Commute Time
Date Posted
Title
Job Type
Benefits
Pay
602 Control Engineer jobs in Los Angeles,CA
Apply Directly
Quality Control Inspector Specialist
Photo-Sonics
Chatsworth, CA 91311
~ 39 min Onsite
- High School Diploma or equivalent work experience required
- Position may require some climbing.
- Establishes proper receiving inspection process
- Discuss inspection results with those responsible for products. Recommends adjustments to the assembly or production process
- 7+ years of related quality control inspection experience.
- Writes detailed inspection reports
- Experience using an inspection arm required.
- Inspects and tests products through complete manufacturing process to ensure all production procedure specifications are met
- Detail Oriented
- Complies with AS9100 Quality management system
- Extensive knowledge of common inspection measuring equipment including, surface plates, micrometers, height gauges, radius gages, bore gauges, and dial indictors.
- Coordinate MRB reviews
- Operate electronic inspection equipment, such as coordinate-measuring machines (CMMs).
- Ability to interface effectively with all levels of personnel.
- Read and interpret information from planning documents, engineering drawings, quality control specifications, schematics, calibration reports and quality inspection procedures to develop accurate records of inspection
- Calibrating hand tools
- Inspects, tests, or measures materials or products being produced
- Experience with testing electrical devices; voltmeters, ammeters, and ohmmeters to test potential difference, current flow, and resistance.
- Coordinates calibration activities and maintain records of various tools, instruments and gauges used for Product acceptance or Verification/Validation
- Approves incoming materials by confirming specifications; conducting visual and measurement tests; rejecting and returning unacceptable materials
- Determines specifications by reading blueprints, specifications and other documents.
- Assist with developing, maintaining or updating employee work instructions & quality systems procedures to continuously improve existing processes
- Approves or rejects finished product
- Good communication skills
- Position requires ability to lift (15 lbs.), stand, walk for long periods of time.
- Experience in MS Excel
- Complies with ITAR/EAR
- Performs inspections using Precision Measurement equipment/devices
- Produces and processes NCMR reports
Apply Directly
Quality Inspector III
Howmet Aerospace
Torrance, CA 90505
~ 24 min OnsiteFlexible ScheduleHealth InsurancePaid Time OffRetirement Benefit
- Employee must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.
- This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.
- Minimum 3+ suggested years of total quality experience in manufacturing or relevant aerospace industry experience
- Visa sponsorship is not available for this position.
Apply Directly
Quality Control Inspector III
Motorola Solutions
Los Angeles, CA 90079
$26-$27/hr
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- High School Diploma or GED required.
- All employment is contingent upon the successful clearance of a background check.
- Kneeling or squatting to access lower shelves.
- Minimum 3 years of hands-on inspection experience with electronic components, mechanical assemblies, or similar systems.
- Demonstrates ability to read and interpret complex technical documentation, including schematics, mechanical drawings, BOMs, and routing diagrams.
- Walking/Moving in the labs.
- Advanced proficiency using inspection tools and test equipment (e.g., multi-meters, calipers, micrometers, microscopes, torque drivers).
- Capable of identifying, documenting, and communicating non-conformances and contributing to corrective/preventive actions.
- Strong experience inspecting against IPC standards (J-STD-001, IPC-A-610, IPC-A-620), with working knowledge of defect criteria and process controls.
- Occasional exposure to heat and cold.
- Proficient with Google Workspace and Microsoft Office for reporting, documentation, and communication.
- Must be able to lift up to 50 lbs. when receiving incoming part shipments.
- Must possess strong organizational skills, attention to detail, and the ability to manage multiple priorities in a fast-paced environment.
- Perform bending and reaching movements to place items on lower and higher shelves.
- Excellent written and verbal communication skills.
Apply Directly
Quality Assurance Inspector I
ARROWHEAD PRODUCTS CORPORATION
Los Alamitos, CA 90720
~ 31 min Onsite
- Requires 2+ years of related Quality Assurance inspection experience.
