482 Overhead Crane Operator Engineering jobs in Mobile,AL

Recommended

Apply Directly

Crane Operator

Austal USA

Mobile, AL 36695

OnsiteUrgently Hiring

3 years minimum work experience as an overhead crane operator in a shipyard environment or similar industry
Experience as an operator of vertical lift and telescopic boom F/L's
Must meet all the physical requirements specified by ASME B30.2
Ability to follow specific instructions and work with limited supervision
Must possess a thorough knowledge of equipment used in crane/rigging operations. To include, but not limited to, slings, shackles, clamps, chain hoists, load cells, etc.
Demonstrated ability to interpret and utilize load charts
Must have a thorough knowledge of USA Standard hand signals
Must be able to utilize required personal protective equipment [PPE] as per OSHA standards
Must be able to respond to verbal and audible sounds/commands
Must be able to read and comprehend simple instructions, correspondence and memos
Must be able to effectively present information in one-on-one or small group situations
TOOLS: Will be expected to acquire basic tools on a list to be provided by the Crane/Rigging Manager
Must be able to tour all vessels and work sites.
Must have the ability to bend, squat, stoop, crawl, and kneel.
Perform prolonged standing.
Ability to turn head from side to side and about the vertical axis.
Ability to turn body at the waist from side to side and about the vertical axis.
Lift/push/pull 50lbs to 75lbs on an occasional basis.
Lift/push/pull up to 20lbs on a frequent basis.
Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps).
Ability to work at heights above 12' while working from ladders, scaffolding and/or man lifts.
Able to work at a variety of levels (ex. waist, eye, overhead).
Demonstrate the ability to make use of required tools and equipment in a safely appropriate manner.
Demonstrate good balance while working on uneven surfaces and maneuvering obstacles.
Possess sufficient handgrip and coordination to carry and operate tools and equipment.
Ability to utilize personal protective equipment (hardhat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards.
Ability to withstand cold and hot temperatures.
Ability to enter 18" x 36" openings and work in confined spaces for prolonged intervals of time.
Able to respond to verbal and audible sounds/commands
Able to utilize adequate visual skills.
Ability to achieve full arm extension while reaching overhead, reaching out, reaching to the side, and reaching down.
Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers.
While performing the duties of this job, the employee should expect to encounter exposure to humid conditions, bright flashing lights, moving mechanical parts, high precarious places, outside weather conditions, and extreme heat.
The employee should expect to encounter, on occasion, exposure to fumes and/or airborne particles at or below the PEL, toxic or caustic chemicals, and heat and cold.
The noise level in the work environment is usually very loud, + 90 dB.
Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks.
18 years of age or older at time of application
Able to provide proof of US Person Status
No felony convictions of Theft/Deception or Violent crimes within seven years from disposition date
No felony convictions of Drug crimes within three years from disposition date
Willing to submit to a drug screen
Willing to submit to a background check

SmartExplore AI is experimental.

Apply Directly

Focus Factory Construction Support Engineer

General Dynamics Electric Boat

Mobile, AL 36695

Onsite

Bachelor of Science degree in Civil, Mechanical, Electrical or Aerospace Engineering is required.
1-5 years of post-graduate engineering experience.
Ability to obtain a DOD Secret security clearance is required.
Construction engineering experience

SmartExplore AI is experimental.

Recommended

Apply Directly

A Class Pipe Fitter

Austal USA

Mobile, AL 36695

$33.36/hr

OnsiteUrgently Hiring

A Class Pipe Fitter
1 year minimum work experience as a B-class pipe fitter at Austal or 2 years experience in a similar role at comparative employer.
The individual must possess experience in the trade, knowledge of ship terminology, ability to interpret engineering drawings.
The individual must demonstrate ability to interpret job specifications and perform work on marine vessels.
Must be able to follow directions and work with limited supervision.
Must be willing to develop other team members skill levels.
Must have full set of personal tools.
Prepared to Step up as supervisor when required
Follow Austal guidelines and procedures
Do not leave job early or return late from break times
Ensure work area is left clean, all equipment and tools are stowed away safely and protected against damage
Must be able to tour all vessels and work sites.
Must have the ability to bend, squat, stoop, crawl, and kneel.
Perform prolonged standing.
Lift/push/pull 50lbs on an occasional basis.
Lift/push/pull up to 20lbs on a frequent basis.
Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps).
Ability to work at heights above 12' while working from ladders, scaffolding and/or man lifts.
Able to work at a variety of levels (ex. waist, eye, overhead).
Demonstrate the ability to safely and appropriately use required tools and equipment.
Demonstrate good balance while working on uneven surfaces and maneuvering obstacles.
Possess sufficient handgrip and coordination to carry and operate tools and equipment.
Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards.
Ability to withstand cold and hot temperatures.
Ability to enter 18" x 36" openings and work in confined spaces for prolonged periods of time within OSHA guidelines.
Able to respond to verbal and audible sounds/commands.
Able to utilize adequate visual skills.
Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down.
Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers.
Ability to read and comprehend simple instructions, short correspondence, and memos.
Ability to write simple correspondence.
Ability to add, subtract, multiply, divide, and measure using the metric system.
Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.
Ability to deal with problems that may arise in certain situations.
Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks.
PPE available and MUST be used correctly.
Pass the \"A\" Class pipe fitters tests; written with a minimum score of 70% and practical with a minimum score of 90%.

