Commute Time
Date Posted
Title
Job Type
Benefits
Pay
184 Commercial Roofer jobs in San Diego,CA
Apply Directly
Assembler - Hiring Now
L3 Harris
San Diego, CA 92101
$22.83-$42.54/hr
OnsiteBilingual PreferredEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Able to lift minimum of 35 lbs.
- Able to work under Microscope.
- Ability to read assembly drawings, BOM, wire list, engineering change orders, rework instructions, and process control instructions
- Ability to obtain a US Security Clearance
- Basic hand soldering of SMT, through-hole, and wiring.
- Security clearances may only be granted to U.S. citizens.
- Mechanical assembly using crimping tool, hot plate and torque drivers.
- Requires a High School Diploma or equivalent and a minimum of 6 years of prior relevant experience or 2 years post-Secondary/Associates Degree with a minimium of 2 years of prior related experience.
- Able to work on ladder, crane and scaffolding.
Apply Directly
Assembler - Hiring Now
Solar Turbines Incorporated
San Diego, CA 92101
OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Willing to work any shift
- Any offer of employment is conditioned upon the successful completion of a drug screen
- High school diploma, GED, or equivalent
New, Posted 1 day ago
Apply Directly
Shipfitter Journeyperson (3rd Shift)
BAE Systems
San Diego, CA 92113
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Able to measure using a scale and tape measure
- Able to physically perform essential job duties with or without accommodations
- High School Diploma or GED
- Able to apply common sense understanding to carry out instructions in written, oral or diagram form
- Read, understand, and interpret advanced blueprints to preform task required
- Able to wear appropriate protective gear and use basic shipfitting tools
- Able to read, write and comprehend simple instructions
- Able to work at heights, in confined spaces and have the ability to climb staircases and ladders of varying sizes
- Able to calculate and understand units of measure, including fractions and decimals
- 3 Years of expirience required
Apply Directly
Production Assembler - 1st Shift
Ametek
San Diego, CA 92121
OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Must require a minimum of 3 - 5 years of related experience.
- Must be able to use hand tools (i.e. torque wrench, drills and inspection tools).
- Must be able to communicate effectively with others.
- Due to the nature of Programmable Power programs and products, applicants must have the legal right to work in the U.S. and additionally must be legally authorized to access export-controlled information and source code.
- This position requires the ability to lift 25 pounds.
- Must possess good to excellent assembly blueprint reading experience/skills.
- Assembler levels 1 - 5 will vary based on years of experience and scope of responsibility.
- Basic computer skills.
- High school diploma or equivalent
- Ability to properly read a variety of measuring devices including rulers, tape measures, and scales.
Apply Directly
Shipfitter
INTERNATIONAL MARINE AND INDUSTRIAL APPLICATORS
San Diego, CA 92101
$25-$34/hr
OnsiteHealth InsuranceRetirement Benefit
- Must have own basic skill related tools and equipment if not supplied by the workplace.
- Familiarity with the metric system
- The position requires a working knowledge of technical to include 1689 and 1688.
- Lift raw materials, final products, and items packed for shipment, manually (up to 60 pounds), or using a hoist.
- Ability to read and interpret documents furnished in written, oral, diagram or schedule form such as safety rules, operating and maintenance instructions, quality manuals and procedure manuals.
- Often works on scaffolds and ladders. To avoid injury, safety clothing is required along with safety devices to protect the eyes, head, or hearing.
- Ability to stand continuously for long periods of time.
- Ability to identify and measure material.
- Ability to read blueprints, drawings, calipers, tape measures and angle gauges.
- Ability to perform simple shop math, convert decimals to factional equivalents and fractions to decimal equivalents.
- Experience with steel, aluminum and/or stainless steel required.
- Ability to follow instructions given both verbally and in written form.
- Six months to one-year related experience and/or training
- Knowledge of machines and tools, including their designs and uses.
Apply Directly
Ramp Service Agent Part Time
American Airlines
San Diego, CA 92101
$20.63/hr
OnsiteHealth InsuranceRetirement Benefit
- Report to position on time, as scheduled, and at your assigned station or location, including mandatory overtime requirements, varying shifts, weekends, and holidays
- Lift, load, unload, and transport bags and cargo to/from aircraft's, bag carts, and conveyor belts
- Must be able to use basic computer skills
- Must be able to secure appropriate airport authority and/or US Customs security badges, if applicable
- Ability to obtain jet bridge certification
- Must have the ability to pass the US Postal Service background check
- Must be 18 years of age or older
- High school diploma or GED or international equivalent
- Applicable valid driver's license as required by local authorities
- Completion of a pre-employment drug screen, comprehensive background check and/or fingerprinting to satisfy company and security requirements
New, Posted 18 hours ago
Apply Directly
Shipfitter - Hiring Now
Department of the Navy - Agency Wide
San Diego, CA 92106
Requires Travel
- You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
- Must be determined suitable for federal employment.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.
