1604 Director Systems Engineering jobs in Houston,TX

Must possess or be able to obtain a TWIC (Transportation Worker Identification Credential) as required by the Maritime Transportation Security Act.
Bachelor's degree in Engineering, Mechanical Engineer or similar degree required
Minimum of 15 years of relevant projects experience
Minimum of 8 years technical management experience
Good knowledge and experience of cost estimating software utilization
Good knowledge and experience of CAD software utilization
Expert (+15 years) - Development, definition and implementation of Front-End Loading (FEL I, II & III)
Expert (+15 years) - New and existing technology in relation to green/brownfield terminal development
Expert (+15 years) - Industry technologies related to storing & handling of Oil, Gas & Chemical and bulk liquids
Expert - Relevant industry standards and practices (e.g. API, NFPA, PIANC, etc.).
Expert - Support and provide advice during development of the conceptual design, functional requirements and Basis of Design (BoD) in close coordination with Project Team
Experience in the oil and gas industry & chemicals
Experience & knowledge in (1) managing simultaneously several projects
(2) contract management
(3) stakeholders' management
(4) interface management.
Capable of managing several projects and follow VPM stage-gate process
Works closely together with Vopak Global Engineering
Inform Managing Director, Project Owners of project progress and main issues
Provide solutions to keep projects on-track
Must have comprehensive knowledge of project management and contract management to ensure contractors perform per Vopak Quality and Safety standards.
Support project owner identifying project technical staffing requirements to support projects
Review and validate Project Management plans
Initiate and organize key project reviews and ensure all Divisional & Global reviews are implemented and complete per VPM methodology
Ensure Internal Customer input is documented and included in BOD.
Ensure projects maintain a Decision log
Ensure full compliance with permits and regulatory requirements.
Ensure full compliance to Vopak minimum technical, local regulations and operational standards
Knowledgeable in risk management and capable of using the outcome of project risk assessment to improve project execution until the end of the project.
At least 15 years in projects engineering experience & knowledge in Oil, Gas and Chemicals Terminals design (Operational Experience is a plus).
Knowledgeable in different standards and recommended design practices typically applied in the Oil Gas and Chemical Industries (i.e. API, NFPA, IE, ISGOTT, etc.)
At least 15 years of project engineering experience especially Front End Design.
Experience with execution of engineering activities in projects and interfaces between different disciplines.
Storage tanks (atmospheric, pressurized, refrigerated, cryogenic, etc)
Marine facilities (dock structures, topside equipment, etc)
Mechanical rotary equipment (pumps, compressors)
Basic process equipment (chillers, heaters, coils, etc)
Vapor Control Units (flares, thermal oxidizers, scrubbers, etc)
Truck and Rail (un)loading infrastructure
Familiar with activities required for the application for permits and related regulatory requirements.
Familiar with process hazard assessments (i.e. What If, HazOp, LOPA, etc).
Familiar with maintenance requirements in marine terminals (i.e. inspections per API 653, API 571, etc.)
Familiar with automation infrastructure (i.e. DCS, SIS, field instrumentation, etc)
Familiar with New Energies projects like hydrogen, hydrogen carriers, energy storage, CCS, etc.
Strong skills with software and computer tools.
Knowledge and understanding of the different contracting strategies: EPC, EPCM, E+P+C, etc.
Experience managing multi-discipline engineering projects where complex interface management are required
Knowledge and experience on the complete stage gate process (VPM) cycle.
Support the development of detailed engineering design, including specifications, standards, specification of equipment and materials, operating parameters, automation, utilities.
Ensure engineering development of projects adheres with Vopak Standards and recognized industry practices.
Experience & knowledge in (1) development of project cost estimates per the international standards
(2) development and update of project schedule (P6 knowledge is a plus)
(3) implementation of WBS & CBS
(4) application of Cost Control principles
(5) physical progress measurement
(6) forecasting methods
(7) risk management.
Review and validate project's cost estimates achieve Estimate class per ICEAA.
Review and ensure Schedules are developed properly with the right level of task details and sequencing at each stage of the project from FEL to Execution.
Ensure CBS and WBS are used consistently across all projects, cost estimates, schedules, progress measurement and scope documents.
Ensure implementation of scope changes monitoring, and follow the approval process for Scope change and variations.
Implement effective document management for all aspects of the project to assure traceability, project records and smooth documentation turnover.
Review and validate physical progress measurement is adequate to monitor project progress.
Review and monitor project cost and that cost control principles are applied on the project.
Ensure Weekly/Monthly reporting is prepared according to Vopak principles of transparency and integrity and issued on time to all stakeholders.
Review, validate and update with project teams the project risk register and ensure risks are being properly mitigated by risk owners.
Review and validate project forecasts of Time (In-service date) and Cost (EAC).
The employee may be required to climb ladders/storage tanks up to 50' in height.
The employee may occasionally lift and/or move up to fifty (50) pounds.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception and ability to adjust focus.
Employees may be required to travel by air, rail, bus, or car.
Applicants must be eligible to work in the United States.
Experience & knowledge in (1) development of project cost estimates per the international standards', (2) development and update of project schedule (P6 knowledge is a plus), (3) implementation of WBS & CBS', (4) application of Cost Control principles', (5) physical progress measurement', (6) forecasting methods', (7) risk management.
Familiar with activities required for permits and related regulatory requirements.

SmartExplore AI is experimental.

New, Posted 18 hours ago

Apply Directly

Field Service Engineer - Automation

Powell Industries

Houston, TX 77246

Requires TravelFlexible Schedule

Bachelor's degree in electrical engineering
5+ years as an electrical field service engineer in Automation
Knowledge in common industrial communication protocols such as Modbus TCP/IP, IEC61850, and DNP 3.0.
Knowledge in SCADA systems using WonderWare InTouch, Allen Bradley Factory Talk, Copa-Data Zenon, Siemens WinCC, and/or SEL RTAC HMI
Knowledge of configuration files using various manufactures such as SEL, GE, Siemens and Beckwith.
Exhibit working knowledge of advanced electrical industry manufacturing standards & electrical systems, working knowledge of both factory testing standards and NETA MTS & ATS standards.
Specific standards include sections of ANSI IEEE C37 applicable to the design and manufacture of breakers and switchgear.
Specific knowledge of the following: ANSI IEEE device function numbers; ampacities of electrical conductors in switchgear applications; electrical air and surface creepage clearance requirements.
Demonstrate knowledge of basic electrical theory and control circuits i.e.: Ohm's Law; Advanced AC and DC theory; contactor and circuit breaker schematics.
Demonstrate knowledge of basic distribution protective relay testing, hi-pot testing, and breaker function testing. i.e.: testing of over-current and motor protection relays with current injection.
Skilled in the art of writing accurate and complete test reports, project summaries and has the ability to explain most of the system anomalies found on a given project.
The Field Service Automation Engineer will also be expected to demonstrate proficiency with computer skills using Oracle, MS Outlook, Power DB, Word & Excel.
Working knowledge with using the following test equipment: Multi-meter and relay test set.
Must demonstrate working knowledge with the use of various hand tools and mechanical adaptability.
Must have accelerated verbal and written communication skills.
Proficiency in problem solving.
Willing to attend in-house and out-side training.
Willing to travel up to 70% of the year.
Demonstrate ability to read and interpret plan sets and one-line diagrams.
Communicate to customers about project execution plans.