Home My Resume Saved Jobs Matches Feedback

4618 Ecg Technician jobs in Richmond,TX

New, Posted 1 day ago

Apply Directly

IT Technician-Campus Technology

International Leadership of Texas

Houston, TX 77246

Apply Directly

Product Manager

Standex Electronics

Sugar Land, TX 77479

New, Posted 20 hours ago

Apply Directly

Lead - Assembly

Igloo Products

Katy, TX 77494

~ 17 min OnsiteHealth InsurancePaid Time Off

Education: High School Diploma or Equivalency.
Minimum of six (6) months in supervisory/leadership role.
Language skills: Must be able to read, write, speak and comprehend English.
Math skills: Able to add, subtract, divide and multiply.
Able to lift a maximum of 50 lbs. multiple times a day during a 12-hour shift.
Able to push up to 80 lbs. on rollers or wheels.
Bend and stand in difficult positions up to 12 hours.
Minimum height requirement of 60 inches.
Work environment: Hot & humid in summer months, cold during winter.
Roles may involve extended periods (up to 12 hours) of standing and walking, including moving at a brisk pace and occasional stair climbing.
Frequent bending, stooping, kneeling, and working in low or awkward positions during production or maintenance tasks.
Operator-level roles may involve lifting up to 25 lb repeatedly throughout the shift.
Technician-level roles may involve lifting up to 50 lb multiple times per day, including overhead lifts.
Where possible, mechanical aids (e.g., hoists, forklifts) are used.
Use of both hands is required to operate tools, perform adjustments, and handle assembly materials with precision.
Sufficient visual acuity (e.g., 20/40 with or without correction) is necessary for tasks involving inspection and safe equipment operation.
Work is performed in a production setting where seasonal temperatures may range from 100-120°F (with humidity) in summer to cooler conditions in winter.
High noise levels are common; hearing protection is provided and required.
Personal Protective Equipment (PPE) such as ear protection, safety glasses, steel-toed shoes, gloves, and protective clothing may be required depending on the task.
Line Lead must be certified in all core positions (screw gunning, foaming, cleaning and drain plug installing).
Prior to shift start up or at product change over, Line Lead must verify that DJR (Discrete Job Report) match each component listed and the finish product as whole.
The FPI is required to be verified against the DJR and submitted for approval during the first 15 minutes of the shift.
All applicants must be at least 18 years old and legally authorized to work in the United States on a permanent basis.