Jobs2Careers logoHome

Cad Engineering

Houston,TX

895 Cad Engineering jobs in Houston,TX

Recommended
ZipRecruiter
Director of Engineering and Design

AUC Group LLC

Houston, TX 77079

Recommended
Apply Directly
Quality Inspector — Machined Components & GD&T

NOV

Houston, TX 77041

OnsiteUrgently HiringPaid Time OffRetirement Benefit

  • High school diploma, GED, or equivalent combination of education and experience
  • Minimum of 3- years Assembly/Mechanical/Receiving inspection experience
  • Must be able to read and write in English
  • Knowledge in reading and interpreting engineering drawings, material specification and requirements
  • Pass the J2 Color and Acuity eye test
  • Exposed to loud noise while in the warehouse
  • Exposed to moving parts while on the shop floor
  • Exposed to occasional hot and /or cold weather depending on outside climate conditions and warehouse temperature since the shop floor is neither air conditional nor heated
  • Limited (5% or less) travel
  • Work in warehouse/shop floor environment setting 75% or the day, 25% of the day is spent at a computer in an office
SmartExplore AI is experimental.
View now
New, Posted 20 hours ago
Apply Directly
Assembler 1

Natural Gas Solutions North America LLC

Houston, TX 77041

$15-$17/hr
OnsiteHealth InsurancePaid Time OffRetirement Benefit

  • High School Diploma / GED from an accredited school or institution
  • Minimum of 1 years of manufacturing experience
  • High School Diploma or Equivalent preferred
SmartExplore AI is experimental.
View now
Apply Directly
Manufacturing Engineering Manager

Amot Controls Corporation

Houston, TX 77064

Onsite

  • Bachelor's degree in Electrical, Mechanical, or Manufacturing Engineering
  • 7-10 years of progressive manufacturing/process engineering experience, including direct ownership of NPI and new process/test set-up
  • Electronics or electro-mechanical assembly and test experience required - actuators, motors, PCB/harness assemblies, or comparable electro-mechanical products
  • Experience in a high-mix, low-volume industrial manufacturing environment required
  • Demonstrated experience designing manufacturing layouts and test fixtures/equipment for new products
  • Strong working knowledge of Lean manufacturing and continuous improvement methodologies (5S, Kaizen, standard work, root-cause problem solving)
  • Working knowledge of electronic components, wiring/harnessing, and electrical test methods; able to read schematics and troubleshoot electro-mechanical assemblies
  • Experience managing supplier relationships and resolving supplier quality/process issues tied to new designs
  • Detailed knowledge in job traveler and routing setup principles
  • Ability to read, analyze, and interpret engineering drawings, technical specifications, and governmental regulations
  • Ability to respond to common inquiries from customers, suppliers, or members of the business community
  • Ability to effectively present information to management and cross-functional stakeholders
  • Ability to apply mathematical and statistical concepts to process capability analysis, including Cpk/Ppk calculations, statistical process control, and yield/cycle-time analysis
  • Proficient in using Microsoft Office applications, ERP/MRP platforms, and CAD or statistical software
  • Proven problem-solving ability
  • Knowledge of electro-mechanical actuator design and manufacturing
  • Knowledge of machining and assembly processes
  • Knowledge of the valve/flow control industry
  • Physical ability to stand, walk, sit, reach with hands and arms, talk or hear, and use hands and fingers to handle and feel; occasional lift up to 35 pounds
  • Travel domestically up to 10%
SmartExplore AI is experimental.
View now
Apply Directly
Director of Engineering and Asset Management

