Commute Time
Date Posted
Title
Job Type
Benefits
Pay
1846 Cad Operator jobs in Broken Arrow,OK
New, Posted 10 hours ago
Apply Directly
Computer Field Technician
U.S. Navy
Broken Arrow, OK 74012
New, Posted 4 hours ago
Apply Directly
CNC Tool Maker - 1st shift
Hubbell Incorporated
Broken Arrow, OK 74014
Onsite
- Technical certification or degree in machining, manufacturing technology, or a related field is preferred.
- 2-4 years of experience in CAM programming and CNC machining with a proven track record of success in previous roles.
- Proficient understanding of advanced G-code functions, including canned cycles and tool radius compensation.
- Skilled in using CAM software to create detailed and accurate tool paths for various machining operations (e.g., 3D surfacing, high speed milling, multi-axis machining, Swiss).
- Basic knowledge of Geometric Dimensioning and Tolerancing (GD&T;).
- Experience with setting up and operating different types of CNC machines, including both mills and lathes.
- Understand material properties and select appropriate tooling (e.g., for aluminum, steel, titanium).
New, Posted 13 hours ago
Apply Directly
Assembler - Hiring Now
OIL STATES INDUSTRIES
Tulsa, OK 74146
~ 17 min Onsite
- Basic math skills
- Familiar with hand tools, bench equipment
- Basic verbal and written communication skills
- Reading comprehension skills
- Ability to work independently or in a team environment
- Able to exercise good judgement
- Ability to contribute towards the success of a team
- Moderate physical effort required.
- Frequent standing
- Prolonged sitting
- Repetitive motion of finger, wrist, elbow, shoulder or neck movement
- Frequent use of finger tips
- Lifting up to 20 pounds from floor to waist
- Ability to speak clearly
- Reaching/lifting while holding objects weighing up to 20 pounds
- Seeing to visually inspect, measure/assemble at a close distance
- This position is designated as a Safety Sensitive Position as defined by the Oklahoma Medical Marijuana and Patient Protection Act.
New, Posted 10 hours ago
Apply Directly
CNC Machinist
Solar Turbines Incorporated
Broken Arrow, OK 74012
OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Posses at least 10 years of machining experience.
- Experience with either Horizontal-Vertical lathes and/or Mills and/or Mill-Turn Machines.
- Ability to make all minor program changes if needed.
- Read and understand engineering routing and process drawings.
- Ability to determine when cutting tools are dull and should be changed or indexed.
- Ability to use measuring instruments, including but not limited to calipers, micrometers, height gauges, depth gauges, etc.
- Good working knowledge of math and minimal trigonometry.
- Ability to follow complex written and verbal instructions.
- Ability to read and comprehend drawings and shop routing.
- Any offer of employment is conditioned upon the successful completion of a drug screen.
New, Posted 8 hours ago
Easy Apply
Production Helper
Green Bay Packaging Tulsa Division
Tulsa, OK 74103
$21.09/hr
~ 17 min Onsite
- Exemplary attendance is a must.
- Must be able to read and use a tape measure.
- Must be able to lift and move up to 50 pounds.
- Must be able to pass a drug test and background check.
- High School or better
New, Posted 10 hours ago
Apply Directly
CNC Machinist
Ametek
Broken Arrow, OK 74012
Onsite
- High School Diploma or GED.
- Associate's degree (AA) or equivalent from an accredited two-year college or technical school; or 1-3 years related experience and/or training; or equivalent combination of education and experience.
- Familiar with close tolerances - .0001
New, Posted 13 hours ago
Apply Directly
Assembler I - 2nd Shift
Alfa Laval
Broken Arrow, OK 74012
$19-$21/hr
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- High School Diploma or GED, required
- Basic math skills including the ability to read a tape measure and calipers required
- Strong verbal and written English communication skills are required to ensure safe and effective performance of job duties. This includes the ability to understand and follow blueprints, safety instructions, hazard communications, and emergency procedures with clarity and confidence.
- Regularly exert up to 50 lbs of force occasionally: 30 lbs of force frequently
- Stands or walks 80% of workday.
- Required to have visual acuity to operate motor vehicles and/or heavy equipment.
- Lifting raw materials, assemblies, and equipment using lifts, or manually up to 50 lbs
- An overhead crane will be used for items over 50lbs.
