Commute Time
Date Posted
Title
Job Type
Benefits
Pay
8984 Electrical Engineer Nuclear jobs in Los Angeles,CA
Apply Directly
Quality Control Inspector III
Motorola Solutions
Los Angeles, CA 90012
$26-$27/hr
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Kneeling or squatting to access lower shelves.
- Minimum 3 years of hands-on inspection experience with electronic components, mechanical assemblies, or similar systems.
- Demonstrates ability to read and interpret complex technical documentation, including schematics, mechanical drawings, BOMs, and routing diagrams.
- Walking/Moving in the labs.
- Advanced proficiency using inspection tools and test equipment (e.g., multi-meters, calipers, micrometers, microscopes, torque drivers).
- Capable of identifying, documenting, and communicating non-conformances and contributing to corrective/preventive actions.
- Strong experience inspecting against IPC standards (J-STD-001, IPC-A-610, IPC-A-620), with working knowledge of defect criteria and process controls.
- Occasional exposure to heat and cold.
- Proficient with Google Workspace and Microsoft Office for reporting, documentation, and communication.
- Must be able to lift up to 50 lbs. when receiving incoming part shipments.
- Must possess strong organizational skills, attention to detail, and the ability to manage multiple priorities in a fast-paced environment.
- Perform bending and reaching movements to place items on lower and higher shelves.
- NOTE - Must be a U.S. Person (U.S. Citizen, or U.S. Permanent Resident) due to clients under U.S. federal contracts.
- High School Diploma or GED.
- Excellent written and verbal communication skills.
- All employment is contingent upon the successful clearance of a background check and drug test.
Apply Directly
SCADA Integration Engineer
CSI Electrical Contractors
Santa Fe Springs, CA 90670
$95,000-$135,000/yr
RemoteHealth InsurancePaid Time OffRetirement Benefit
- Ability to travel up to 40%
- Possess a minimum of a vocational degree in electronics/computer/networks
- Has experience with routers, managed switches, LAN development, WAN development
- Has knowledge of software programs and protocols: IEEE 61850, IEC 61131-3, SEL, ABB & GE platforms, DNP, Modbus, Bocce, etc.
- May be required to sit or stand for long periods of time
- Position may be subject to pre-employment screening, which may include background check and drug testing.
- Possess a minimum of 4 to 7 years of related work experience (Can be a combination of trade & relevant work experience)
- Frequently works outdoors on uneven surfaces
- May be required to stoop, bend, and crouch
- Has experience with integration and debug of programs in a substation or industrial environment
- Proficiency in MS Office Suite of products, Bluebeam, and other web-based software applications
- This an office position that will require field time with the ability to travel and work remotely
Apply Directly
Electrical Engineer
Akkodis
Carson, CA 90749
$40-$45/hr
Health InsurancePaid Time OffRetirement Benefit
Apply Directly
Maintenance Engineer
Golden State Foods
La Puente, CA 91746
~ 30 min Onsite
- Minimum 3-year experience as a maintenance or production supervisor, preferably in a mature TPM / IWS environment.
New, Posted 23 hours ago
Apply Directly
Senior Manufacturing Engineer
Eaton Aerospace
Los Angeles, CA 90012
$99,000-$145,000/yr
OnsiteHealth InsuranceRetirement Benefit
- Minimum 3 years' experience with manufacturing activities of products and components in a manufacturing environment.
- No relocation benefit is offered for this position. Only candidates residing within the immediate geographical area will be considered for this position
- Bachelor's Degree in Engineering from an accredited institution
- Candidates must be legally authorized to work in the United States without company sponsorship.
- This position requires access to export-controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must be a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (green card holder), (iii) refugee under 8 U.S.C. 1157, or (iv) asylee under 8 U.S.C. 1158.
Apply Directly
QA Inspector I
Empower RF Systems
Inglewood, CA 90301
$24-$27/hr
~ 21 min Onsite
- Requires thorough understanding of QA inspection methods, including good analysis skills and technical knowledge.
- Proficiency in the use of inspection hand gauges including micrometers, dial indicators, vernier calipers, height gauges, internal & external thread gauges, ID/OD micrometers, bore gauges, etc.
- Must understand Quality Management Systems (ISO 9001) and advanced shop math.
- Minimum of 5 years Quality Control experience, preferably in a mil-spec aerospace environment.
