Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
Must be determined suitable for federal employment.
New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
This position requires the ability to climb vertical ladders and work in awkward positions and confined spaces.
This is a bargaining unit position.
You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
Must participate in the direct deposit pay program.
You will be required to obtain and maintain a U.S. Passport.
Must be a US Citizen.
You will be required to obtain and maintain a current valid United States driver's license.
Males born after 12-31-59 must be registered for Selective Service.
You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
This is a Mission Essential position. You will be required to ensure organization or facility continuity of operations and/or completion of tasks that are considered essential to the mission designated by a local or command decision.
This position requires the ability to lift and/or carry loads or items up to 50 pounds in weight.
You may be required to successfully complete a pre-appointment physical examination and undergo recurring physical examinations.
Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.

SmartExplore AI is experimental.

Apply Directly

3D Print Technician

Keysight Technologies

San Diego, CA

Onsite

Candidates who wish to be considered must be currently enrolled in an accredited college/university as of September 2026.
Applicants who have graduated before September 2026 will not be considered unless they are starting a MS or PHD program after graduating.
Mechanical aptitude and strong attention to detail
High school diploma or equivalent
Experience with Corel Draw design software.
Experience with 3D printing technologies and materials
Visa Sponsorship is not available for this position.
3D Print Technician
Manual dexterity for handling small parts and tools
Ability to lift up to 40 lbs.
Familiarity with slicing software (e.g. Bambu Labs)
Ability to troubleshoot technical issues
Essentials: Experience with Bambu H2D, H2C and H2S printers.

SmartExplore AI is experimental.

Apply Directly

Technician I - Corrosion and Control

Vision Point Systems

San Diego, CA 92154

$23.31/hr

Requires TravelHealth InsurancePaid Time OffRetirement Benefit

Ability to work well on a team.
During long-durations, CST technicians are required to wear and use company provided personal protective equipment (PPE), which includes but is not limited to: safety goggles, hand protection, and respirator equipment, etc.
Ability to take directions and perform corrective action plans.
Possess knowledge of mechanical systems.
Able to multitask, prioritize, and manage time efficiently.
Hold or be capable of passing a background check to receive identification credentials through the Defense Biometric Identification System.
High School diploma or equivalent, and/or a vocational degree.
Requires travel to local bases such as Miramar and on occasion, 29 Palms. Other longer term travel could be required when requested by the client.
Within 60-days of hire, CST technicians are required to successfully complete CPAC certification.
Ability to prioritize tasks.
Able to understand/follow instructions and communicate effectively.
CST technicians must have a working knowledge of all procedures, responsibilities, and billets within the CST.
At various intervals, this job requires you to report to different locations on Camp Pendleton (different units).
On a given day, CST technicians are required to wear either a dust mask or fitted respirator (depending upon the task performed) to apply Corrosion Preventive Compounds (CPCs) and/or Surface Preparation and Touch-Up Paint.
During moderate-durations, CST technicians are required to mount and dismount military and support equipment of varying heights safely.
Completion of this online course is required within one year of employment and before recertification.
CST technicians must complete the Defense Acquisition University, Continuous Learning Module; Corrosion Prevention and Control Overview (CLM 038).
Pay strict attention to detail.
The employer will ensure service technicians undergo an annual OSHA 1910.134 App A Quantitative Respirator Fit Test.
During short-durations, CST technicians are required to lift to 50 pounds safely.
Possess a valid state driver's license.
During long-durations, CST technicians are required to work in outdoor weather conditions (hot, cold, rain, etc.).

SmartExplore AI is experimental.

Apply Directly

Travel Operating Room Scrub Tech - $1,967 per week

Sharp HealthCare - 7901 Frost Street

San Diego, CA 92154

$1,967/wk

New, Posted 1 day ago

Apply Directly

Welder - Hiring Now

BAE Systems

San Diego, CA 92113

OnsiteHealth InsurancePaid Time OffRetirement Benefit

Ability to accomplish welding processes aboard vessels and shops.
Able to use hand tools and power tools safely and efficiently.
High School Diploma or GED or equivalent experience.
Requires a minimum of 3 years related experience in craft.
Able to calculate and understand units of measure, including fractions and decimals.
Able to read, write and comprehend simple instructions
Able to apply common sense understanding to carry out instructions in written, oral or diagram form.
Welding test will consist of full penetration butt weld test plates in three positions each; overhead (4G), vertical (3G) and horizontal position (2G).
Able to work at heights, in confined spaces and have the ability to climb staircases and ladders of varying sizes and grades.
Ability to work a variety of shifts as needed (1st shift 6:00 am to 2:30 pm, 2nd shift 3:00 pm to 11:00 pm)
Have working experience with Military Standard 1689, DM 10-623B and CG-47 Crack Repair Manual.
Full penetration welds 2G and 3G with ceramic backing, 4G with permanent backing.
Ability to interpret and understand NAVSEA drawings/blueprints.
Able to accurately use tape measure for measurements.
Able to understand, read and interpret welding symbols based on the requirements of Military Standard 22-D
Able to wear appropriate protective equipment, including respirator.
Able to obtain DBIDS credential/Government clearance to enter US Navy Vessels.
Able to physically perform essential job duties with or without accommodations.
Able to carry personal tool bag weighing up to 50 lbs.
Able to pass a hands-on welding practical test on SMAW, FCAW and GMAW-P (5XXX Aluminum) by way of x-ray NDT.

SmartExplore AI is experimental.

New, Posted 1 hour ago

Apply Directly

Hull Welder Repair/Fabrication Technician I

Epsilon Systems

Imperial Beach, CA 91932

$26.07-$31/hr

~ 23 min Onsite

Possess moderate understanding of technical requirements.
Possess or ability to obtain and maintain a secret clearance.
Job may require bending, stooping, lifting, and will be in an environment of low and high temperatures.
High school diploma or equivalent
Ability to work in a field environment for extended periods (and in some cases, areas of extreme heat and humidity such as Guam, Djibouti, Bahrain, etc).
Travel may be required within and outside of the continental United States.
Ability to work in a team environment and be flexible.
Ability to be able to work in maintenance shop environment
Ability to obtain a US Passport.
Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions.
Ability to travel overseas when required.
Minimum of 3 years of experience repairing and troubleshooting hull damage to rails, hull, structure, cabin tops and any other metal areas relating to heavy equipment and boats.
Ability to lift, carry and transport heavy equipment and boxes up to 50 lbs.

SmartExplore AI is experimental.

Apply Directly

Composite Technician I

General Atomics

San Diego, CA 92101

Onsite

May require respirator certification.
Capable of doing simple mathematical calculations
Typically requires High School diploma or equivalent.
Must be able to work in a loud environment
Familiar with a variety of machinist hand tools and measuring instruments
Must be able to verbally communicate, read and comprehend written and verbal instructions.
Be able to lift assemblies weighing up to 50 lbs
Must be familiar with blueprints and other similar drawings and documents
Work extended hours as required

SmartExplore AI is experimental.