Jobs2Careers logoHome

Plasma Operator Engineering

Houston,TX

744 Plasma Operator Engineering jobs in Houston,TX

Recommended
Apply Directly
Quality Inspector — Machined Components & GD&T

NOV

Houston, TX 77041

OnsiteUrgently HiringPaid Time OffRetirement Benefit

  • High school diploma, GED, or equivalent combination of education and experience
  • Minimum of 3- years Assembly/Mechanical/Receiving inspection experience
  • Must be able to read and write in English
  • Knowledge in reading and interpreting engineering drawings, material specification and requirements
  • Pass the J2 Color and Acuity eye test
  • Exposed to loud noise while in the warehouse
  • Exposed to moving parts while on the shop floor
  • Exposed to occasional hot and /or cold weather depending on outside climate conditions and warehouse temperature since the shop floor is neither air conditional nor heated
  • Limited (5% or less) travel
  • Work in warehouse/shop floor environment setting 75% or the day, 25% of the day is spent at a computer in an office
SmartExplore AI is experimental.
View now
New, Posted 6 hours ago
Apply Directly
Structural Welder

Industrial Trade Services

Waco, TX 76706

$160/day
~ 2 hr 58 min Onsite

  • Previous structural steel welding experience
  • Ability to read and understand blueprints and weld symbols
  • Proficiency with common welding and fabrication tools
  • Ability to perform quality welds in various positions
  • Strong attendance and dependable work history
  • Ability to pass a weld test
SmartExplore AI is experimental.
View now
Recommended
Apply Directly
Quality Inspector

NOV

Houston, TX 77041

OnsiteUrgently Hiring

  • Verify dimensional accuracy of components using a wide range of precision measurement tools (calipers, micrometers, dial indicators, bore gauges, height gauges, thread gauges, surface roughness testers, etc.)
  • Verify supplier documentation for accuracy, completeness, and compliance with applicable requirements.
  • Perform First Article Inspections (FAI), in-process inspections, and final product evaluations.
  • Review inspection records received for compliance
  • Prepare inspection reports and maintain files of inspection documents
  • Support Engineering with dimensional analysis and product disposition.
  • Interpret and apply engineering drawings, tolerances, and GD&T; requirements for complex components
  • Document Nonconformance Reports (NCRs) upon identification of nonconforming products and promptly notify relevant stakeholders.
  • Maintain metrology equipment and ensure compliance with calibration requirements.
  • Adhere to company HSE policies and report unsafe conditions or incidents promptly
SmartExplore AI is experimental.
View now
Recommended
Apply Directly
Production Support (Coating Application)

The Timken Company

Houston, TX 77032

OnsiteUrgently Hiring

  • High School Diploma or GED and must be able to work in USA
  • Basic math, geometry, and mechanical aptitude
  • Basic measurement and print-reading skills
  • Ability to lift to 50 pounds or more
  • Prolonged standing and walking
  • Repetitive movement, lifting, pushing, and pulling
SmartExplore AI is experimental.
View now
New, Posted 19 hours ago
Apply Directly
Yard Truck Driver - Class A - Penske Logistics

Penske Logistics

Houston, TX 77007

$23/hr
OnsiteUrgently HiringHealth InsurancePaid Time OffRetirement Benefit

  • Valid Class A CDL required
  • Applicants must be domiciled in the U.S. and licensed in their state of residence
  • Currently hold, or ability to obtain, a non-excepted interstate DOT medical card required
  • 1 year of documented tractor-trailer experience in the last 3 years required, or 2 years of documented tractor-trailer experience in the past 5 years
  • 3 years DMV/MVR record with two or fewer moving violations or accidents
  • Follow all federal and/or state laws, regulations, and/or agency rules, standards and guidelines
  • Regular, predictable, full attendance is an essential function of the job
  • English language proficiency
  • Work the required schedule, work at the specific location required, complete Penske employment application, submit to a background investigation (to include past employment, education, and criminal history) and drug screening required.
  • This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others.
  • The associate must be able to see and hear. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus.
  • The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg.
  • The associate must be able to legally operate a motor vehicle and safely and frequently enter/exit the vehicle as well as the rear cargo area.
SmartExplore AI is experimental.
View now
Recommended
Apply Directly
Production Support (Coating Application)

