351 Machine Operator jobs in Saegertown,PA

Recommended

Apply Directly

Machine Shop Operator

Channellock

Meadville, PA 16335

$18-$21/hr

$500 bonus

~ 13 min OnsiteHealth InsurancePaid Time Off

Set-Up:
Make exact and concise set-up on all machines within the work cell.
Remove and replace tooling as required for a variety of parts.
Perform precision set-ups involving alignment and securing of fixtures, setting speeds and feeds and various other parameters according to the part to be produced and the machine to be used.
On initial set-up use precontrolled set-up procedures.
Precision measuring instruments such as micrometers and dial indicators must be used.
Work with the CNC control panel.
Perform Production Run:
Place part in holding fixture and clamp in place, start machine by push button, foot pedal or lever.
Unclamp and remove part when machine completes operations.
Deburr part, assemble parts, weld rivet, Double Disc, Notch the nose, and repeat the cycle.
Check parts with gauges provided and record finding on charts.
Make all adjustments necessary to ensure parts stay within specified control limits.
Simultaneous set-up and operation of multiple machines is required due to long cycle times.
Keep coolant and oil levels at the proper levels and concentrations.
After hardening is done, check handle alignment and straighten if needed.
Check joint tensions and adjust as needed.
Weigh gage as needed.
Check handle spread and gage as needed.
Check nose gap and gage as needed.
Rope cut pliers following standard procedures.
Re-file as needed.
Needle Nose pliers must have the nose adjusted to meet Quality standards.
Cell operators will be required to learn all of the jobs that are performed within the work cell.
Complete appropriate paperwork and maintain 5S requirements.

SmartExplore AI is experimental.

Apply Directly

Machine Operator 2nd and 3rd shift

Snap-tite Hose

Union City, PA 16438

$17.22/hr

~ 33 min Onsite

Must be able to physically perform medium strength tasks
Medium
Up to 50lbs of force exerted occasionally, and up to 20lbs frequently, up to 10lbs constantly
This position required on the job training
A minimum of a high school diploma or GED must be held by employee to qualify for this position
Employee must be physically able to work in areas so as to not harm themselves or others, and must be able to safely use machinery and tools
Understand and verify quality through the use of gauges, tools, specs, and charts
Employees must be able to use scales properly to weigh yarns
Employee must understand how to fill out all paperwork for all areas
Must possess computer knowledge sufficient to perform the job
Must be a problem solver with good mechanical ability, and work well as a team
Employee must be able to communicate with the lead, quality tech, or supervisor any issues they may find that affects the performance of the area, or product

SmartExplore AI is experimental.

Apply Directly

1st Shift CNC Machine Operator

Grand Valley Manufacturing

Titusville, PA 16354

~ 44 min OnsiteFlexible ScheduleHealth InsurancePaid Time OffRetirement Benefit

Requires a High School Diploma or GED Equivalent
Minimum of 5-10 Years of CNC Machining Experience preferred or equivalent combination of education and experience
Read and interpret blueprints, sketches, drawings, routing instructions, manuals, specifications, or sample parts to determine dimensions and tolerances of piece of work, sequence operations, and setup requirements
Independently perform set-up of the machine, choosing the correct programs, cutting tools, and feeds/speeds
Monitor the machining process, checking parts throughout the run, making necessary adjustments to conform to specifications and maintaining tight tolerances throughout run
Observe machine operation to predict or detect malfunctions or out-of-tolerance machining conditions and adjust machine controls or control media as required
Able to make minor changes to cutting programs to account for problems encountered during operation and save modified programs
Verify that all machined details are produced in a manner that meets router specifications
Able to read, interpret, and edit G-Code
Correctly document all required information for the production process
Correctly use micrometers and calipers to read measurements; able to use a dial indicator to line up a shaft in a machine and determine straightness
Perform safe lifting and maneuvering of parts utilizing hoists, overhead crane, jib crane, and/or forklift
Monitor and maintain proper cleanliness of machine and work area
Works in a manufacturing environment and is exposed to moving mechanical parts
The employee will be required to wear eye, foot, and/or other personal protective equipment while performing duties
May on a frequent basis squat, climb, push/pull objects, lift up to 25 lbs., and use hands/fingers for grasping and reaching
May on an occasional basis bend at the waist; reach above the shoulder; turn or twist body; lift up to 50 lbs.; carry up to 35 lbs.; and use hands/fingers for fine manipulation

SmartExplore AI is experimental.

Recommended

Easy Apply

Machine Operator - Temp to Hire, Weekly Pay

Adecco

Lake City, PA 16423

$20-$25/hr

~ 44 min OnsiteHealth InsurancePaid Time OffRetirement Benefit

1+ year CNC machine operation experience preferred
Ability to read a tape measure and blueprints
Basic understanding of G-code or CNC programming is a plus
Strong mechanical aptitude and problem-solving skills
Attention to detail and commitment to quality

SmartExplore AI is experimental.

Recommended

Apply Directly

Machine Operator

PHB Corporation

Fairview, PA 16415

~ 33 min Onsite

Die Cast Division full-time on 3 rd shift
A full range of body motion is required, including bending, twisting, reaching, pushing, pulling, standing, walking, and wrist action
Heavy lifting is required, but assistance and mechanical devices are to be used with objects and equipment over 50 pounds

SmartExplore AI is experimental.

Recommended

Machinist Journeyman, 2nd Shift

Johnson Controls

Saegertown, PA

$43.31/hr

New, Posted 4 hours ago

Recommended

Easy Apply

CNC Machinist

Acutec Precision Aerospace

Meadville, PA 16335

~ 13 min OnsiteHealth InsurancePaid Time OffRetirement Benefit

CNC Machinist
AS9100D certified
Employee Owned Company
Experience as a CNC Machinist

SmartExplore AI is experimental.

Apply Directly

2nd & 3rd Shift Processor/Assembler/Production - Forks Township, PA

Victaulic

Saegertown, PA

OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

2nd Shift 2:00 pm - 10:25 pm
3rd Shift 10:00 pm - 6:20 am
Shift times are subject to change
Employees must be willing to work in excess of 8 hours in one shift
Overtime: Employees must be willing and available to work weekends on an on-going basis if needed
Overtime will paid for all hours worked in excess of forty hours in any one week
The noise level is such that earplugs must be worn at all times
Personal protective equipment must be worn at all times (ex. hard hat, safety glasses, ear plugs, and steel toe shoes)
Safety equipment is provided by the Company with exception of steel toe shoes, which must be provided by employee upon the first day of employment

SmartExplore AI is experimental.

New, Posted 1 day ago

Recommended

Apply Directly

Plastics Press Operator

Career Concepts Staffing Services

Fairview, PA 16415

$14.60/hr

~ 33 min Onsite

Press Operator
Third Shift: 11pm to 7:30am M-F
Pay Rate is $14.60+ per hour DOE.
Excellent attendance and reliability are required
Good eyesight with strong attention to detail
Ability to perform visual quality inspections accurately
Ability to work in a fast-paced manufacturing environment
Relieve other operators on the production floor as needed to maintain workflow
Communicate product quality concerns, equipment issues, and production-related problems to Quality Assurance and supervisory personnel
Maintain a clean, organized, and safe work area by performing routine housekeeping duties
Assist with the training and orientation of new production employees when assigned
Follow all company safety procedures and quality standards
Manufacturing or production experience is helpful but not required
Weigh and package molded parts at assigned press machines
Inspect molded parts