- J-STD-001 or IPC-A-610 certified trainer/technician or ASQ Certified Quality inspector technician status is a big plus.
- Proficiency with Microsoft Office, including Word, Excel, PowerPoint, and Access is needed.
- Must have working familiarity with AQL sample inspection techniques, Zero acceptance lot sampling.
- Must be detail-oriented with excellent interpersonal communication skills.
- Must have knowledge of GD&T;, blueprint, and specification interpretation.
Apply Directly
Mechanical Controls Engineer, Special Projects
Hadrian
Los Angeles, CA 90012
OnsiteHealth InsuranceRetirement Benefit
- Develop and maintain PLC applications using Beckhoff TwinCAT 3 or Siemens TIA Portal.
- ITAR Requirements: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
- Experience designing and commissioning electrical systems and panels to industrial safety standards.
- Integrate and commission a variety of industrial robots and sensors using industrial protocols such as EtherCAT, PROFINET, OPC-UA, and MQTT.
- Perform onsite commissioning, troubleshooting, and system optimization, including mentoring junior engineers and codifying best practices.
- Demonstrated ability to troubleshoot complex systems using diagnostic tools and lead structured root cause analysis.
- Lead the electrical and controls design for advanced automated manufacturing systems, including CNC, robotic, and tooling cells.
- Strong skills in integrating sensors and performing risk assessments in accordance with safety standards such as ISO 13849 or ANSI B11.
- Expertise in PLC programming (IEC 61131-3) and motion control, especially with TwinCAT 3 or TIA Portal.
- Electrical & Controls Engineer
- Design and debug control panels to industrial standards (NFPA 79, UL 508A).
- Proficiency in robotic systems integration with ABB, Fanuc, Yaskawa, or Kuka platforms.
- Design and create HMI interfaces.
Apply Directly
Electrical Test Engineer
Jobot
Glendale, CA 91201
$80,000-$130,000/yr
Flexible Schedule
Apply Directly
Sr. Manufacturing Engineering Manager
Crane Company
Burbank, CA 91502
~ 21 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Experience: 8+ years previous related experience sufficient to demonstrate thorough competency and knowledge of theory and practical application of the technical discipline applicable to the assigned area
- Mental/Visual: use of computer
- Manufacturing operations may require the use of safety equipment to include but not limited to: eye safety glasses, gowning, masks, hearing protectors, heel/wrist straps and any other required PPE
- Knowledge of continuous improvement tools; Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods
- Skills/Abilities: Strong emphasis on critical thinking, time management, judgment and decision-making; Excellent oral and written communication; Ability to motivate, develop and direct people as they work; Ability to identify the best people for the job
- Standing: up to 100%
- Pushing (in pounds): up to 25 pounds
- Workspace (line, cube, etc): work bench
- Eligibility Requirement: This position may require access to Controlled Data or Information. Where the position requires such access only US Persons will be considered. As a US Department of Defense contractor, we are bound by International Traffic in Arms Regulations (ITAR).
- FAA sensitive positions require employees to participate in a random drug test pool.
- Education/Certification: BS degree in Electrical, Electro-mechanical, Industrial or Mechanical Engineering
- Lifting (in pounds): up to 25 pounds
- May be exposed to unusual environmental conditions such as loud noises, cold temperatures, confined spaces, dust or fumes
- In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check.
- Sitting: up to 100%
New, Posted 16 hours ago
Apply Directly
Staff Engineer Subsystems Mechanical - Electrical Design
Northrop Grumman
Los Angeles, CA 90001
Health InsurancePaid Time Off
What companies are hiring Electrical Engineer Nuclear jobs in Los Angeles,CA?
- Motorola Solutions
- CSI Electrical Contractors
- Akkodis
- Golden State Foods
- Eaton Aerospace
- Empower RF Systems
- Hadrian
- Jobot
- Crane Company
- Northrop Grumman
- Motorola Solutions
- CSI Electrical Contractors
- Akkodis
- Golden State Foods
- Eaton Aerospace
- Empower RF Systems
- Hadrian
- Jobot
- Crane Company
- Northrop Grumman
What is the hourly salary range for Electrical Engineer Nuclear jobs in Los Angeles,CA?
The hourly salary range is $24 - $45.
The hourly salary range is $24 - $45.
