Commute Time
Date Posted
Title
Job Type
Benefits
Pay
142 Cad Drafter jobs in Rio Linda,CA
Easy Apply
HVAC Install Lead Technician
Bell Bros
Sacramento, CA 95823
~ 27 min OnsiteUrgently HiringHealth InsurancePaid Time OffRetirement Benefit
- Must have and maintain a valid driver's license and clean driving record
- Standing up to 8 hours per day; Walking up to 8 hours daily on uneven, difficult terrain.
- Required to work in outside weather conditions, including heat, cold, and temperature swings, for extended periods of time.
- Minimum of 3+ years in HVAC installation experience in the field
- Proficient in HVAC functional design and installation of ductwork system
- Demonstrated ability to build and transition duct work, install indoor/outdoor units, braze and solder
- Occasionally required to ascend/descend ladders and balance.
- EPA 2 Certification Required
- Occasional lifting and carrying up to 50 pounds.
- Regularly required to use hands to finger, handle, or feel and reach with hands and arms.
- Exceptional Safety knowledge of tools, testing devices, and surroundings
- Ability to lead and coach apprentices on projects
- Knowledge of HVAC parts and their functions
- May work in closed or cramped spaces on occasion
- The principal duties of this position are performed in various environments, including customer homes, the outdoors, and field environments at development and work sites on uneven and rough terrain.
New, Posted 22 hours ago
Apply Directly
Journey Lineworker Line of Progression
PG&E Corporation
Lincoln, CA 95648
$73.78/hr
~ 32 min Onsite
- Completion of a federal or state sanctioned lineworker apprenticeship with approved supporting documentation and/or union or union-affiliated sponsored lineworker apprenticeship
- Ability to travel and transfer to a new headquarter upon request at any time; throughout the entire PG&E service territory
- If hired as Provisional, must complete the provisional training plan within one year from hire date
- Must be at least 18 years of age
- Ability to work and drive in all types of weather and road conditions
- Ability to wear company provided Personal Protective Equipment (PPE)
- Capable to work extended hours, nights, weekends and holidays
- Ability to lift and carry up to 100 pounds
- Must have passed a California DMV medical exam by first day of employment
- High School diploma, GED or equivalent work experience
- Must possessed a valid California Class A driving permit by first day of employment
Apply Directly
Service Calibration Technician
Keysight Technologies
Roseville, CA 95678
$107,440/yr
~ 28 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Demonstrate strong computer skills, including experience in software development, software modification processes, and automated calibration systems.
- Solve non-standard, "one-of-a-kind" problems by developing new or customized solutions.
- Maintain high workmanship standards and consistently deliver on commitments.
- Adhere to the highest standards of business ethics.
- Hold a Bachelor's Degree in Electronics or Engineering, with 5+ years of experience in Military Metrology (PMEL) or relevant work in calibration of test measurement equipment-or a combination of both.
- Perform calibration, adjustment, diagnosis, and troubleshooting of test and measurement equipment down to the assembly level.
- Take independent action and initiative, interfacing effectively with team members, customers, and management.
- Leverage technical expertise to fix, enhance, or develop automated calibration procedures, and document results in a format that integrates seamlessly into Service Center processes.
- Provide leadership and facilitate discussions among Service personnel, cross-functional teams, and trade customers regarding technical issues and problem resolution.
- Possess a solid understanding of Measurement Uncertainty application and calculations, Measurement Guardbanding, and other principles associated with the highest level of traceability directly to SI units. Maintain working knowledge of current quality standards including ANSI/ISO 9001, ANSI/Z540.3, and ISO/IEC 17025.
- Promote ESD and other programs that support high-quality service delivery and minimize re-repair.
- Support formal presentations on technical matters to customers, engineering teams, and management.