Royal Vopak

Deer Park, TX 77536

~ 34 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

  • Must possess or be able to obtain a TWIC (Transportation Worker Identification Credential) as required by the Maritime Transportation Security Act.
  • Bachelor's degree in Engineering, Mechanical Engineer or similar degree required
  • Minimum of 15 years of relevant projects experience
  • Minimum of 8 years technical management experience
  • MS Projects - P6 knowledge & proficiency is a big plus
  • Good knowledge and experience of cost estimating software utilization
  • Good knowledge and experience of CAD software utilization
  • Expert (+15 years) - Development, definition and implementation of Front-End Loading (FEL I, II & III)
  • Expert (+15 years) - New and existing technology in relation to green/brownfield terminal development
  • Expert (+15 years) - Industry technologies related to storing & handling of Oil, Gas & Chemical and bulk liquids
  • Expert - Relevant industry standards and practices (e.g. API, NFPA, PIANC, etc.).
  • Expert - Support and provide advice during development of the conceptual design, functional requirements and Basis of Design (BoD) in close coordination with Project Team
  • Experience in the oil and gas industry & chemicals
SmartExplore AI is experimental.
View now
Recommended
Apply Directly
Quality Control Specialist

ABB

Houston, TX 77084

Hybrid

  • Minimum 10 years of experience in electrical construction, quality assurance, commissioning, field engineering, or a related industrial role.
  • Strong knowledge of the National Electrical Code (NEC) and electrical installation best practices.
  • Experience interpreting electrical drawings, one-line diagrams, wiring schematics, layout drawings, and construction documentation.
  • Experience performing field quality inspections and documenting inspection results.
  • Familiarity with industrial electrical equipment, control systems, switchgear, motor control centers (MCCs), and power distribution systems.
  • Experience with medium voltage power projects up to 35kV.
  • Strong understanding of electrical testing procedures including insulation resistance, contact resistance, VLF, hi-pot, partial discharge, etc.
  • Experience reviewing and managing redline drawings and construction documentation.
  • Strong understanding of installation testing, inspection records, turnover documentation, and project closeout requirements.
  • Excellent communication and interpersonal skills with the ability to work effectively with customers, contractors, engineers, and project teams.
  • Strong organizational skills with the ability to manage multiple projects and priorities simultaneously.
  • Ability to travel extensively (approximately 50-75%) throughout the United States and occasionally internationally as project requirements dictate.
  • You are currently authorized to work permanently in the United States.
SmartExplore AI is experimental.
View now
Apply Directly
Sr. Assembler (2nd Shift)

DistributionNOW

Tomball, TX 77375

~ 36 min OnsiteHealth InsurancePaid Time OffRetirement Benefit

  • Read, interpret and follow basic blueprints, diagrams, engineering drawings, specifications, bills of materials, and other written instructions or procedures to accurately assemble equipment and products
  • Basic hand tool use required (pipe wrench, end wrench, level, tape measure etc.)
  • Performing basic welding
  • Maintain inventory of product in work stations
  • Perform quality work checks to insure the product meets quality standards
  • Identify product defects and complete appropriate documentation when defects are identified
  • Rework and/or repair assembled equipment and products according to engineering specification changes
  • Perform all work in accordance with quality standards and established safety procedures
  • Maintain a clean and safe work area
SmartExplore AI is experimental.
View now
Apply Directly
Machinist

