Commute Time
Date Posted
Title
Job Type
Benefits
Pay
132 Cartographic Technician jobs in San Diego,CA
New, Posted 6 hours ago
Apply Directly
3D Print Technician
Keysight Technologies
San Diego, CA
Onsite
- Candidates who wish to be considered must be currently enrolled in an accredited college/university as of September 2026.
- Applicants who have graduated before September 2026 will not be considered unless they are starting a MS or PHD program after graduating.
- Mechanical aptitude and strong attention to detail
- High school diploma or equivalent
- Experience with Corel Draw design software.
- Experience with 3D printing technologies and materials
- Visa Sponsorship is not available for this position.
- 3D Print Technician
- Manual dexterity for handling small parts and tools
- Ability to lift up to 40 lbs.
- Familiarity with slicing software (e.g. Bambu Labs)
- Ability to troubleshoot technical issues
- Essentials: Experience with Bambu H2D, H2C and H2S printers.
New, Posted 19 hours ago
Apply Directly
Rigger - Shipyard
Ameri-Force
San Diego, CA 92154
$35/hr
OnsiteHealth Insurance
- Schedule for High Reach Class
- High school graduate or equivalent
- Five years experience at ship yards or five years experience as Boatswain Mate Second Class P. O. or above
- Start onboarding (per Labor Providers Policies/Procedures)
- DBIDS
- Good knowledge of all rigging equipment, ability to test shipboard and yard equipment
- Ability to work at heights and in confined spaces and to access and move around ship safely
- Ship Access
New, Posted 6 hours ago
Apply Directly
Shipboard Elevator/Conveyor Technician III
Epsilon Systems
San Diego, CA 92154
Onsite
- Must pass PQS 301 Craftsmen qualifications
- Ability to read technical manuals and repair standards
- Ability to obtain and maintain a DOD Secret Clearance
- Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces
- Requires working in the presence of noise
- Ability to read schematics and blue prints
- Ability to read, interpret, and follow detailed written instructions, MRC cards or drawings
- Ability to lift, carry and move objects up to 50 lbs in weight
- High school diploma or equivalent
- Minimum 4 years of work-related experience performing condition assessments, diagnostic inspections, fault isolation and repairs on the following systems: Elevator/Conveyor mechanical systems on US Navy and Coast Guard ships
- Required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boo
Apply Directly
Welder - Hiring Now
BAE Systems
San Diego, CA 92113
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Ability to accomplish welding processes aboard vessels and shops.
- Able to use hand tools and power tools safely and efficiently.
- High School Diploma or GED or equivalent experience.
- Requires a minimum of 3 years related experience in craft.
- Able to calculate and understand units of measure, including fractions and decimals.
- Able to read, write and comprehend simple instructions
- Able to apply common sense understanding to carry out instructions in written, oral or diagram form.
- Welding test will consist of full penetration butt weld test plates in three positions each; overhead (4G), vertical (3G) and horizontal position (2G).
- Able to work at heights, in confined spaces and have the ability to climb staircases and ladders of varying sizes and grades.
- Ability to work a variety of shifts as needed (1st shift 6:00 am to 2:30 pm, 2nd shift 3:00 pm to 11:00 pm)
- Have working experience with Military Standard 1689, DM 10-623B and CG-47 Crack Repair Manual.
- Full penetration welds 2G and 3G with ceramic backing, 4G with permanent backing.
- Ability to interpret and understand NAVSEA drawings/blueprints.
- Able to accurately use tape measure for measurements.
- Able to understand, read and interpret welding symbols based on the requirements of Military Standard 22-D
- Able to wear appropriate protective equipment, including respirator.
- Able to obtain DBIDS credential/Government clearance to enter US Navy Vessels.
- Able to physically perform essential job duties with or without accommodations.
- Able to carry personal tool bag weighing up to 50 lbs.
- Able to pass a hands-on welding practical test on SMAW, FCAW and GMAW-P (5XXX Aluminum) by way of x-ray NDT.
New, Posted 20 hours ago
Apply Directly
Welder - Hiring Now
Solar Turbines Incorporated
San Diego, CA 92101
OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Annual hearing conservation exam required
- Must be able to certify on pipe 6G position
- Must be able to recognize and avoid hazards and unsafe operation of equipment
- Must have ability to work in multiple areas of the shop and carry multiple certifications.
- High School Diploma, GED, or equivalent required
- Visa Sponsorship is not available for this position.
- Successful completion of a welding hands-on assessment is required to qualify for an interview.
- Any offer of employment is conditioned upon the successful completion of a drug screen.
- Annual eye exam required
- Proficient with a combination (not all required, but must hold multiple) of GMAW (MIG), DC/AC GTAW (TIG), FCAW (Flux Core), GMAW-P (Pulse MIG) operation
- And must be able to climb and work from ladders, scissor/man lifts, and scaffolds.
- Must pass and maintain required welding qualification tests.