- A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.
- The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE.
- You may be required to successfully complete a pre-appointment physical examination.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
- Must participate in the direct deposit pay program.
- Must be a US Citizen.
- This may be a bargaining unit position.
- Males born after 12-31-59 must be registered for Selective Service.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- Applicants will only be considered for positions within their own UIC. For example: If you're within UIC 4523A, you will only be considered for positions within 4523A.
- This position may require exposure to high noise levels.
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
New, Posted 5 hours ago
Apply Directly
Electrical Assembly II, 1st Shift
RTX
San Diego, CA 92123
$22-$25/hr
OnsiteFlexible ScheduleHealth InsurancePaid Time OffRetirement Benefit
- Lift, carry, or move components up to 25 lbs unassisted.
- U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.
- Minimum 1 year of production hand-soldering experience.
- Experience with electromechanical drawings, diagrams, and work instructions.
- Typically requires HS diploma (or equivalent, e.g. G.E.D. in the US) or vocational/technical education in related discipline with a minimum of 1 year of relevant experience.
- Read, interpret, and follow detailed work instructions, written procedures, electromechanical blueprints, wiring diagrams, and electronic schematics.
- Perform work primarily in a seated position; may also be required to stand, bend, squat, kneel, or climb ladders/step stools as needed.
- Minimum 1 year of relevant assembly or manufacturing experience.
New, Posted 5 hours ago
Apply Directly
Welder - Hiring Now
HII
San Diego, CA 92101
Requires TravelEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Must have welding experience with stick welding (SMAW) process in all positions from 2G to 6G for Carbon and Stainless Steel.
- Must have welding experience with gas metal arc welding (GMAW) process in all positions from 2G to 6G for Aluminum.
- Must have knowledge of quality control steps and procedures.
- Must be able to obtain medical clearance to wear a half-face respirator.
- Must be able to travel between 50% - 75% when not assigned to local tasking.
- Must have strong knowledge of reading and interpreting drawings, blueprints, weldments, technical manuals, engineering sketches, charts and/or work orders as well as written and verbal instruction for products to be fabricated and/or installed.
- Selected candidate will be required to travel to shipyards and military bases located around the country and abroad when not assigned to a local task.
- Must be capable of using various measuring instruments.
- Must be able to provide hand tools per trades designation.
- Must have experience working in a team environment.
- Must be able to obtain and maintain a DoD secret security clearance and maintain clearance level throughout employment.
- Must adhere to safety and quality procedures set forth by HII and host facilities.
- Candidate must be able to demonstrate welding ability on needed processes through qualification testing and pass with a satisfactory grade from our Quality Assurance Team within the first three weeks from start date for continued employment.
- Must have High School education or Trade School or equivalent, and 4 years of related experience.
- Must be able to obtain base access credentials within 60 days of start date and maintain credentials throughout employment.
Apply Directly
Assembler V
General Atomics
Poway, CA 92064
~ 26 min Onsite
- High school diploma or equivalent
- Familiarity with use of soldering and compression connection tools.
- Good visual perception and ability to distinguish between colors.
- Ability to obtain and maintain DoD Security clearance is required.
- Seven or more years experience.
- A comprehensive understanding of the general and specific aspects and technical phase of the job and their practical to complex applications to intricate problems.
- Good knowledge of computer operations and applications pertinent to the position.
- Extensive knowledge in specialized functions.
- The ability to work independently or in a team environment is essential as is the ability to work extended hours as required.
- The ability to read and interpret engineering drawing and wire lists.
What companies are hiring Commercial Roofer jobs in San Diego,CA?
- L3 Harris
- Solar Turbines Incorporated
- BAE Systems
- Ametek
- INTERNATIONAL MARINE AND INDUSTRIAL APPLICATORS
- American Airlines
- Department of the Navy - Agency Wide
- RTX
- HII
- General Atomics
- L3 Harris
- Solar Turbines Incorporated
- BAE Systems
- Ametek
- INTERNATIONAL MARINE AND INDUSTRIAL APPLICATORS
- American Airlines
- Department of the Navy - Agency Wide
- RTX
- HII
- General Atomics
What is the hourly salary range for Commercial Roofer jobs in San Diego,CA?
The hourly salary range is $20.63 - $42.54.
The hourly salary range is $20.63 - $42.54.