Lovejoy Curtis LLC

Houston, TX 77032

OnsiteUrgently Hiring

  • High School Diploma or GED and must be able to work in USA
  • Basic math, geometry, and mechanical aptitude.
  • Basic measurement and print-reading skills.
  • Precision and strong attention to detail.
  • Excellent manual dexterity and ability to control application tools precisely.
  • Strong verbal and written communication skills.
  • Aptitude for decision-making and problem solving.
  • Excellent team skills; collaborative, open-minded, adaptable.
  • Motivation to self-advance and grow within the company.
  • Ability to lift to 50 pounds or more.
  • Prolonged standing and walking.
  • Repetitive movement, lifting, pushing, and pulling.
SmartExplore AI is experimental.
View now
Apply Directly
Machinist II

Amentum

Houston, TX 77002

OnsiteHealth InsurancePaid Time OffRetirement Benefit

  • Requires a High School Diploma or equivalent and a minimum of 4 years of machinist experience.
  • Familiarity in at least one CNC programming language.
  • Familiar with standard concepts, practices, and procedures.
  • Ability to follow written and verbal instructions.
SmartExplore AI is experimental.
View now
Recommended
Apply Directly
Quality Control Specialist

ABB

Houston, TX 77084

Hybrid

  • Minimum 10 years of experience in electrical construction, quality assurance, commissioning, field engineering, or a related industrial role.
  • Strong knowledge of the National Electrical Code (NEC) and electrical installation best practices.
  • Experience interpreting electrical drawings, one-line diagrams, wiring schematics, layout drawings, and construction documentation.
  • Experience performing field quality inspections and documenting inspection results.
  • Familiarity with industrial electrical equipment, control systems, switchgear, motor control centers (MCCs), and power distribution systems.
  • Experience with medium voltage power projects up to 35kV.
  • Strong understanding of electrical testing procedures including insulation resistance, contact resistance, VLF, hi-pot, partial discharge, etc.
  • Experience reviewing and managing redline drawings and construction documentation.
  • Strong understanding of installation testing, inspection records, turnover documentation, and project closeout requirements.
  • Excellent communication and interpersonal skills with the ability to work effectively with customers, contractors, engineers, and project teams.
  • Strong organizational skills with the ability to manage multiple projects and priorities simultaneously.
  • Ability to travel extensively (approximately 50-75%) throughout the United States and occasionally internationally as project requirements dictate.
  • You are currently authorized to work permanently in the United States.
SmartExplore AI is experimental.
View now
Apply Directly
Manual Machinist

ITT Cannon LLC

Stafford, TX 77477

~ 23 min OnsiteHealth InsurancePaid Time OffRetirement Benefit

  • Strong experience operating large Horizontal Boring Mills (HBM) and Vertical Turret Lathes (VTL).
  • Advanced knowledge of manual machining practices and machine tool operation.
  • Ability to read and interpret engineering drawings, GD&T; symbols, and technical specifications.
  • Thorough understanding of machining tolerances, fits, and precision measurements.
  • Ability to independently determine machining methods and sequences for repair and manufacturing work.
  • Strong troubleshooting and problem-solving skills.
  • Ability to safely handle and machine large, heavy components.
  • Strong organizational and time management skills.
  • Ability to work independently with minimal supervision.
  • Effective communication and teamwork skills.
  • Basic computer skills for documentation and job tracking.
  • Minimum 7-10 years of manual machining experience in a repair, manufacturing, or job shop environment.
  • Minimum 5 years of experience operating Horizontal Boring Mills (HBM).
  • Minimum 5 years of experience operating Vertical Turret Lathes (VTL).
  • Overhead crane and rigging experience preferred.
  • High School Diploma or GED preferred (or equivalent experience)
  • Journeyman Machinist certification considered a plus.
SmartExplore AI is experimental.
View now
Apply Directly
Machinist