- Must be able to read and analyze engineering drawings and blueprints to determine requirements.
- Requires High School degree or GED.
- Push and pull 50 lbs.
- Must be familiar with AS9102 standards and software, and military specifications.
- Must be proficient in the use of basic inspection tools, calipers, scales, height gauges, optical aids, micrometers and GD&T.;
- Must have experience with production processes such as assembly, forming, tooling, welding (fusion & resistance), heat treat, cleaning
- ASQ Certified Quality Inspector (CQI) certification is expected to be achieved within 12 months from the first day of employment.
- Lift up to 50 lbs.
- Bend Occasionally
- Must have experience with production machinery and equipment such as press forming, tube bending and other fabrication.
- Experience must include interface with customer source representatives, government sources, internal departments and senior management.
- Must have knowledge of metallic materials such as stainless, nickel, titanium, aluminum.
- Must have experience with composites materials and production processes such as elastomers, resins, and composite reinforcement material.
- Working knowledge of NetInspect, Inspection Expert, AS9100, AS9101, Boeing, Northrop, Lockheed Martin, UTAS, Honeywell, and DCMA specifications.
- Sit, Stand, and Walk Frequently.
- US Citizenship or permanent residency.
Apply Directly
Repair Station Quality Manager
Moog
Torrance, CA 90504
$110,000-$150,000/yr
~ 24 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Bachelor's degree in engineering, aviation, or a technical discipline
- FAA regulations and guidance (Part 145, 21 as applicable)
- (or equivalent professional experience in regulated aerospace environments)
- Demonstrated ability to lead through influence, credibility, and regulatory authority
- Audit systems and corrective action methodologies
- Experience working in defense, aerospace, or highly regulated manufacturing/maintenance environments
- Minimum 5+ years in an FAA Part 145 repair station or equivalent maintenance organization, with demonstrated quality or regulatory leadership
- Quality management systems in aerospace environments
- Strong working knowledge of:
Apply Directly
Quality Inspector II
Hydraulics International
Chatsworth, CA 91311
~ 39 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Ability to interpret technical drawings and specifications.
- High school diploma or equivalent.
- Knowledge of quality control techniques and principles.
- Ability to use standard inspection equipment (calipers, micrometers, height gage, thread gages, etc..),
- Experience providing guidance and training to junior inspectors.
- Ability to work independently and in a team environment.
- Strong attention to detail and problem-solving skills.
- Minimum of 2-3 years of experience in a similar role.
Apply Directly
Quality Manager
Eaton Aerospace
Torrance, CA 90504
$125,000-$183,000/yr
~ 24 min OnsiteHealth InsuranceRetirement Benefit
- No relocation benefit is being offered for this position.
- ANSI ESD S20.20 knowledge.
- Advanced skills with MS Office software.
- Must be legally authorized to work in the United States without company sponsorship, now or in the future.
- Limited travel may be required (10%).
- Read and understand Blueprints, Specifications, and Requirements.
- Only candidates within a 50-mile radius of Torrance, CA will be considered.
- Active-Duty Military Service member candidates are exempt from the geographical area limitation.
- IPC and JST knowledge.
- Bachelor's degree from an accredited institution.
- Minimum of five (5) years experience in Quality or in a Manufacturing environment.
- Working knowledge of Quality Management Systems standards and Aerospace Regulatory Requirements.
- This position requires access to export-controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must be a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (green card holder), (iii) refugee under 8 U.S.C. 1157, or (iv) asylee under 8 U.S.C. 1158.
Apply Directly
Quality Inspector 2
Safran
Garden Grove, CA 92841
~ 40 min Onsite
- Experience: 4-7 years.
- Computer Skill: Familiar with Windows Operating System®. Basic skills with Microsoft office systems.
- Protracted or irregular hours may be required.