- Proficient in welding with Duplex Material
- Must be able to certify on specified welding methods
- Must be fully able to read, comply and understand welding procedures
Apply Directly
Shipfitter - Hiring Now
Department of the Navy - Agency Wide
San Diego, CA 92101
Onsite
- Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
- Must be determined suitable for federal employment.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- This position requires the ability to climb vertical ladders and work in awkward positions and confined spaces.
- This is a bargaining unit position.
- You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
- You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
- Must participate in the direct deposit pay program.
- You will be required to obtain and maintain a U.S. Passport.
- Must be a US Citizen.
- You will be required to obtain and maintain a current valid United States driver's license.
- Males born after 12-31-59 must be registered for Selective Service.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- This is a Mission Essential position. You will be required to ensure organization or facility continuity of operations and/or completion of tasks that are considered essential to the mission designated by a local or command decision.
- This position requires the ability to lift and/or carry loads or items up to 50 pounds in weight.
- You may be required to successfully complete a pre-appointment physical examination and undergo recurring physical examinations.
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
New, Posted 6 hours ago
Apply Directly
Composite Technician I
General Atomics
San Diego, CA 92101
Onsite
- May require respirator certification.
- Capable of doing simple mathematical calculations
- Typically requires High School diploma or equivalent.
- Must be able to work in a loud environment
- Familiar with a variety of machinist hand tools and measuring instruments
- Must be able to verbally communicate, read and comprehend written and verbal instructions.
- Be able to lift assemblies weighing up to 50 lbs
- Must be familiar with blueprints and other similar drawings and documents
- Work extended hours as required
Apply Directly
Drive with Doordash - No CDL license needed
DoorDash
San Diego, CA
OnsiteFlexible Schedule
- 18+ years old
- Social security number (only in the US)
- Consistent access to a smartphone
- No CDL / commercial drivers license needed
- Driver's license number
New, Posted 12 hours ago
Apply Directly
Welder - Hiring Now
M.C. Dean
San Diego, CA 92101
Requires Travel
- Aloft/Climbing / Climbing Shipyard Stairs and Ladders Certification
- Apply general rules to specific problems to produce answers that make sense.
- See details at close range (within a few feet of the observer).
- Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).
- Read and interpret specifications
- Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
- May use a standard ladder without exceeding the weight limit while carrying tools.
- High School Diploma or GED
- Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.
- Read and understand shipboard installation drawings, blueprints, and job orders
- Shipyard Competent Person Certification
- Lifts at least 100 pounds at one time and 60 pounds for an extended period of time.
- Occupation Safety Haz-Mat Certification
- Training and the Ability to Safely Lift and Move Objects of 50 LBS
- Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.
- Listen to and understand information and ideas presented through spoken words and sentences.
- A minimum of three to five years of applicable welding experience
- You must pass a background investigation
- Weld parts together using gas welding, or brazing and any combination of arc welding processes
- Repair broken or cracked parts, fill holes, and increase size of metal parts
- Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.
- Weld in all positions and for all types of metals and alloys in various shapes to include pipes, structural forms, plates, sheet metal, bar stock, machinery and equipment
- Working in Confined Spaces Certification
- You will work at government facilities. You must be a US Citizenship eligible for clearance.
- Relocates a 12 foot stepladder without assistance.
- ASNT NDT Level II Certification, ore relevant experience.
- One (1) other relevant technical certification or qualification such as American Welding Society (AWS) Certified Welding Supervisor, AWS Certified Weld Inspector, or other.
- Use a variety of ARC and gas welding equipment to fabricate or repair products such as foundations, cable collars, cable/pipe/vent hangers, cable tube penetrations, studs, etc.
- Perform thermal cutting and grinding
- You must have a valid driver's license
Apply Directly
Welder - Hiring Now
Continental Tide Defense System
National City, CA 91950
~ 13 min OnsiteRetirement Benefit
- Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs.
- Must possess a high school, trade or vocational school degree.
- Must have the ability to obtain base access and security credentials.
- 5-10 years of direct experience in ship repair and installation of HM&E; systems and equipment.
- Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces.
- Must have or have the ability to obtain a SECRET clearance.
- Travel may be required within and outside of the continental United States.
- Due to export control regulations, this role is open to U.S. citizens only.
What companies are hiring Cartographic Technician jobs in San Diego,CA?
- Keysight Technologies
- Ameri-Force
- Epsilon Systems
- BAE Systems
- Solar Turbines Incorporated
- Department of the Navy - Agency Wide
- General Atomics
- DoorDash
- M.C. Dean
- Continental Tide Defense System
- Keysight Technologies
- Ameri-Force
- Epsilon Systems
- BAE Systems
- Solar Turbines Incorporated
- Department of the Navy - Agency Wide
- General Atomics
- DoorDash
- M.C. Dean
- Continental Tide Defense System
What is the hourly salary range for Cartographic Technician jobs in San Diego,CA?
The hourly salary range is $35 - $35.
The hourly salary range is $35 - $35.