Celeros Flow Technology

Houston, TX 77041

$30-$34/hr
OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

  • MACHINIST - 2ND SHIFT
  • Location: Houston, Westplain Campus
  • Work Environment: Monday - Friday onsite - 2nd shift
  • Rate of Pay: $30-$34/hour based on years of experience, plus quarterly bonus
  • 2ND SHIFT - Shift Differential $2.50/hour Hours: 1:30pm-10:00pm
  • The Machinist produces machined parts by setting up and operating a computer numerical control (CNC) machine, maintaining quality and safety standards, keeping records and maintaining equipment and supplies. You'll work collaboratively with other multi-skilled technicians under the direction of the Shop Supervisor.
  • Setting up and operating various machines and tools on a 3 or 4 axis CNC.
  • Reading and interpreting work orders to select proper work center and identify required tooling and/or programs necessary to perform the operation.
  • Listen to machining operation in order to detect sounds such as those made by dull cutting tools or excessive vibration and compensate for problems.
  • Obtaining and installing proper tooling, such as jaws, chucks, tombstones, fixtures, and cutting tools.
  • Using various gauges and precision instruments (i.e. intra-mics, profilometers for finish surface requirements, calipers, IDOD micrometers, indicators, and special gaging equipment, etc.) to inspect production pieces to make necessary program and tooling adjustments.
  • Cleaning and removing burrs after the operation is completed.
  • Assisting manufacturing engineering in process improvements.
  • Training other employees on a variety of machine tools and operations.
  • Returning tooling and reporting any difficulties with tooling or material.
  • Train/Mentor lower-level CNC machinists.
  • Maintain continuity among shifts by documenting and communicating actions taken thus far as well as any necessary further step
  • Read, write, speak and comprehend English.
  • Add, subtract, multiply, divide and work with fractional measurements and decimals.
  • Set up, adjust, and operate all machine tools in your area of responsibility in order to produce various parts within specifications from blueprints.
  • Read and understand manufacturing mechanical blueprints, and use good basic math skills in addition, subtraction, division and multiplication.
  • Work accurately with basic keyboard and monitor interfaced with the mainframe computer to enter work order data and correct qualities as required.
  • Hold very close tolerances and surface finish requirements.
  • Exceptional teamwork skills and strong communication abilities.
  • Working knowledge or ability to learn to use a micrometer, depth micrometer, dial indicators, CMM, and other precision measuring instruments.
  • A demonstrated history of good attendance and a safe work record.
  • Maintain conscientious work behaviors including work ethic, safety standards, quality, costs, and On-Time Delivery (OTD)
  • A high school diploma or GED equivalent.
  • 5+ years of manual machining working with CNC lathes, mills and surface grinders.
  • The ability to read and interpret drawings, blueprints and other documents.
  • Proficiency with measuring equipment, such as calipers, gauges and micrometers.
  • Computer proficiency.
  • Experience working with stainless steel or duplex stainless steel preferred.
  • CNC Horizontal mill experience preferred.
  • Lean manufacturing methods preferred.
  • Able to work quickly and efficiently through Process Improvement structure; Good verbal and written communication; Strong attention to detail and accurate record keeping
SmartExplore AI is experimental.
View now
New, Posted 8 hours ago
Recommended
Apply Directly
Project Structural Fitter B -2nd Shift

Solar Turbines Incorporated

Channelview, TX 77530

~ 31 min OnsiteHealth InsurancePaid Time Off

  • Must be able to pass structural fitter qualification test
  • Minimum of 6 months of experience in a production environment
  • Ability to perform simple computer operations
  • Be available to work 1st and 2nd shift
  • Ability to work overtime to support production demands
  • Must be able to climb and work from ladders and scaffolds
  • Ability to work well individually or in a team environment
  • Background Screening
  • Physical and drug/alcohol screening
SmartExplore AI is experimental.
View now
Recommended
Apply Directly
Designer Intern

SEL Engineering Services

Houston, TX 77084

$21-$22.50/hr
OnsiteFlexible ScheduleRetirement Benefit

  • You are a current student pursing a degree in EET, CAD, Drafting, or relevant discipline
  • You have demonstrated competence in CAD drafting (AutoCAD and/or Microstation)
  • The ideal candidate ... will be able to work full-time during the summer and/or part-time during the school year
  • This position is located in Houston, TX
  • SEL is an Equal Opportunity Employer: Vets/Disabled
SmartExplore AI is experimental.
View now
Profile builder
Answer questions related to your search and surface your matches.
Browse Jobs
  • Jobs in Top Cities
  • Jobs by State
  • Jobs by Title
  • Jobs by Category
Tools
  • Free Resume Builder
  • Jobs2Careers+ Extension
Company
  • Post a Job
  • About
  • Advice
  • Contact
Jobs2Careers Powered by Talroo© 2026 Jobs2Careers
Logos provided by Logo.dev
© 2026 Jobs2Careers
Privacy PolicyTerms of UseYour Privacy ChoicesCalifornia Consumer Privacy Act (CCPA) Opt-Out Icon
Jobs2Careers Powered by Talroo