518 Aircraft Structure Assembler jobs in Semmes,AL

3 years minimum work experience as an overhead crane operator in a shipyard environment or similar industry
Experience as an operator of vertical lift and telescopic boom F/L's
Must meet all the physical requirements specified by ASME B30.2
Ability to follow specific instructions and work with limited supervision
Must possess a thorough knowledge of equipment used in crane/rigging operations. To include, but not limited to, slings, shackles, clamps, chain hoists, load cells, etc.
Demonstrated ability to interpret and utilize load charts
Must have a thorough knowledge of USA Standard hand signals
Must be able to utilize required personal protective equipment [PPE] as per OSHA standards
Must be able to respond to verbal and audible sounds/commands
Must be able to read and comprehend simple instructions, correspondence and memos
Must be able to effectively present information in one-on-one or small group situations
TOOLS: Will be expected to acquire basic tools on a list to be provided by the Crane/Rigging Manager
Must be able to tour all vessels and work sites.
Must have the ability to bend, squat, stoop, crawl, and kneel.
Perform prolonged standing.
Ability to turn head from side to side and about the vertical axis.
Ability to turn body at the waist from side to side and about the vertical axis.
Lift/push/pull 50lbs to 75lbs on an occasional basis.
Lift/push/pull up to 20lbs on a frequent basis.
Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps).
Ability to work at heights above 12' while working from ladders, scaffolding and/or man lifts.
Able to work at a variety of levels (ex. waist, eye, overhead).
Demonstrate the ability to make use of required tools and equipment in a safely appropriate manner.
Demonstrate good balance while working on uneven surfaces and maneuvering obstacles.
Possess sufficient handgrip and coordination to carry and operate tools and equipment.
Ability to utilize personal protective equipment (hardhat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards.
Ability to withstand cold and hot temperatures.
Ability to enter 18" x 36" openings and work in confined spaces for prolonged intervals of time.
Able to respond to verbal and audible sounds/commands
Able to utilize adequate visual skills.
Ability to achieve full arm extension while reaching overhead, reaching out, reaching to the side, and reaching down.
Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers.
While performing the duties of this job, the employee should expect to encounter exposure to humid conditions, bright flashing lights, moving mechanical parts, high precarious places, outside weather conditions, and extreme heat.
The employee should expect to encounter, on occasion, exposure to fumes and/or airborne particles at or below the PEL, toxic or caustic chemicals, and heat and cold.
The noise level in the work environment is usually very loud, + 90 dB.
Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks.
18 years of age or older at time of application
Able to provide proof of US Person Status
No felony convictions of Theft/Deception or Violent crimes within seven years from disposition date
No felony convictions of Drug crimes within three years from disposition date
Willing to submit to a drug screen
Willing to submit to a background check