SmartExplore AI is experimental.

Recommended

Apply Directly

Mechanical Assembler I

Collins Aerospace

Foley, AL 36535

~ 58 min OnsiteUrgently HiringFlexible ScheduleEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Typically requires HS diploma (or equivalent, e.g. G.E.D. in the US) or vocational/technical education in related discipline.
Must be authorized to work in the U.S. without the company's immigration sponsorship now or in the future.
The company will not offer immigration sponsorship for this position.
Lift and carry up to 20 pounds.
Able to work in a standing position up to a minimum of 8 hours per day.

SmartExplore AI is experimental.

Apply Directly

MACHINIST III

Birdon

Bayou La Batre, AL 36509

~ 33 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

MACHINIST III
This position is located On-site in our Bayou La Batre, AL location.
Strong mechanical aptitude with hands-on machining experience.
Ability to work from drawings and alignment procedures.
Experience with portable machining equipment.
Proficiency with alignment tools and measurement techniques.
Ability to work in confined spaces, elevated areas, and outdoor conditions.

SmartExplore AI is experimental.

New, Posted 8 hours ago

Service Technician I

Gexpro Services

Theodore, AL 36582

Apply Directly

Mechanical Assembly I

RTX

Foley, AL 36535

~ 58 min OnsiteFlexible ScheduleEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.
Typically requires HS diploma (or equivalent, e.g. G.E.D. in the US) or vocational/technical education in related discipline.
Lift and carry up to 20 pounds.
Able to work in a standing position up to a minimum of 8 hours per day.

SmartExplore AI is experimental.

Apply Directly

Maintenance Planner/ Scheduler... Job (Axis (Mobile), AL, US)

Arkema Inc.

Axis, AL 36505

~ 25 min Onsite

Minimum 2 years of experience in a similar role within a manufacturing environment or chemical plant
Familiarity with a maintenance environment with a focus on material and purchasing. scheduling changes etc.
Prior experience with MS Office
Bachelor's degree in Mechanical Engineering preferred. High School Diploma required and/or a certification in maintenance in lieu of a degree
Certified Maintenance & Reliability Professional (CMRP) certification preferred
Ability to wear personnel protective equipment such as respirators
Knowledge of production processes and equipment; mechanical background preferred
Knowledge of maintenance processes; work order system, planning/scheduling and storeroom
Strong communication and organization skills
Proficient in MS Office and CMMS
Initiative and self-starter
Strong written and verbal communication skills
Ability to effectively communicate with all levels of plant, technical and management personnel
Basic computer skills (email, MS Office)
Experience with SAP and Primavera preferred
Supports the site HES policy and complies with all regulatory and internal requirements
Participates in HES activities provided by site management and Arkema Inc.
Supports and promotes the reporting of all health, safety, environmental, near-miss, accident or injury incidents
On occasion must lift up to 50 pounds and climb ladders
Must be capable of entering confined spaces
Occasionally expected to use tools such as valve wrenches
Position is based in manufacturing facility with all inherent risks
Expected to be present in the field
Will be expected to flex schedule at times to spend ample time with all shifts

SmartExplore AI is experimental.

Apply Directly

Mechanical Assembly I

Collins Aerospace

Foley, AL 36535

~ 58 min OnsiteFlexible ScheduleEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Typically requires HS diploma (or equivalent, e.g. G.E.D. in the US) or vocational/technical education in related discipline.
U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.
Lift and carry up to 20 pounds.
Able to work in a standing position up to a minimum of 8 hours per day.

SmartExplore AI is experimental.

Apply Directly