Home My Resume Saved Jobs Matches Feedback

267 Carpentry Construction jobs in Norfolk,VA

Apply Directly

LEAD SHIPFITTER (CARPENTRY, FABRICATION) - MUST BE WILLING TO WORK WITH LEAD

HII

Newport News, VA 23608

$3,000 bonus

~ 37 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Work in small, tight, or confined spaces.
Clearance Required: No - Clearance Not Required to Start
Travel Requirement: No
Work assigned shift as production needs.
Kneel, squat, crawl, bend, stoop, and climb on a daily basis.
Candidates must be 18 years of age or older and legally eligible to work in the U.S.
US Citizenship Required for this Position: Yes
Take and pass a Physical Agility Test.
Climb ladders and work at extreme heights.
Work while repeatedly reaching overhead.
Work indoors or outdoors year-round in all weather conditions.
Work in areas with radiation.
Take and pass a respirator fit test.
Lift heavy objects weighing 40 lbs. or more.

SmartExplore AI is experimental.

Apply Directly

Rigger

The Contractor Consultants

Hampton, VA 23661

$35/hr

~ 25 min OnsiteHealth InsurancePaid Time OffRetirement Benefit

Rigger
Skilled with jacks, chain falls, and load balancing
Minimum 5 years of rigging experience, including machinery moving and crane assembly
Understanding of mechanical lifting concepts and center of gravity calculations
OSHA 30 Certification – Required
High school diploma or GED
Must be physically fit and able to handle long working hours and demanding conditions
Good driving record required
NCCCO Signalperson – Required
Must pass pre-employment drug screening and have no criminal record
Ability to read and execute detailed lift plans and permits
NCCCO Rigger Level 1 – Required

SmartExplore AI is experimental.

New, Posted 1 day ago

Apply Directly

Welder - Hiring Now

Oceaneering

Chesapeake, VA 23320

Requires TravelEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Knowledge and practical skills tests required.
Automated welding processes.
Lift 10-25 pounds
Identify color differences
Lift up to 10 pounds
Includes exposure to sounds and noise levels that are distracting or uncomfortable
Operate a motor vehicle
Must be a U.S. citizen who is not a dual citizen of any other country.
Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects
Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead
Requires working indoors in non-controlled environmental conditions
Frequent exposure to airborne dust, fumes, and gases
Involves heavy lifting, frequent stooping or bending and possible working assignments in overhead structures, confined spaces or beneath machinery.
Must have the ability to obtain government base access.
Requires working in very hot (above 90 F degrees) or very cold (below 32 F degrees) temperatures
Wear PPE protection for body, vision, and hearing protection
Work in confined spaces, kneel, jump, run, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands.
Must be able to obtain a Secret/Confidential security clearance.
Deep Submergence Systems (SOC MCD A, B, and C), SUBSAFE Qualification.
This position is considered MEDIUMwork.
Job tasks are performed in close physical proximity to other people
Strict adherence to safety, quality standards, good housekeeping habits, high level of critical thinking/reading comprehension, and frequent travel/overtime are required.
Qualify as a Welder/Workmanship Inspector in accordance with OII Process Instructions and welding procedures.
Lift 20-50 pounds
High School/GED with Apprenticeship Diploma and additional vocational courses or technical school graduate; and/or military and/or civilian experience with welding operations in a repair department or shipyard or fabrication shop.
Wear PPE for skin protection
Includes exposure to contaminants

SmartExplore AI is experimental.

Apply Directly

Painter Maintenance

General Dynamics Information Technology

Norfolk, VA 23503

OnsiteHealth InsurancePaid Time OffRetirement Benefit

1-3 years of related painting experience.
Exterior Design, Painting, Plastering
Education: High School Diploma/GED
US citizenship required
Experience 1 + years of related experience
Requires a High School Diploma, GED, or equivalent combination of education, technical training, or work experience.
US Citizenship Required: No
Paint and Lagging Experience per NAVSEA STANDARD ITEM 009-11 Title: Insulation and Lagging; accomplish

SmartExplore AI is experimental.

