Home My Resume Saved Jobs Matches Feedback

143 Cost Estimator jobs in San Diego,CA

New, Posted 2 hours ago

Apply Directly

Composite Technician I

General Atomics

San Diego, CA 92101

Onsite

May require respirator certification.
Capable of doing simple mathematical calculations
Typically requires High School diploma or equivalent.
Must be able to work in a loud environment
Familiar with a variety of machinist hand tools and measuring instruments
Must be able to verbally communicate, read and comprehend written and verbal instructions.
Be able to lift assemblies weighing up to 50 lbs
Must be familiar with blueprints and other similar drawings and documents
Work extended hours as required

SmartExplore AI is experimental.

Apply Directly

Shipfitter - Hiring Now

Department of the Navy - Agency Wide

San Diego, CA 92101

Onsite

Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
Must be determined suitable for federal employment.
New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
This position requires the ability to climb vertical ladders and work in awkward positions and confined spaces.
This is a bargaining unit position.
You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
Must participate in the direct deposit pay program.
You will be required to obtain and maintain a U.S. Passport.
Must be a US Citizen.
You will be required to obtain and maintain a current valid United States driver's license.
Males born after 12-31-59 must be registered for Selective Service.
You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
This is a Mission Essential position. You will be required to ensure organization or facility continuity of operations and/or completion of tasks that are considered essential to the mission designated by a local or command decision.
This position requires the ability to lift and/or carry loads or items up to 50 pounds in weight.
You may be required to successfully complete a pre-appointment physical examination and undergo recurring physical examinations.
Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.

SmartExplore AI is experimental.

New, Posted 2 hours ago

Apply Directly

3D Print Technician

Keysight Technologies

San Diego, CA

Onsite

Candidates who wish to be considered must be currently enrolled in an accredited college/university as of September 2026.
Applicants who have graduated before September 2026 will not be considered unless they are starting a MS or PHD program after graduating.
Mechanical aptitude and strong attention to detail
High school diploma or equivalent
Experience with Corel Draw design software.
Experience with 3D printing technologies and materials
Visa Sponsorship is not available for this position.
3D Print Technician
Manual dexterity for handling small parts and tools
Ability to lift up to 40 lbs.
Familiarity with slicing software (e.g. Bambu Labs)
Ability to troubleshoot technical issues
Essentials: Experience with Bambu H2D, H2C and H2S printers.

SmartExplore AI is experimental.

New, Posted 2 hours ago

Apply Directly

Shipboard Elevator/Conveyor Technician III

Epsilon Systems

San Diego, CA 92154

Onsite

Must pass PQS 301 Craftsmen qualifications
Ability to read technical manuals and repair standards
Ability to obtain and maintain a DOD Secret Clearance
Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces
Requires working in the presence of noise
Ability to read schematics and blue prints
Ability to read, interpret, and follow detailed written instructions, MRC cards or drawings
Ability to lift, carry and move objects up to 50 lbs in weight
High school diploma or equivalent
Minimum 4 years of work-related experience performing condition assessments, diagnostic inspections, fault isolation and repairs on the following systems: Elevator/Conveyor mechanical systems on US Navy and Coast Guard ships
Required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boo

SmartExplore AI is experimental.

Apply Directly

Welder - Hiring Now

BAE Systems

San Diego, CA 92113

OnsiteHealth InsurancePaid Time OffRetirement Benefit

Ability to accomplish welding processes aboard vessels and shops.
Able to use hand tools and power tools safely and efficiently.
High School Diploma or GED or equivalent experience.
Requires a minimum of 3 years related experience in craft.
Able to calculate and understand units of measure, including fractions and decimals.
Able to read, write and comprehend simple instructions
Able to apply common sense understanding to carry out instructions in written, oral or diagram form.
Welding test will consist of full penetration butt weld test plates in three positions each; overhead (4G), vertical (3G) and horizontal position (2G).
Able to work at heights, in confined spaces and have the ability to climb staircases and ladders of varying sizes and grades.
Ability to work a variety of shifts as needed (1st shift 6:00 am to 2:30 pm, 2nd shift 3:00 pm to 11:00 pm)
Have working experience with Military Standard 1689, DM 10-623B and CG-47 Crack Repair Manual.
Full penetration welds 2G and 3G with ceramic backing, 4G with permanent backing.
Ability to interpret and understand NAVSEA drawings/blueprints.
Able to accurately use tape measure for measurements.
Able to understand, read and interpret welding symbols based on the requirements of Military Standard 22-D
Able to wear appropriate protective equipment, including respirator.
Able to obtain DBIDS credential/Government clearance to enter US Navy Vessels.
Able to physically perform essential job duties with or without accommodations.
Able to carry personal tool bag weighing up to 50 lbs.
Able to pass a hands-on welding practical test on SMAW, FCAW and GMAW-P (5XXX Aluminum) by way of x-ray NDT.

SmartExplore AI is experimental.

