Commute Time
Date Posted
Title
Job Type
Benefits
Pay
103 Construction Company jobs in Chula Vista,CA
New, Posted 1 day ago
Apply Directly
Rigger - Shipyard
Ameri-Force
San Diego, CA 92154
$35/hr
~ 20 min OnsiteHealth Insurance
- Schedule for High Reach Class
- High school graduate or equivalent
- Five years experience at ship yards or five years experience as Boatswain Mate Second Class P. O. or above
- Start onboarding (per Labor Providers Policies/Procedures)
- DBIDS
- Good knowledge of all rigging equipment, ability to test shipboard and yard equipment
- Ability to work at heights and in confined spaces and to access and move around ship safely
- Ship Access
Apply Directly
Welder - Hiring Now
BAE Systems
San Diego, CA 92113
~ 20 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Ability to accomplish welding processes aboard vessels and shops.
- Able to use hand tools and power tools safely and efficiently.
- High School Diploma or GED or equivalent experience.
- Requires a minimum of 3 years related experience in craft.
- Able to calculate and understand units of measure, including fractions and decimals.
- Able to read, write and comprehend simple instructions
- Able to apply common sense understanding to carry out instructions in written, oral or diagram form.
- Welding test will consist of full penetration butt weld test plates in three positions each; overhead (4G), vertical (3G) and horizontal position (2G).
- Able to work at heights, in confined spaces and have the ability to climb staircases and ladders of varying sizes and grades.
- Ability to work a variety of shifts as needed (1st shift 6:00 am to 2:30 pm, 2nd shift 3:00 pm to 11:00 pm)
- Have working experience with Military Standard 1689, DM 10-623B and CG-47 Crack Repair Manual.
- Full penetration welds 2G and 3G with ceramic backing, 4G with permanent backing.
- Ability to interpret and understand NAVSEA drawings/blueprints.
- Able to accurately use tape measure for measurements.
- Able to understand, read and interpret welding symbols based on the requirements of Military Standard 22-D
- Able to wear appropriate protective equipment, including respirator.
- Able to obtain DBIDS credential/Government clearance to enter US Navy Vessels.
- Able to physically perform essential job duties with or without accommodations.
- Able to carry personal tool bag weighing up to 50 lbs.
- Able to pass a hands-on welding practical test on SMAW, FCAW and GMAW-P (5XXX Aluminum) by way of x-ray NDT.
New, Posted 1 day ago
Apply Directly
Welder - Hiring Now
Solar Turbines Incorporated
San Diego, CA 92101
~ 20 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Annual hearing conservation exam required
- Must be able to certify on pipe 6G position
- Must be able to recognize and avoid hazards and unsafe operation of equipment
- Must have ability to work in multiple areas of the shop and carry multiple certifications.
- High School Diploma, GED, or equivalent required
- Visa Sponsorship is not available for this position.
- Successful completion of a welding hands-on assessment is required to qualify for an interview.
- Any offer of employment is conditioned upon the successful completion of a drug screen.
- Annual eye exam required
- Proficient with a combination (not all required, but must hold multiple) of GMAW (MIG), DC/AC GTAW (TIG), FCAW (Flux Core), GMAW-P (Pulse MIG) operation
- And must be able to climb and work from ladders, scissor/man lifts, and scaffolds.
- Must pass and maintain required welding qualification tests.
- Proficient in welding with Duplex Material
- Must be able to certify on specified welding methods
- Must be fully able to read, comply and understand welding procedures
New, Posted 11 hours ago
Apply Directly
Shipfitter
INTERNATIONAL MARINE AND INDUSTRIAL APPLICATORS
San Diego, CA 92101
$25-$34/hr
~ 20 min OnsiteHealth InsuranceRetirement Benefit
- Must have own basic skill related tools and equipment if not supplied by the workplace.
- Familiarity with the metric system
- The position requires a working knowledge of technical to include 1689 and 1688.
- Lift raw materials, final products, and items packed for shipment, manually (up to 60 pounds), or using a hoist.
- Ability to read and interpret documents furnished in written, oral, diagram or schedule form such as safety rules, operating and maintenance instructions, quality manuals and procedure manuals.
- Often works on scaffolds and ladders. To avoid injury, safety clothing is required along with safety devices to protect the eyes, head, or hearing.
- Ability to stand continuously for long periods of time.
- Ability to identify and measure material.
- Ability to read blueprints, drawings, calipers, tape measures and angle gauges.
- Ability to perform simple shop math, convert decimals to factional equivalents and fractions to decimal equivalents.
- Experience with steel, aluminum and/or stainless steel required.
- Ability to follow instructions given both verbally and in written form.
- Six months to one-year related experience and/or training
- Knowledge of machines and tools, including their designs and uses.
Apply Directly
Welder - Hiring Now
HII
San Diego, CA 92101
Requires TravelEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- High School education, or Trade School or equivalent, and 6 years of related experience.
- Ability to make decisions using sound judgment while complying with policies, procedure appropriate principles and applicable state and federal laws and regulations.
- Ability to read, interpret, and follow detailed oral and written instructions, schematics or drawings, technical documents, and to conduct activities in a safe manner.
- Travel may be required within and outside of the continental United States.
- May require wearing a respirator.
- Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels.
- Current or prior experience welding Shielded Metal Arc Welding (SMAW)/Stick, Gas Tungsten Arc Welding (GTAW)/TIG, and Gas Metal Arc Welding (GMAW)/MIG.
- Must be able to calibrate, and make minor repairs on tools/equipment.
- Must provide own hand tools as designated per trades specialty.
- Ability to obtain and maintain a DBIDS badge, Security Clearance, and must be a US Citizen.
- Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces.
- May ride ships at sea for extended periods.
- Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs.