Celeros Flow Technology

Houston, TX 77041

$30-$34/hr
OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

  • MACHINIST - 2ND SHIFT
  • Location: Houston, Westplain Campus
  • Work Environment: Monday - Friday onsite - 2nd shift
  • Rate of Pay: $30-$34/hour based on years of experience, plus quarterly bonus
  • 2ND SHIFT - Shift Differential $2.50/hour Hours: 1:30pm-10:00pm
  • The Machinist produces machined parts by setting up and operating a computer numerical control (CNC) machine, maintaining quality and safety standards, keeping records and maintaining equipment and supplies. You'll work collaboratively with other multi-skilled technicians under the direction of the Shop Supervisor.
  • Setting up and operating various machines and tools on a 3 or 4 axis CNC.
  • Reading and interpreting work orders to select proper work center and identify required tooling and/or programs necessary to perform the operation.
  • Listen to machining operation in order to detect sounds such as those made by dull cutting tools or excessive vibration and compensate for problems.
  • Obtaining and installing proper tooling, such as jaws, chucks, tombstones, fixtures, and cutting tools.
  • Using various gauges and precision instruments (i.e. intra-mics, profilometers for finish surface requirements, calipers, IDOD micrometers, indicators, and special gaging equipment, etc.) to inspect production pieces to make necessary program and tooling adjustments.
  • Cleaning and removing burrs after the operation is completed.
  • Assisting manufacturing engineering in process improvements.
  • Training other employees on a variety of machine tools and operations.
  • Returning tooling and reporting any difficulties with tooling or material.
  • Train/Mentor lower-level CNC machinists.
  • Maintain continuity among shifts by documenting and communicating actions taken thus far as well as any necessary further step
  • Read, write, speak and comprehend English.
  • Add, subtract, multiply, divide and work with fractional measurements and decimals.
  • Set up, adjust, and operate all machine tools in your area of responsibility in order to produce various parts within specifications from blueprints.
  • Read and understand manufacturing mechanical blueprints, and use good basic math skills in addition, subtraction, division and multiplication.
  • Work accurately with basic keyboard and monitor interfaced with the mainframe computer to enter work order data and correct qualities as required.
  • Hold very close tolerances and surface finish requirements.
  • Exceptional teamwork skills and strong communication abilities.
  • Working knowledge or ability to learn to use a micrometer, depth micrometer, dial indicators, CMM, and other precision measuring instruments.
  • A demonstrated history of good attendance and a safe work record.
  • Maintain conscientious work behaviors including work ethic, safety standards, quality, costs, and On-Time Delivery (OTD)
  • A high school diploma or GED equivalent.
  • 5+ years of manual machining working with CNC lathes, mills and surface grinders.
  • The ability to read and interpret drawings, blueprints and other documents.
  • Proficiency with measuring equipment, such as calipers, gauges and micrometers.
  • Computer proficiency.
  • Experience working with stainless steel or duplex stainless steel preferred.
  • CNC Horizontal mill experience preferred.
  • Lean manufacturing methods preferred.
  • Able to work quickly and efficiently through Process Improvement structure; Good verbal and written communication; Strong attention to detail and accurate record keeping
SmartExplore AI is experimental.
View now
Profile builder
Answer questions related to your search and surface your matches.
Browse Jobs
  • Jobs in Top Cities
  • Jobs by State
  • Jobs by Title
  • Jobs by Category
Tools
  • Free Resume Builder
  • Jobs2Careers+ Extension
Company
  • Post a Job
  • About
  • Advice
  • Contact
Jobs2Careers Powered by Talroo© 2026 Jobs2Careers
Logos provided by Logo.dev
© 2026 Jobs2Careers
Privacy PolicyTerms of UseYour Privacy ChoicesCalifornia Consumer Privacy Act (CCPA) Opt-Out Icon
Jobs2Careers Powered by Talroo