Jobs2Careers logoHome

Boiler Field Engineer

Houston,TX

726 Boiler Field Engineer jobs in Houston,TX

Recommended
Apply Directly
Field Engineer - Electrical / Mechanical Integration

Amentum

Houston, TX 77002

OnsiteHealth InsurancePaid Time OffRetirement Benefit

  • Bachelor's degree in a STEM discipline preferred, with emphasis in Electrical Engineering, Electrical Engineering Technology, Systems Engineering, Mechanical Engineering, Physics, Applied Science, or a related technical field. Equivalent hands-on technical experience may be considered in lieu of degree.
  • Minimum 2 years of hands-on field engineering, electrical troubleshooting, instrumentation, test, maintenance, installation, or hardware-integration experience in a relevant technical environment.
  • Demonstrated experience troubleshooting electrical systems, low-voltage circuits, wiring harnesses, sensors, connectors, signal paths, grounding issues, continuity faults, intermittent failures, or instrumentation anomalies.
  • Demonstrated ability to support hands-on mechanical integration tasks such as equipment installation, sensor mounting, bracket installation, enclosure installation, cable routing, hardware fit checks, and field modification support.
  • Ability to read and interpret wiring diagrams, electrical schematics, harness drawings, mechanical drawings, interface drawings, technical specifications, and field work instructions.
  • Proficiency with standard electrical test and measurement equipment, including multimeters, oscilloscopes, continuity testers, signal analyzers, data acquisition tools, or similar equipment.
  • Working knowledge of low-voltage electrical systems, sensor interfaces, signal wiring, connectors, cable harnesses, termination practices, and basic fault-isolation techniques.
  • Working familiarity with mechanical hardware installation practices, including fasteners, brackets, mounts, access constraints, cable management, strain relief, alignment, fit checks, and field redline documentation.
  • Ability to document troubleshooting steps, field observations, discrepancies, test results, corrective actions, as-built conditions, and engineering recommendations clearly and accurately.
  • Ability to work in field environments, including outdoor, industrial, laboratory, or test-site settings as required.
  • Strong written and verbal communication skills, with the ability to coordinate effectively with engineers, technicians, project managers, vendors, and operations personnel.
  • Ability to obtain and maintain a U.S government security clearance. Note: US Citizenship is required to obtain a U.S government security clearance.
  • Travel: Travel is approximately 50% of working time and is typically planned in advance.
SmartExplore AI is experimental.
View now
Recommended
Apply Directly
Steel Operations General Superintendent - Pre-Engineered Metal Buildings

Northstar Steel

Houston, TX

$90,000-$115,000/yr
OnsitePaid Time OffRetirement Benefit

  • OSHA 30
  • Minimum of 7 years of hands-on experience in structural steel or pre-engineered metal building erection.
  • Significant experience leading steel erection crews, superintendents, and field operations across multiple sites.
  • Deep knowledge of PEMB erection procedures, structural framing, panel systems, sequencing, and constructability.
  • Proven capability to analyze erection drawings, structural blue prints, specifications, and project schedules.
  • Demonstrated experience coordinating cranes, heavy rigging operations, and field equipment logistics.
  • Valid OSHA 30 or ability to obtain
  • Valid driver's license with the ability to visit active jobsites regularly.
SmartExplore AI is experimental.
View now
Recommended
Apply Directly
Senior Field Engineer-Electrical/Mechanical Integration

Amentum

Houston, TX 77002

OnsiteHealth InsurancePaid Time OffRetirement Benefit

  • Bachelor's degree in a STEM discipline preferred, with emphasis in Electrical Engineering, Electrical Engineering Technology, Systems Engineering, Mechanical Engineering, Physics, Applied Science, or a related technical field. Equivalent hands-on technical experience may be considered in lieu of degree.
  • Minimum 15 years of hands-on field engineering, electrical troubleshooting, instrumentation, test, maintenance, installation, or hardware-integration experience in a relevant technical environment.
  • Demonstrated experience troubleshooting electrical systems, low-voltage circuits, wiring harnesses, sensors, connectors, signal paths, grounding issues, continuity faults, intermittent failures, or instrumentation anomalies.
  • Demonstrated ability to support hands-on mechanical integration tasks such as equipment installation, sensor mounting, bracket installation, enclosure installation, cable routing, hardware fit checks, and field modification support.
  • Ability to read and interpret wiring diagrams, electrical schematics, harness drawings, mechanical drawings, interface drawings, technical specifications, and field work instructions.
  • Proficiency with standard electrical test and measurement equipment, including multimeters, oscilloscopes, continuity testers, signal analyzers, data acquisition tools, or similar equipment.
  • Working knowledge of low-voltage electrical systems, sensor interfaces, signal wiring, connectors, cable harnesses, termination practices, and basic fault-isolation techniques.
  • Working familiarity with mechanical hardware installation practices, including fasteners, brackets, mounts, access constraints, cable management, strain relief, alignment, fit checks, and field redline documentation.
  • Ability to document troubleshooting steps, field observations, discrepancies, test results, corrective actions, as-built conditions, and engineering recommendations clearly and accurately.
  • Ability to work in field environments, including outdoor, industrial, laboratory, or test-site settings as required.
  • Strong written and verbal communication skills, with the ability to coordinate effectively with engineers, technicians, project managers, vendors, and operations personnel.
  • Ability to obtain and maintain a U.S government security clearance. Note: US Citizenship is required to obtain a U.S government security clearance.
  • Travel: Travel is approximately 50% of working time and is typically planned in advance.
SmartExplore AI is experimental.
View now
Apply Directly
Quality Inspector