New, Posted 16 hours ago

Apply Directly

Rigger - Shipyard

Ameri-Force

San Diego, CA 92154

$35/hr

OnsiteHealth Insurance

Schedule for High Reach Class
High school graduate or equivalent
Five years experience at ship yards or five years experience as Boatswain Mate Second Class P. O. or above
Start onboarding (per Labor Providers Policies/Procedures)
DBIDS
Good knowledge of all rigging equipment, ability to test shipboard and yard equipment
Ability to work at heights and in confined spaces and to access and move around ship safely
Ship Access

SmartExplore AI is experimental.

New, Posted 1 hour ago

Apply Directly

Shipfitter

INTERNATIONAL MARINE AND INDUSTRIAL APPLICATORS

San Diego, CA 92101

$25-$34/hr

OnsiteHealth InsuranceRetirement Benefit

Must have own basic skill related tools and equipment if not supplied by the workplace.
Familiarity with the metric system
The position requires a working knowledge of technical to include 1689 and 1688.
Lift raw materials, final products, and items packed for shipment, manually (up to 60 pounds), or using a hoist.
Ability to read and interpret documents furnished in written, oral, diagram or schedule form such as safety rules, operating and maintenance instructions, quality manuals and procedure manuals.
Often works on scaffolds and ladders. To avoid injury, safety clothing is required along with safety devices to protect the eyes, head, or hearing.
Ability to stand continuously for long periods of time.
Ability to identify and measure material.
Ability to read blueprints, drawings, calipers, tape measures and angle gauges.
Ability to perform simple shop math, convert decimals to factional equivalents and fractions to decimal equivalents.
Experience with steel, aluminum and/or stainless steel required.
Ability to follow instructions given both verbally and in written form.
Six months to one-year related experience and/or training
Knowledge of machines and tools, including their designs and uses.

SmartExplore AI is experimental.

New, Posted 10 hours ago

Apply Directly

Techador Oficial (Journeyman)

Ideal Roofing Waterproofing

Spring Valley, CA 91976

Requires Travel

Licencia de conducir válida y récord de manejo limpio
Dominio comprobado de múltiples sistemas de techado y técnicas de instalación
Mínimo 3 años de experiencia en techado comercial
Cómodo trabajando en alturas, escaleras y en condiciones físicas al aire libre
Habilidad sólida para diagnosticar filtraciones y resolver problemas
Persona confiable, detallista y capaz de trabajar de forma independiente o en equipo

SmartExplore AI is experimental.

New, Posted 1 day ago

Apply Directly

Welder - Hiring Now

HII

San Diego, CA 92101

Requires TravelEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

High School education, or Trade School or equivalent, and 6 years of related experience.
Ability to make decisions using sound judgment while complying with policies, procedure appropriate principles and applicable state and federal laws and regulations.
Ability to read, interpret, and follow detailed oral and written instructions, schematics or drawings, technical documents, and to conduct activities in a safe manner.
Travel may be required within and outside of the continental United States.
May require wearing a respirator.
Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels.
Current or prior experience welding Shielded Metal Arc Welding (SMAW)/Stick, Gas Tungsten Arc Welding (GTAW)/TIG, and Gas Metal Arc Welding (GMAW)/MIG.
Must be able to calibrate, and make minor repairs on tools/equipment.
Must provide own hand tools as designated per trades specialty.
Ability to obtain and maintain a DBIDS badge, Security Clearance, and must be a US Citizen.
Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces.
May ride ships at sea for extended periods.
Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs.

SmartExplore AI is experimental.

New, Posted 8 hours ago

Apply Directly

Welder - Hiring Now

M.C. Dean

San Diego, CA 92101

Requires Travel

Aloft/Climbing / Climbing Shipyard Stairs and Ladders Certification
Apply general rules to specific problems to produce answers that make sense.
See details at close range (within a few feet of the observer).
Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).
Read and interpret specifications
Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
May use a standard ladder without exceeding the weight limit while carrying tools.
High School Diploma or GED
Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.
Read and understand shipboard installation drawings, blueprints, and job orders
Shipyard Competent Person Certification
Lifts at least 100 pounds at one time and 60 pounds for an extended period of time.
Occupation Safety Haz-Mat Certification
Training and the Ability to Safely Lift and Move Objects of 50 LBS
Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.
Listen to and understand information and ideas presented through spoken words and sentences.
A minimum of three to five years of applicable welding experience
You must pass a background investigation
Weld parts together using gas welding, or brazing and any combination of arc welding processes
Repair broken or cracked parts, fill holes, and increase size of metal parts
Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.
Weld in all positions and for all types of metals and alloys in various shapes to include pipes, structural forms, plates, sheet metal, bar stock, machinery and equipment
Working in Confined Spaces Certification
You will work at government facilities. You must be a US Citizenship eligible for clearance.
Relocates a 12 foot stepladder without assistance.
ASNT NDT Level II Certification, ore relevant experience.
One (1) other relevant technical certification or qualification such as American Welding Society (AWS) Certified Welding Supervisor, AWS Certified Weld Inspector, or other.
Use a variety of ARC and gas welding equipment to fabricate or repair products such as foundations, cable collars, cable/pipe/vent hangers, cable tube penetrations, studs, etc.
Perform thermal cutting and grinding
You must have a valid driver's license