1100 Cnc Programmer jobs in Rockford,IL

Easy Apply

Laser Operator

Staff on Site

Rockton, IL 61072

~ 28 min Onsite

Education: Six months of commercial, vocational, or other specialized training beyond high school.
Experience: One to two years' work related experience in a manufacturing environment.
Manual Dexterity: Work requires moderate speed and accuracy.
Physical Effort: Work requires a considerable variety of steady active physical exertion.
Working Conditions: More frequent exposure to disagreeable features.
Hazards: Individuals with a pacemaker should never be around a Laser cutting machine. Exposure to hazards that may result in short-term work-related absences.

SmartExplore AI is experimental.

CNC Programmer

Woodward

Loves Park, IL 61111

~ 16 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

CNC Programmer
This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR). All applicants must be U.S. Persons within the meaning of the ITAR and EAR, or eligible to obtain all required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce
The ITAR defines a U.S. Person as a U.S. citizen or national, lawful permanent resident (i.e., 'Green Card holder'), or a protected person (e.g., asylee, or refugee)

SmartExplore AI is experimental.

CNC Machinist

Ingersoll Machine Tools

Rockford, IL 61101

Onsite

CNC Machinist
Level 1 Machinist: Ability to add, subtract, divide, and multiply
Level 1 Machinist: Ability to read and interpret simple production blueprints and sketches
Level 1 Machinist: Set-ups: Easy lift light > 30K lb. part with good pick points, no rolling, simple prismatic part with setup sheet
Level 1 Machinist: Line up and Startup: Simple lineup with proven programs and tooling
Level 1 Machinist: Modify the existing program to make part to print
Level 1 Machinist: Fine-tuning feed and speed by using the program
Level 1 Machinist: Work with Engineer for the machining process
Level 1 Machinist: Makes rough cuts, & verifies progress with precision measuring instruments
Level 1 Machinist: Break sharp corners after machining to ensure proper alignment of subsequent machining & safety of personnel when handling
Level 1 Machinist: Low tolerance finishing (Ra<6.3 and tolerance < +/- .03in.)
Level 1 Machinist: Inspection Tools: Use measuring tools tool to check the work being performed, Scale, Tape measure, 0 to 5 " OD Mic, Depth Mic., Dial Calipers
Level 1 Machinist: Tool Setting: Load tools into machine, Index and change tooling when tool become dull, Assist Tool Setter in assembling and determining what tools are needed to be set for the machine
Level 2 Machinist: Ability to solve more advanced problems and apply them to the job, Simple Trig, Speeds, and Feeds, and solve print math
Level 2 Machinist: Blueprint reading: the ability to read Ingersoll machine prints, tolerances, and a basic understanding of GDT
Level 2 Machinist: Set-ups: Parts with weight > 60K lb. Lifting and rolling simple prismatic parts, setup and lineup of rough and finished Ingersoll parts
Level 2 Machinist: Line up and startup of 3 or 4-axis parts. Set stock and check stock conditions. Prof new programs and tooling.
Level 2 Machinist: Feed rate/speed/RPM for quality part, G and M codes
Level 2 Machinist: Create and use advanced machine programming
Level 2 Machinist: Ability to calculate and edit speed and feed, work with programming
Level 2 Machinist: Makes necessary adjustments & complete machining operations
Level 2 Machinist: Higher tolerance finishing (All Ra finishes with Tolerances > +/- .010)
Level 2 Machinist: Inspection Tools: Use ID Mic, OD Mic., Height Gages, Go, NO-Go gages, Dial Bore Gages, Use machine to check sizes and location 3 axis.
Level 2 Machinist: Assemble and gauge all tools per TDM and on the fly tools as needed to complete machine operation. Work with engineering in tool selection and usage.
Export Control Compliance: Ingersoll Machine Tools, Inc. must comply with the export control laws and regulations of the United States. Under U.S. export control laws, restrictions apply to the release or disclosure within the United States of certain U.S.-origin technology or software source code to individuals who are not “U.S. Persons”. U.S. Persons include U.S. citizens, U.S. nationals, persons lawfully admitted for U.S. permanent residence (green card holders), and persons lawfully granted U.S. asylum or refugee status.
Physical Requirements: Prolonged periods they are standing, kneeling, bending, and climbing ladders or scaffolding.
Physical Requirements: Must be able to lift up to 60lbs daily.
Physical Requirements: Must be able to lift 100lbs weekly.