Apply Directly
Welder - Hiring Now
Continental Tide Defense System
National City, CA 91950
~ 11 min OnsiteRetirement Benefit
- Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs.
- Must possess a high school, trade or vocational school degree.
- Must have the ability to obtain base access and security credentials.
- 5-10 years of direct experience in ship repair and installation of HM&E; systems and equipment.
- Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces.
- Must have or have the ability to obtain a SECRET clearance.
- Travel may be required within and outside of the continental United States.
- Due to export control regulations, this role is open to U.S. citizens only.
Apply Directly
Shipfitter - Hiring Now
Department of the Navy - Agency Wide
San Diego, CA 92101
~ 20 min Onsite
- Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
- Must be determined suitable for federal employment.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- This position requires the ability to climb vertical ladders and work in awkward positions and confined spaces.
- This is a bargaining unit position.
- You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
- You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
- Must participate in the direct deposit pay program.
- You will be required to obtain and maintain a U.S. Passport.
- Must be a US Citizen.
- You will be required to obtain and maintain a current valid United States driver's license.
- Males born after 12-31-59 must be registered for Selective Service.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- This is a Mission Essential position. You will be required to ensure organization or facility continuity of operations and/or completion of tasks that are considered essential to the mission designated by a local or command decision.
- This position requires the ability to lift and/or carry loads or items up to 50 pounds in weight.
- You may be required to successfully complete a pre-appointment physical examination and undergo recurring physical examinations.
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
Apply Directly
Welder - Hiring Now
Epsilon Systems
San Diego, CA 92101
$26.07-$32.30/hr
~ 20 min Onsite
- Ability to read, interpret, and follow detailed oral and written instructions, schematics or drawings and to conduct activities in a safe manner
- Knowledge of Qualify Craftsman 301 for civilians
- Minimum 5 years work related experience
- Frequent standing, sitting, crawling, kneeling, stooping, crouching, walking, handling, feeling with hands, reaching with arms
- Ability to qualify to SWRMC approved welding and brazing procedures
- High School diploma or equivalent
- Knowledge of design techniques, tools, and principals involved in production of precision technical plans, blueprints, drawings, and models
- Ability to make decisions using sound judgment while complying with policies, procedure appropriate principles and applicable state and federal laws and regulations
- Knowledge of machines and tools, including their designs, uses, repair, and maintenance
- Minimum 3 years specific experience as a qualified production welder
- Ability to read schematics, follow detailed instructions and be self-motivated
- Manual and finger dexterity; able to grasp, manipulate, assemble small objects
- Ability to communicate verbally and electronically
- Occasional lifting up to 50 pounds
- Noise conditions range from very quiet to very noisy
- Familiar with a variety of the field's concepts, practices, and procedures
- Ability to see details at close range (within a few feet of the observer)
- Ability to concentrate on a task over a period of time without being distracted
- Ability to obtain and maintain a DBIDS badge
New, Posted 11 hours ago
Apply Directly
Welder - Submarine Building
M.C. Dean
San Diego, CA 92101
Requires TravelEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Aloft/Climbing / Climbing Shipyard Stairs and Ladders Certification
- Read and interpret specifications
- May use a standard ladder without exceeding the weight limit while carrying tools.
- High School Diploma or GED
- Selected candidates must possess an acceptable driving record in accordance to our policy.
- Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.
- Read and understand shipboard installation drawings, blueprints, and job orders
- "You must have a valid driver's license."
- Shipyard Competent Person Certification
- You must be a US Citizenship eligible for clearance.
- Lifts at least 100 pounds at one time and 60 pounds for an extended period of time.
- You must pass a background investigation.
- Occupation Safety Haz-Mat Certification
- Training and the Ability to Safely Lift and Move Objects of 50 LBS
- Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.
- A minimum of five to six years of applicable welding experience
- Supervisory and leadership skills
- Weld parts together using gas welding, or brazing and any combination of arc welding processes
- Repair broken or cracked parts, fill holes, and increase size of metal parts
- Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.
- Weld in all positions and for all types of metals and alloys in various shapes to include pipes, structural forms, plates, sheet metal, bar stock, machinery and equipment
- Working in Confined Spaces Certification
- Relocates a 12 foot stepladder without assistance.
- Perform thermal cutting and grinding
New, Posted 1 day ago
Apply Directly
Shipfitter
Delphinus Engineering
Chula Vista, CA 91910
OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Frequently the employee is required to carry objects that might weigh up to 50 pounds.
- Equipment: General Hand Tools
- The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
- Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.
- High School diploma or GED.
- This position requires 1+ years of experience in the shipfitting trade.
- Must be able to successfully pass a criminal background check and obtain and maintain a security badge for all military installations and civilian shipyards as needed.
- While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear.
- Must be able to read and understand material safety data sheets (MDS).
- Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
- Computer Skills: Must possess basic computer skills to enter data into different data basis.
- Able to follow safety procedures.
What companies are hiring Construction Company jobs in Chula Vista,CA?
- Ameri-Force
- BAE Systems
- Solar Turbines Incorporated
- INTERNATIONAL MARINE AND INDUSTRIAL APPLICATORS
- HII
- Continental Tide Defense System
- Department of the Navy - Agency Wide
- Epsilon Systems
- M.C. Dean
- Delphinus Engineering
- Ameri-Force
- BAE Systems
- Solar Turbines Incorporated
- INTERNATIONAL MARINE AND INDUSTRIAL APPLICATORS
- HII
- Continental Tide Defense System
- Department of the Navy - Agency Wide
- Epsilon Systems
- M.C. Dean
- Delphinus Engineering
What is the hourly salary range for Construction Company jobs in Chula Vista,CA?
The hourly salary range is $25 - $35.
The hourly salary range is $25 - $35.