NOV

Houston, TX 77041

Onsite

  • Verify dimensional accuracy of components using a wide range of precision measurement tools (calipers, micrometers, dial indicators, bore gauges, height gauges, thread gauges, surface roughness testers, etc.)
  • Verify supplier documentation for accuracy, completeness, and compliance with applicable requirements.
  • Perform First Article Inspections (FAI), in-process inspections, and final product evaluations.
  • Review inspection records received for compliance
  • Prepare inspection reports and maintain files of inspection documents
  • Support Engineering with dimensional analysis and product disposition.
  • Interpret and apply engineering drawings, tolerances, and GD&T; requirements for complex components
  • Document Nonconformance Reports (NCRs) upon identification of nonconforming products and promptly notify relevant stakeholders.
  • Maintain metrology equipment and ensure compliance with calibration requirements.
  • Adhere to company HSE policies and report unsafe conditions or incidents promptly
SmartExplore AI is experimental.
View now
Recommended
Easy Apply
Heavy Equipment Field Technician (Mechanic)

EquipmentShare

Houston, TX 77035

OnsiteHealth InsurancePaid Time OffRetirement Benefit

  • Must own tools applicable to position
  • Advanced mechanical aptitude and working knowledge of tools
  • Extensive knowledge of construction equipment with an advanced understanding of schematics and diagrams
  • Valid driver's license with acceptable driving record.
  • Must be at least 21 years old to operate company vehicle.
  • Must be able to move, stand, stoop and bend freely
  • Must be able to lift up to 50 pounds at times
  • Field Technicians may be required to be clean shaven in order to enter worksites for EquipmentShare customers who have this requirement
  • This is a safety sensitive position and any offer of employment will be contingent on passing a 10 panel drug screen
  • Employment is contingent on passing a background check.
  • Additionally, some roles require passing a drug test, depending on the job responsibilities.
SmartExplore AI is experimental.
View now
Apply Directly
Quality Control Specialist

ABB

Houston, TX 77084

Hybrid

  • Minimum 10 years of experience in electrical construction, quality assurance, commissioning, field engineering, or a related industrial role.
  • Strong knowledge of the National Electrical Code (NEC) and electrical installation best practices.
  • Experience interpreting electrical drawings, one-line diagrams, wiring schematics, layout drawings, and construction documentation.
  • Experience performing field quality inspections and documenting inspection results.
  • Familiarity with industrial electrical equipment, control systems, switchgear, motor control centers (MCCs), and power distribution systems.
  • Experience with medium voltage power projects up to 35kV.
  • Strong understanding of electrical testing procedures including insulation resistance, contact resistance, VLF, hi-pot, partial discharge, etc.
  • Experience reviewing and managing redline drawings and construction documentation.
  • Strong understanding of installation testing, inspection records, turnover documentation, and project closeout requirements.
  • Excellent communication and interpersonal skills with the ability to work effectively with customers, contractors, engineers, and project teams.
  • Strong organizational skills with the ability to manage multiple projects and priorities simultaneously.
  • Ability to travel extensively (approximately 50-75%) throughout the United States and occasionally internationally as project requirements dictate.
  • You are currently authorized to work permanently in the United States.
SmartExplore AI is experimental.
View now
Apply Directly
Manual Machinist

