Commute Time
Date Posted
Title
Job Type
Benefits
Pay
146 Cad Drafter jobs in San Jose,CA
Apply Directly
3D Print Technician
Keysight Technologies
San Jose, CA
Onsite
- Candidates who wish to be considered must be currently enrolled in an accredited college/university as of September 2026.
- Applicants who have graduated before September 2026 will not be considered unless they are starting a MS or PHD program after graduating.
- Mechanical aptitude and strong attention to detail
- High school diploma or equivalent
- Experience with Corel Draw design software.
- Experience with 3D printing technologies and materials
- Visa Sponsorship is not available for this position.
- 3D Print Technician
- Manual dexterity for handling small parts and tools
- Ability to lift up to 40 lbs.
- Familiarity with slicing software (e.g. Bambu Labs)
- Ability to troubleshoot technical issues
- Essentials: Experience with Bambu H2D, H2C and H2S printers.
Apply Directly
Dow - U.S. Apprentice Program
DOW
Hayward, CA 94541
~ 36 min OnsiteEducation Assistance
- Must have completed Algebra or Technical Math and Science coursework in High School, per graduation requirements.
- Completion of Chemistry and / or Physics coursework in High School is preferred.
- Be able to work all applicable shifts on a rotating basis (including weekends & holidays) and work overtime, when needed.
- Must be 18 years or older on or before your start date.
- After an offer of employment, but prior to date of hire, must complete college entrance exams / assessments at the community college to be attended. Must not be required to take any remedial or transitional coursework.
- Must have a current, valid US driver's license or the ability to obtain prior to your start date. Motor Vehicle Records check will be conducted to verify the status of your driver's license.
- A minimum of a High School Diploma or GED is required.
- A minimum requirement for this U.S. based position is the ability to work legally in the United States. No visa sponsorship/support is available for this position, including for any type of U.S. permanent residency (green card) process.
- If already enrolled in the degree program related to the field you applied for or have credits that would transfer toward it, individual must have no less than 2 full semesters remaining toward the applicable degree.
Apply Directly
Field Service Calibration Technician - Level 3 (General Purpose)
Trescal
San Jose, CA 95134
$33-$45/hr
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Experienced in calibrating several disciplines of test and measurement equipment such as, but not limited to: Physical, Dimensional & Electronics
- Ability to travel (mostly local, occasional overnight)
- Proficient computer skills including but not limited to Microsoft Office (Word & Excel), Internet research, data entry, etc.
- Minimum of 3 years of commercial or military laboratory experience
- Working knowledge of ISO/IEC 17025 and ANSI/NCSL Z540-1 requirements
- Clean driving record required
- Military training or experience (PMEL OR TMDE OR Electronics) OR an Associate's Degree in Electronics (or related technical field); OR equivalent work experience & training.
Apply Directly
Production Technician
Air Liquide
Fremont, CA 94538
~ 27 min Onsite
- Must be and remain clean shaven at all times for safety purposes
- Fitness for duty, including but not limited to: ability to lift 50 pounds and climb ladders
- Ability to communicate concisely and effectively in written and verbal formats with stakeholders at multiple levels in the business
- Ability to roll cylinders that weigh up to 200lbs - Rolling cylinders requires an individual to tilt a cylinder slightly with one hand, and use the other hand to move the cylinder forward by rolling it.
- Self-starter with the ability to perform well under pressure and changing priorities
- Ability to medically pass a respiratory test and physical test in order to wear a full face respirator as required
- Demonstrated positive attitude and safety-first attitude
- Ability to interact effectively with others to accomplish daily tasks and achieve the plant's goals
- Actively participate on ALAM's emergency response (ER) team including as an ER entry team member
- High School diploma or GED
- Ability to effectively and proficiently communicate both verbally and written in English
- Ability to work rotating shifts - day and/or nights as well as weekends and holidays
- Demonstrate ability to obtain proper assistance when confronted with problem situations
- Ability to wear a full face tight fitting respirator and a fully encapsulated (Level A) ER suit, Self Contained Breathing Apparatus (SCBA), or any other tight-fitting and/or supplied air respirators (SAR)
- Ability to learn technical chemical processes quickly in a fast paced, dynamic environment.
- Ability to perform technical troubleshooting to resolve process issues
Apply Directly
Production Technician (Day Shift)
Eaton Aerospace
Hayward, CA 94557
$23/hr
~ 36 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Only candidates that currently reside within 50 miles of the work location will be considered.
- Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.
- Minimum one year of experience in an assembly related role with the use of hand and/or power tools (experience in automotive repairs, construction, carpentry, or other assembly type environments will be considered)
- Must be able to interact and contribute in a small team environment and ability to flex according to production demands.
- Must be able to communicate effectively in all written and verbal formats (speech, writing, reading).
- Actively participate in health and safety training and demonstrate competency based on training received.
- Active-Duty Military Service member candidates are exempt from the geographical area limitation.
- Completion of a one-year Technical School diploma from an accredited institution.
- Must be able to work overtime as required.
- Keep yourself and teammates aware of health and safety practices and activities by actively observing fellow employee work practices and incorporating safety.
- Attend and actively participate in site meetings and trainings.
- Lift 35lbs. on a regular basis.
- Ability to follow manufacturing drawings and instructions.
New, Posted 1 hour ago
Apply Directly
Commit to Serve Your City Year! (Full Pay/Benefits – Academic Mentor)
City Year
Santa Clara, CA 95053
Paid Relocation to Santa Clara, CA
~ 14 min OnsiteChildcare AssistanceEducation AssistanceHealth Insurance
- Be a U.S. citizen or legal permanent resident (Authorization to work in the U.S. is not sufficient. Those with DACA status unfortunately are not eligible at this time)
- Agree to and complete a background check
- Be 17-25 by July 1, 2025
- Have a GED or high school diploma, some college experience, or college degree
- Have served no more than three terms in an AmeriCorps state or national program*
- Be able to begin City Year by July/August 2025 (specific start date varies by location)
Apply Directly
Production Technician - 2nd Shift
EnPro Industries
Milpitas, CA 95035
$22-$27/hr
~ 17 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Ability to adjust focus
- Work with hazardous materials
- Must be comfortable using computers for various workflows
- Must have demonstrated ability to follow instructions
- Close vision
- The employee is required to lift and/or move up to 30 pounds on a repetitive basis.
- Must have pride in his or her work and a quality orientation
- Color vision
- Handle delicate parts and equipment
- Generally, the incumbent must be able to sit/stand and use a computer for extended periods of time.
- Physical Demands: While performing the duties of this job, the employee is required to stand; walk; use hands to handle and feel; talk or hear and smell.
- Regularly lifting and/or moving up to 30 pounds.
Apply Directly
Silicon Valley -- Delivery Driver
Forkable Delivery
Palo Alto, CA 94301
$35/hr
~ 24 min Onsite
- Able to carry up to 30 lbs
- IPhone or Android smartphone
- 21+ year of age
- Valid driver's license, insurance, and clean driving record
- Car (4 doors)
New, Posted 23 hours ago
Easy Apply
Multifamily Construction Director
Ironcore Construction
San Jose, CA 95123
$180,000/yr
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Bachelor's degree in Construction Management, Civil Engineering, or a related field (or equivalent experience)
- Proficiency with Procore, MS Project, and Bluebeam
- Strong knowledge of construction means and methods, materials, and building regulations
- OSHA 30 certification preferred
- 5–10 years of experience managing multifamily construction projects
New, Posted 9 hours ago
Apply Directly
Field Event Sales Representative
Acosta Group
Milpitas, CA 95035
~ 17 min OnsiteBilingual Preferred
- High school diploma or general education degree (GED); or one to three months' related experience and/or training; or equivalent combination of education and experience.
- Reliable form of transportation (commuting/some travel is required)
- Language Skills: English is the primary language skill; however, bilingual skills may be required based on business necessity.
- Ability to lift up to 15lbs
- Proficient use of a Personal Computer and familiarity with Word, Excel, and Outlook; Daily access to the worldwide web with the ability to meet system requirements, printer and phone.
What companies are hiring Cad Drafter jobs in San Jose,CA?
- Keysight Technologies
- DOW
- Trescal
- Air Liquide
- Eaton Aerospace
- City Year
- EnPro Industries
- Forkable Delivery
- Ironcore Construction
- Acosta Group
- Keysight Technologies
- DOW
- Trescal
- Air Liquide
- Eaton Aerospace
- City Year
- EnPro Industries
- Forkable Delivery
- Ironcore Construction
- Acosta Group
What is the hourly salary range for Cad Drafter jobs in San Jose,CA?
The hourly salary range is $22 - $45.
The hourly salary range is $22 - $45.