Apply Directly
Quality Control Line Lead
CARVANA
Rocklin, CA 95765
~ 33 min OnsiteEducation AssistanceHealth InsuranceRetirement Benefit
- High School Diploma or GED equivalent
- Must be at least 18 years of age
- Valid unrestricted driver's license with a clean driving record in the last 3 years.
- Demonstrated functional expertise in one or more areas pertaining to Carvana's reconditioning process
- Requires use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment.
- Experience using computers
- Ability to effectively delegate tasks to team members.
- Ability to multitask and prioritize effectively.
- Ability to communicate clearly and concisely, both written and oral.
- Demonstrated understanding of our current reconditioning processes and lean principles
- Must be able to lift up to 60 pounds independently; majority of lifting from knee to shoulder heights; other lifting required from various levels
- Requires standing for extended periods of time with frequent stretching, reaching, walking, stooping, pushing, and/or pulling in an environment that may be cold, hot, noisy, and wet and may have fumes or odors due to vehicle maintenance.
- Ability to communicate and interact with others effectively in a professional, courteous manner.
- Hiring is contingent on passing a complete background check.
- Ability to resolve complex issues with guidance from others.
- Ability to maintain high volume and high-quality content in a fast-paced environment.
Apply Directly
Assembler - Hiring Now
Teledyne
Rancho Cordova, CA 95741
~ 34 min OnsiteFlexible ScheduleHealth InsurancePaid Time OffRetirement Benefit
- Ability to read and interpret technical drawings and instructions (required)
- Must be a U.S. Person (includes U.S. citizens, lawful permanent residents, refugees, and asylees) (required)
- Basic soldering skills and willingness to learn advanced techniques (required)
- Manual dexterity and ability to work with small components (required)
- High school diploma and vocational or technical training (required)
Apply Directly
CNC Machinist
Precision Fluid Controls
Lincoln, CA 95648
$25-$55/hr
~ 32 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Asylee under 8 U.S.C. or 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
- At least 3 years of experience in CNC operation/setup
- Ability to read and interpret technical documents and mechanical drawings
- Strong understanding of machining principles and tool selection
- U.S. lawful, permanent resident (aka green card holder), or
- ITAR Compliance.
- Work experience performing precision machining of titanium, aluminum, Inconel, and composite materials
- U.S. citizen or national, or
- Refugee under 8 U.S.C. or 1157, or
New, Posted 5 hours ago
Apply Directly
Welder - Submarine Building
Martin Sprocket & Gear
Sacramento, CA 95811
$21.97-$32.80/hr
~ 27 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Reasonable accommodations may be made to enable qualified candidates with disabilities to perform the essential functions
- Shift Endurance: Ability to consistently stand for the entire duration of the shift in a non-climate-controlled environment
- Attendance & Compliance: Ability to work scheduled hours and adhere to company timekeeping and all other policies
- MIG Welding Experience
- Prior experience in MIG welding within a manufacturing environment or equivalent technical schooling is required
- Report to work daily to perform each essential duty satisfactorily
- Physically able to lift, push, pull, and position heavy components as required
Apply Directly
Service & Sales Representative (SMF) - Part-Time
CLEAR
Sacramento, CA 95837
~ 27 min Onsite
- Open availability and flexibility – ability to work various shifts including weekends and holidays
- Must be 18 years of age or older
- Completion of airport badging and government screening process, including a drug test
- High school diploma or GED equivalent required
- Ability to stand for up to 8 hours per day
New, Posted 13 hours ago
Apply Directly
Auto Glass Installation Technician Trainee
Safelite
West Sacramento, CA 95691
$23.50/hr
~ 24 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Ability to communicate orally (via phone) and written (via computer or other electronic means)
- Safelite SafeTech™ certification Required
- Ability to operate a motor vehicle in accordance with all federal, state and local laws and agreement to be monitored via in-cab vehicle safety camera / video surveillance technology
- This position involves driving duties that will be monitored through the use of cameras, GPS, and other tracking technologies to ensure safety and compliance.