- Individuals will be climbing ladders, bending squatting and using many mechanic type of tools.
- Mobility & Posture: Standing, walking, crouching, stooping, kneeling, and balancing on varied surfaces
- Manual Dexterity: Reaching, grasping, pushing, pulling, and lifting objects using upper body strength
- Fine Motor Skills: Repetitive motions involving wrists, hands, and fingers for precision tasks
- Communication: Clear verbal expressions and active listening to convey and receive detailed instructions
- Sensory Abilities: Adequate hearing to distinguish sounds and spoken communication in a work environment
- Must wear Personal Protective Equipment: steel toe boots, safety glasses, and ear plugs
- Exposure to outdoor weather, extreme heat or cold, loud noise, and vibration
- Work near hazards: moving machinery, vehicles, electrical currents, and chemicals
- Encounter atmospheric conditions: fumes, dust, gases, odors, and poor ventilation
- Operate in confined spaces such as narrow aisles or passageway
- The noise level in the work environment is often loud.
- Communicate effectively through speech and hearing
- Full compliance with all Alfa Laval policies and procedures is required to maintain a respectful, safe, and productive work environment.
New, Posted 10 hours ago
Apply Directly
Maintenance Technician
Greenheck Group
Tulsa, OK 74103
$35.38/hr
~ 17 min Onsite
- High School Diploma/GED.
- Position requires ability to move with ease in the production area; possess physical strength and stamina to remain in stationary/standing position for prolonged periods; use hands and fingers for potentially repetitive handling, gripping, and manipulating product, tools, and equipment; position oneself to complete work including bending, balancing, twisting, rotating, stooping, climbing, moving over uneven surfaces; push, pull and reach; and lift, carry, move or position objects up to 50 pounds regularly.
- Work is performed in a manufacturing environment with potential exposure to operating machinery with moving mechanical parts, airborne particles, forklift and crane operations, and vibration as well as varied exposure to noise.
- Personal protective equipment (PPE) including safety glasses, hearing protection, and safety toed footwear required.
- Additional PPE may be required based upon work.
- This is a safety-sensitive position, and impairment while performing the tasks or duties of this role could pose a health and safety risk to both the individual performing the tasks as well as those around them.
- Dependent upon location, the facility may or may not be a climate-controlled plant which could result in varied hot and cold temperatures swings at times.
- At least two years of mechanical maintenance experience
- Preferably in a metal fabrication or manufacturing environment.
- Ability to lift, up to 50 pounds
- Stand for up to 8 hours daily
- Proficiency with basic hand tools
- Power tools
- Measuring devices
- Strong mechanical aptitude.
- Basic computer skills for using maintenance software.
- Ability to read and understand blueprints
- Ability to read and understand electrical schematics
- Ability to read and understand equipment manuals.
- Strong problem-solving skills
- The ability to work independently.
- Willingness to work overtime as needed.
- Background in Maintenance Technician for Industrial Manufacturing
New, Posted 13 hours ago
Apply Directly
Assembler - Hiring Now
Dover Corporation
Jenks, OK 74037
~ 18 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- High school diploma or general education degree (GED); or one to three years related experience and/or training; or equivalent combination of education and experience.
- Must be able to travel as required and /or directed.
New, Posted 9 hours ago
Apply Directly
2nd and 3rd Shift Material Handler
Alro Steel
Tulsa, OK 74131
No Experience
What companies are hiring Cad Operator jobs in Broken Arrow,OK?
- U.S. Navy
- Hubbell Incorporated
- OIL STATES INDUSTRIES
- Solar Turbines Incorporated
- Green Bay Packaging Tulsa Division
- Ametek
- Alfa Laval
- Greenheck Group
- Dover Corporation
- Alro Steel
- U.S. Navy
- Hubbell Incorporated
- OIL STATES INDUSTRIES
- Solar Turbines Incorporated
- Green Bay Packaging Tulsa Division
- Ametek
- Alfa Laval
- Greenheck Group
- Dover Corporation
- Alro Steel
What is the hourly salary range for Cad Operator jobs in Broken Arrow,OK?
The hourly salary range is $19 - $35.38.
The hourly salary range is $19 - $35.38.