Apply Directly

Shipfitter Journeyperson-2603

NSC Staffing

Norfolk, VA 23523

OnsiteHealth InsuranceRetirement Benefit

Safely operate hand and power tools, including grinders, saws, and drills.
Proficiency in reading and interpreting structural drawings, including weld symbols and Navy damage control diagrams.
Ability to write clear Condition Found Reports (CFR) detailing the ship's material condition and recommended actions.
Strong comprehension of instructions, drawings, and correspondence.
Physical capability to wear required personal protective equipment (PPE) in compliance with OSHA standards.
Welding experience in SMAW, FCAW, and GMAW techniques.
Knowledge of structural shop fabrication equipment like shears, punches, and brakes.
Proficiency with oxy-acetylene torch cutting and washing.
In-depth understanding of ship repair terminology and compartment location nomenclature.
Strong mathematical skills for measurements using both US customary and metric systems.
Effective communication skills for conveying job-related information to supervisors and team members.
Minimum of four years of relevant experience.
Understanding of the aluminum 5XXX process.
Experience fabricating templates, squaring plates, and installing perpendiculars on ships.

SmartExplore AI is experimental.

Apply Directly

Shipfitter - Hiring Now

COLONNA'S SHIPYARD

Norfolk, VA 23503

OnsiteFlexible ScheduleHealth InsurancePaid Time OffRetirement Benefit

At least 2 years relative trades experience (or HS + 6 years trades experience)
Minimal Travel; 10% or less
Must have regular, reliable attendance
Must have knowledge of AWS D1.1 (Structural Steel) and NAVSEA code/requirements (MIL-STD-1688 & MIL-STD-1689)
At least 2 years of prior supervisory experience
Frequent exposure to noise due to machinery and equipment
Must have a Bachelors/Registered Apprentice (grad)
Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels
May ride ships at sea for extended periods
Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes
Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal
Must have at least one (1) year of experience in welding automation
Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation
Must have both welding and fitting experience in new industrial fabrication/new construction
Must have well-developed communication skills, both verbal and written, to effectively communicate with employees/leadership/customers and prepare/deliver written reports and correspondence
Dislocation support available on a case-by-case basis, up to $5,000.
Must be able to understand job specifications, drawings, and corresponding technical references years supervisory experience
Frequent use of respirator
Must be able to demonstrate ability to perform multi-pass, all position fillet and butt welds using SMAW (Shielded Metal Arc Welding), GMAW (Gas Metal Arc Welding), and FCAW (Flux Core Arc Welding)
Employee is required to operate trucks, forklifts & man-lifts
Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs
While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl

SmartExplore AI is experimental.

Apply Directly

Maintenance Trade Helper & General Laborer

Continental Tide Defense System

Norfolk, VA 23502

OnsiteRetirement Benefit

OSHA-10 training & have your OSHA-10 card
Must wear various types of personal protective equipment (PPE), such as hearing, eye, head, and hand protection, as required.
Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs.
Must possess a high school, trade or vocational school degree.
Must possess sufficient visual acuity, peripheral vision, depth perception, and night vision to inspect maritime components and systems, identify defects or irregularities, and safely operate tools and equipment.
Must have the ability to obtain base access and security credentials...e.g. DBIDS | NAVSEA Badge
Travel may be required within and outside of the continental United States.
Must be able to lift to 30 lbs., or more, climb ladders, and work in confined or elevated areas.
Required to visit project sites aboard ships and rigs, both onshore and offshore.
Due to export control regulations, this role is open to U.S. citizens only.

SmartExplore AI is experimental.