- Must be 18 years of age or older. Required
- Ability to stand for extended periods, work in tight spaces, bend and twist body
- Valid state-issued driver's license any other license(s) (as required by federal, state and local laws) to operate a company vehicle. Required
- Proficiency in using computerized diagnostic tools to complete recalibrations and trouble-shoot issues
- Ability to work with chemicals (including but not limited to flammable chemicals), as applicable per the “Safelite Way of Fitting”
- Ability to maintain a professional appearance, adhering to Company uniform and PPE policies
- Ability to work outside (in a wide variety of weather conditions and extreme temperatures) for extended periods
- Ability to regularly lift and carry up to 35 pounds and occasionally lift and carry up to 50 pounds
- Ability to use a variety of hand tools and power tools safely and effectively
- Ability to read, write and interpret the English language and technical directions
New, Posted 1 day ago
Apply Directly
CNC Machinist IV
Kratos Defense
Mcclellan, CA 95652
$42-$50/hr
~ 15 min Onsite
- Proven experience handling and machining various composite materials.
- Must be able to demonstrate accurate basic math skills.
- Ability to edit and save g-code
- Familiarity with lean manufacturing, and continuous improvement techniques beneficial.
- Ability to stand and sit for long periods of time.
- Ability to comprehend geometric dimensioning and tolerancing.
- Materials Knowledge
- Must be able to interpret and work from industry specifications.
- Ability to interact appropriately with the public when necessary.
- Ability to calculate feeds and speeds
- Process
- Ability to schedule with department leads to set priorities
- Knowledge of the HAAS controllers a plus.
- Must understand the fundamentals of programming and design to communicate with ME's and Programmers
- Ability to adhere to workplace rules.
- Ability to read and interpret drawings.
- Ability to machine various metals such as Aluminum, Stainless Steel, Carbon Steel, Brass and Inconel.
- Ability to program using Mastercam
- CNC Machinist IV
- Ability to maintain sensitive and confidential information as required by government standards.
- Quality
- Math - functional to advanced understanding and practical application of trigonometry
- Tooling/Molds
- Safety
- May be required to lift up to 50 pounds in accordance with KUAS General Safety Training guidelines.
- Ability to interact effectively with peers and supervisors.
- Employee may generate, handle, manage, or work around hazardous materials and hazardous wastes.
- Proven experience handling and machining various honeycomb metal bond assemblies.
- Documentation
- Experience with Vericut software.
- Ability to work directly with ME's about the manufacturability of part designs
- Ability to save/move (familiarity with PC a must) various programs on an "as needed" basis.
- Standing, walking, bending, reaching and working from slightly elevated surface.
- Equipment
- Knowledge of cutters and effective use of cutters for maximum efficiency.
- Knowledge of commonly used concepts, practices, and procedures involving CNC machines.
- All Machinist III qualifications, plus 2 year's minimum programming experience.
- Experience performing 3D programming off solid models.
- Ability to verify NC programs using Vericut
- 8+ years hands-on experience in composite manufacturing CNC Machine Shop.
- Use of hand tools.
- Ability to quote hours and potential costs for tools/material to manufacture developmental parts
- Ability to train and mentor level I and II CNC Machinists.
What companies are hiring Cad Drafter jobs in Rio Linda,CA?
- Bell Bros
- PG&E Corporation
- Keysight Technologies
- CARVANA
- Teledyne
- Precision Fluid Controls
- Martin Sprocket & Gear
- CLEAR
- Safelite
- Kratos Defense
- Bell Bros
- PG&E Corporation
- Keysight Technologies
- CARVANA
- Teledyne
- Precision Fluid Controls
- Martin Sprocket & Gear
- CLEAR
- Safelite
- Kratos Defense
What is the hourly salary range for Cad Drafter jobs in Rio Linda,CA?
The hourly salary range is $21.97 - $73.78.
The hourly salary range is $21.97 - $73.78.
