screen (per 49 CFR Part 40) and have a clear status in the FMCSA Clearinghouse
Employment is contingent upon successful completion of background checks, motor vehicle record review, and compliance with DOT regulations, where applicable

SmartExplore AI is experimental.

Recommended

Easy Apply