ITT Cannon LLC

Stafford, TX 77477

~ 23 min OnsiteHealth InsurancePaid Time OffRetirement Benefit

  • Strong experience operating large Horizontal Boring Mills (HBM) and Vertical Turret Lathes (VTL).
  • Advanced knowledge of manual machining practices and machine tool operation.
  • Ability to read and interpret engineering drawings, GD&T; symbols, and technical specifications.
  • Thorough understanding of machining tolerances, fits, and precision measurements.
  • Ability to independently determine machining methods and sequences for repair and manufacturing work.
  • Strong troubleshooting and problem-solving skills.
  • Ability to safely handle and machine large, heavy components.
  • Strong organizational and time management skills.
  • Ability to work independently with minimal supervision.
  • Effective communication and teamwork skills.
  • Basic computer skills for documentation and job tracking.
  • Minimum 7-10 years of manual machining experience in a repair, manufacturing, or job shop environment.
  • Minimum 5 years of experience operating Horizontal Boring Mills (HBM).
  • Minimum 5 years of experience operating Vertical Turret Lathes (VTL).
  • Overhead crane and rigging experience preferred.
  • High School Diploma or GED preferred (or equivalent experience)
  • Journeyman Machinist certification considered a plus.
SmartExplore AI is experimental.
View now
Apply Directly
Quality Inspector — Machined Components & GD&T

NOV

Houston, TX 77041

OnsitePaid Time OffRetirement Benefit

  • High school diploma, GED, or equivalent combination of education and experience
  • Minimum of 3- years Assembly/Mechanical/Receiving inspection experience
  • Must be able to read and write in English
  • Knowledge in reading and interpreting engineering drawings, material specification and requirements
  • Pass the J2 Color and Acuity eye test
  • Exposed to loud noise while in the warehouse
  • Exposed to moving parts while on the shop floor
  • Exposed to occasional hot and /or cold weather depending on outside climate conditions and warehouse temperature since the shop floor is neither air conditional nor heated
  • Limited (5% or less) travel
  • Work in warehouse/shop floor environment setting 75% or the day, 25% of the day is spent at a computer in an office
SmartExplore AI is experimental.
View now
Apply Directly
Manufacturing Engineering Manager

Amot Controls Corporation

Houston, TX 77064

Onsite

  • Bachelor's degree in Electrical, Mechanical, or Manufacturing Engineering
  • 7-10 years of progressive manufacturing/process engineering experience, including direct ownership of NPI and new process/test set-up
  • Electronics or electro-mechanical assembly and test experience required - actuators, motors, PCB/harness assemblies, or comparable electro-mechanical products
  • Experience in a high-mix, low-volume industrial manufacturing environment required
  • Demonstrated experience designing manufacturing layouts and test fixtures/equipment for new products
  • Strong working knowledge of Lean manufacturing and continuous improvement methodologies (5S, Kaizen, standard work, root-cause problem solving)
  • Working knowledge of electronic components, wiring/harnessing, and electrical test methods; able to read schematics and troubleshoot electro-mechanical assemblies
  • Experience managing supplier relationships and resolving supplier quality/process issues tied to new designs
  • Detailed knowledge in job traveler and routing setup principles
  • Ability to read, analyze, and interpret engineering drawings, technical specifications, and governmental regulations
  • Ability to respond to common inquiries from customers, suppliers, or members of the business community
  • Ability to effectively present information to management and cross-functional stakeholders
  • Ability to apply mathematical and statistical concepts to process capability analysis, including Cpk/Ppk calculations, statistical process control, and yield/cycle-time analysis
  • Proficient in using Microsoft Office applications, ERP/MRP platforms, and CAD or statistical software
  • Proven problem-solving ability
  • Knowledge of electro-mechanical actuator design and manufacturing
  • Knowledge of machining and assembly processes
  • Knowledge of the valve/flow control industry
  • Physical ability to stand, walk, sit, reach with hands and arms, talk or hear, and use hands and fingers to handle and feel; occasional lift up to 35 pounds
  • Travel domestically up to 10%
SmartExplore AI is experimental.
View now
New, Posted 17 hours ago
Apply Directly
Senior Engineer - Rotating Equipment

Calpine Operating Services Company

Pasadena, TX 77506

~ 33 min Onsite

  • Bachelor's Degree in engineering or equivalent
  • Minimum of 5+ years' experience with a concentration on rotating equipment.
  • Developing use and/or application of basic principles, theories and concepts.
  • Previous experience working in team an environment using analytical skill set to provide recommendations around business challenges.
  • Previous experience evaluating performance using model-building techniques.
  • Strong communication skills, verbal, written and presentation skills.
  • Proficiency in MS Office to include MS Excel, MS PowerPoint, etc.
SmartExplore AI is experimental.
View now
Profile builder
Answer questions related to your search and surface your matches.
Browse Jobs
  • Jobs in Top Cities
  • Jobs by State
  • Jobs by Title
  • Jobs by Category
Tools
  • Free Resume Builder
  • Jobs2Careers+ Extension
Company
  • Post a Job
  • About
  • Advice
  • Contact
Jobs2Careers Powered by Talroo© 2026 Jobs2Careers
Logos provided by Logo.dev
© 2026 Jobs2Careers
Privacy PolicyTerms of UseYour Privacy ChoicesCalifornia Consumer Privacy Act (CCPA) Opt-Out Icon
Jobs2Careers Powered by Talroo