- More than 3 years
- Traveling may be required.
- Relocation to another Safran facility may be required.
- High School Diploma/GED Equivalent
- Must possess ability to use precision measuring instruments.
- Education: High school diploma or equivalent.
- Does require fluent communication in English language.
- Ability to effectively use inspection tools such as calipers, micrometers, tape measures, etc.
Apply Directly
Manufacturing Technician - Hiring Now
Nikon Corporation
Long Beach, CA 90808
~ 29 min OnsiteFlexible Schedule
- Knowledge of raw materials, production processes, quality control, and cost optimization techniques in additive manufacturing.
- Occasionally ascend/descend ladders.
- Familiarity with machines and tools used in additive manufacturing operations, including EOS and SLM equipment.
- REQUIRED: Compliant with the International Traffic in Arms Regulations (ITAR defines "U.S. Person" as a U.S. Citizen or U.S. Permanent Resident)
- Acquire proficiency in technical material related to additive manufacturing and machine maintenance.
- REQUIRED: Obtain and maintain a security clearance.
- REQUIRED: Compliant with the International Traffic in Arms Regulations (ITAR) which requires U.S. person status (ITAR defines "U.S. Person" as a U.S. Citizen or U.S. Permanent Resident)
- Move, position, lift, and stack parts weighing up to 50 pounds on a daily basis.
- Utilize digital applications on interfaces like tablets or smartphones proficiently.
- Regularly push carts, RUWAC vacuums, and other machinery throughout the facility.
- Properly wear personal protective gear throughout the day, including gloves, hearing protection, eye protection, protective footwear, and respirators.
- Communicate with teammates and internal stakeholders regularly regarding daily updates, hazard concerns, questions, and issues.
- REQUIRED: Able to work flexible hours, according to the schedule of the machine builds
- Maintain a stationary position for up to three hours as needed.
- Utilize precision measuring instruments such as calipers, micrometers, and dial indicators.
- Proficiency with various pneumatic and hand tools.
Apply Directly
Quality Control Supervisor
LEACH International Corporation
Buena Park, CA 90620
~ 27 min Onsite
- ISO 9001 or AS 9100 basic knowledge
- Must be authorized to work in the U.S. To conform to U.S. Export Control Regulations, applicant should be eligible for any required authorization from the U.S. Government.
- Must have very good understanding of inspection practices and methods as required in a leading manufacturer supplying high reliability assemblies to the aerospace industry.
- Train the Trainer Solder Certification
- Bachelor's degree or equivalent education.
- Knowledge of ERP system with respect to transactions and Quality Control
- FAA Part 145 basic knowledge
- Ability to work with MS Word and EXCEL
- Ability to interpret engineering drawings per GD&T; ASME Y14.5
- Must have the ability to simultaneously handle multiple projects and tasks.
- Actively certified to IPC-A-610, IPC-A-620, J-STD-001
- NADCAP Special Processing basic knowledge
- Ability to interpret manufacturing and engineering specifications
- Ability to use various measurement equipment to verify conformance
- At least 5 years' experience in the inspection of electro-mechanical parts and assemblies, with at least two years in a supervisory or lead position.
What companies are hiring Control Engineer jobs in Los Angeles,CA?
- Photo-Sonics
- Howmet Aerospace
- Motorola Solutions
- ARROWHEAD PRODUCTS CORPORATION
- Moog
- Hydraulics International
- Eaton Aerospace
- Safran
- Nikon Corporation
- LEACH International Corporation
- Photo-Sonics
- Howmet Aerospace
- Motorola Solutions
- ARROWHEAD PRODUCTS CORPORATION
- Moog
- Hydraulics International
- Eaton Aerospace
- Safran
- Nikon Corporation
- LEACH International Corporation
What is the hourly salary range for Control Engineer jobs in Los Angeles,CA?
The hourly salary range is $26 - $27.
The hourly salary range is $26 - $27.