Apply Directly

Welder - Hiring Now

M.C. Dean

Chesapeake, VA 23322

Requires Travel

Aloft/Climbing / Climbing Shipyard Stairs and Ladders Certification
Apply general rules to specific problems to produce answers that make sense.
You must be a US Citizenship eligible for clearance
See details at close range (within a few feet of the observer).
A minimum of two to three years of applicable welding experience
Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).
Read and interpret specifications
Tell when something is wrong or is likely to go wrong. It does not involve solving the problem.
Work is primarily in San Diego, CA and Norfolk, VA but you may travel for extended periods to other shipyards in the USA and to other Navy ports outside the USA
ASNT NDT Level III Certification, or relevant experience.
May use a standard ladder without exceeding the weight limit while carrying tools.
High School Diploma or GED
Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.
Read and understand shipboard installation drawings, blueprints, and job orders
Shipyard Competent Person Certification
Lifts at least 100 pounds at one time and 60 pounds for an extended period of time.
Occupation Safety Haz-Mat Certification
Training and the Ability to Safely Lift and Move Objects of 50 LBS
Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.
Listen to and understand information and ideas presented through spoken words and sentences.
You must pass a background investigation
Supervisory and leadership skills
Weld parts together using gas welding, or brazing and any combination of arc welding processes
Repair broken or cracked parts, fill holes, and increase size of metal parts
Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.
Weld in all positions and for all types of metals and alloys in various shapes to include pipes, structural forms, plates, sheet metal, bar stock, machinery and equipment
Working in Confined Spaces Certification
Relocates a 12 foot stepladder without assistance.
One (1) other relevant technical certification or qualification such as American Welding Society (AWS) Certified Welding Supervisor, AWS Certified Weld Inspector, or other.
Use a variety of ARC and gas welding equipment to fabricate or repair products such as foundations, cable collars, cable/pipe/vent hangers, cable tube penetrations, studs, etc.
Perform thermal cutting and grinding
You must have a valid driver's license

SmartExplore AI is experimental.

Apply Directly

Welder - Hiring Now

PVI Holdings

Portsmouth, VA 23704

~ 13 min Onsite

Adjusting or moving objects up to 50 pounds in all directions
Must have a clear driving record in accordance to company driving guidelines
Required physical ability if mandated by customer or regulatory requirements
Successful completion of Welder workmanship class
Moving about to accomplish tasks
Assessing the accuracy, neatness and thoroughness of the job visually
Lifting: up to 50 pounds
A clear understanding of Welding safety
Demonstrate proficiency in company Welding procedures/specifications for welding 90/10 & 70/30 CuNi as well as grinding, prepping and fit-up when needed
Learn to weld with a rotary positioning table, adjusting settings on rotary table and weld machine after passing GTAW x-ray test with 90/10 pipe on the positioner
Bending, stooping, walking and climbing stairs
Repeating motions that may include the wrists, hands and/or fingers
Experience required for level II & level III welder
Welding trade school graduate or up to two years' experience as a certified welder
Remaining in a stationary position, often standing or sitting for prolonged periods
Operating machinery and/or power tools
5 or more years industry experience as a welder
Clear background check and drug/alcohol screening
Demonstrate GTAW skills.
Lift and carry: 50 pounds for 100 feet
Moving self in different positions to accomplish tasks in various environments
Operating motor vehicles or heavy equipment

SmartExplore AI is experimental.

Apply Directly

1st Class Pipefitter

Auxiliary Systems

Norfolk, VA 23504

Onsite

Must be able to pass a 5 panel drug screen.
Must be able to estimate material needs for the next day's work.
Must have knowledge and utilize proper tools to perform the job assignment.
Ability to properly target pipe spools.
Must be capable to read, comprehend and interpret blueprints.
Must meet certification requirements for manual torch brazing.
Must know how to read and interpret pipe drawings and calculate pipe requirements through the effective use of standard pipe formulas.
Must have basic hand tools applicable to your trade with bag or tote.
Must be eligible to obtain DBIDs.
Must be able to work in hazardous or irritating environments, confined spaces, and adverse weather or temperature conditions,
Must be able to wear and work in personnel protective equipment.
Must be able to read, write and comprehend instructions in written or spoken in English.
Must be reliable with a strong work ethic.
Must be able to work in, on, around, over and under fixed equipment and machinery;
Must be able to work from lifts, ladders, and scaffolding;
Must have reliable transportation.
Thorough knowledge of equipment, work processes and techniques used in measuring, fitting, and welding pipe.
Must be able to manipulate heavy equipment, tools and supplies and/or exert 50 lbs;
Working knowledge of piping systems on board marine vessels.
Must be able to concurrently manipulate multiple controls and machinery;
1st Class Pipefitter