Home My Resume Saved Jobs Matches Feedback

103 Electrician Apprentice jobs in Rosenberg,TX

New, Posted 9 hours ago

Apply Directly

Electrician - Day Shift

nVent

Houston, TX 77002

~ 37 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Electrician - Day Shift
18 months or more of electrical experience required
Vocational/technical degree in electricity or equivalent experience.

SmartExplore AI is experimental.

Apply Directly

Assembler - Hiring Now

NOV

Houston, TX 77064

~ 37 min OnsiteHealth InsurancePaid Time OffRetirement Benefit

Physically capable of standing, walking, bending, stooping, pushing/pulling, and repetitive movements for up to 8 hours per day
Ability to work effectively both independently and in a team environment
Must be able to lift up to 50 pounds
Ability to pass a drug screen, physical exam, & background check
Understanding of quality assurance concepts, typically acquired through in-house training
Ability to solve practical problems and work with limited standardization
Comfortable working in a factory environment with temperature variations
Must be able to read assembly blueprints in English format
Adaptability and willingness to be cross trained
Must be willing and able to work overtime and weekends as required
Working knowledge of shop safety practices
Ability to multitask in a fast-paced manufacturing setting

SmartExplore AI is experimental.

Apply Directly

Assembler - Hiring Now

ASTEC INDUSTRIES

Stafford, TX 77477

~ 21 min Onsite

Ability to read drawings and blueprints accurately.
Able to operate overhead cranes and forklifts.
Knowledge of commonly used mechanical concepts, practices, and procedures required.
Ability to correctly use and read a tape measure, and read/understand job-related blueprints, required.

SmartExplore AI is experimental.

Apply Directly

Mechanical Assembler

ATEC

Stafford, TX 77497

~ 21 min Onsite

Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals
Employee is regularly required to sit, bend, stand, reach, walk, and occasionally lift and/or move up to 25 pounds
Good eyesight; buy lenses if necessary
High School diploma or GED, or one to three years experience and/or training; or combination of education and experience

SmartExplore AI is experimental.

New, Posted 1 day ago

Apply Directly

Assembler - Hiring Now

Oshkosh Corporation

Houston, TX 77002

~ 37 min Onsite

One (1) or more years of relevant experience in Manufacturing or General Labor.
Physical Demands: Frequent Hearing, Talking, Visual, Standing, Walking/Running, Reaching, Driving, Fine Dexterity, Manual Dexterity, Upper Extremity Repetitive Motion; Occasional Climbing, Bending/Kneeling, Lifting/Carrying up to 40lbs., Pushing/Pulling up to 40lbs.; Seldom Typing, Sitting.
High School Diploma or equivalent.

SmartExplore AI is experimental.

Apply Directly

Maintenance Technician - Millwright

Ecolab

Fresno, TX 77545

$35/hr

~ 30 min OnsiteChildcare AssistanceEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Must be able to work possible overtime including callouts, weekends, holidays, etc. Normal work schedule - 4/10's Monday - Thursday.
1 years of experience with electronic and PLC based applications in an industrial environment.
2 years Millwright experience in industrial maintenance environment (chemicals/plant)
1 years of experience with electrical and mechanical systems in an industrial environment
Must be able to lift/carry 50 pounds
Must be able to read, understand and use IOMs or blueprints to tear down / rebuild equipment.
Ableness to walk on an elevated catwalks over 15 feet high and working confined spaces to perform daily duties.
High School diploma or equivalent
2 years of experience in an industrial maintenance environment
1 years of experience with tools, procedures and methods utilized in an industrial maintenance environment.

SmartExplore AI is experimental.

Apply Directly

Maintenance Technician

Pennsylvania Machine Works, LLC

Houston, TX 77020

New, Posted 11 hours ago

Apply Directly

Maintenance Mechanic - Hiring Now

ELLWOOD Groups

Houston, TX 77045

~ 37 min Onsite

Allen Bradley PLC (SLC 500, Control Logix and RSView) Knowledge
Fit bearings, align gears and shafts, attach motors, and connect couplings and belts to precise tolerances.
Ability to write routine reports and correspondence.
Repair or replace defective parts
Must have strong background in mechanical, electrical, hydraulic, pneumatics, CNC and overall machine troubleshooting skills.
High School diploma or GED.
Qualified candidates must have experience maintaining and troubleshooting heavy forging presses, manipulators, furnace combustion components, hydraulic and pneumatic systems and components like pumps, compressor, directional, servo and proportional valves, heat exchangers, filters and cooling tower equipment.
Ability to read Mechanical equipment drawings, hydraulic, electrical and pneumatic schematic.
Ability to plan and install conduit.
Education and/or Experience with an extensive background in electrical power distribution, forge equipment electrical and control troubleshooting and Forging Facility maintenance.
Understanding of Safe working
Familiarity with government regulations for industry and safe work practices dealing with machine repair.
Ability to read service manuals to determine safe work procedures
Knowledge of and experience with Microsoft Office.
Must have 5 years of experience as Maintenance Mechanic
May do some minimum welding (a weld that is adequate in size to temporarily hold components in place until it can be completely welded by a registered apprentice welder or a journeyman welder) and fabrication.
Basic electrical knowledge for safe working with various industrial equipment is a must.
Service and repair hydraulic and pneumatic systems
Align and test equipment and make any necessary adjustments.
Perform predictive and operational procedures
Ability to use CMMS/E-Maint System.
Foresee and identify Critical spare needs and works with maintenance planner to ensure availability of parts in time.

SmartExplore AI is experimental.

Apply Directly

Assembly Line Lead (Day Shift)

Igloo Products

Katy, TX 77494

~ 33 min OnsiteHealth InsurancePaid Time Off

These roles can be physically demanding, involving repetitive motions and long hours.
Math skills: Able to add, subtract, divide and multiply.
Use of both hands is required to operate tools, perform adjustments, and handle assembly materials with precision.
Able to assist in training new operators and fill any line position as needed.
Work is performed in a production setting where seasonal temperatures may range from 100-120°F (with humidity) in summer to cooler conditions in winter.
All applicants must be at least 18 years old and legally authorized to work in the United States on a permanent basis.
Sufficient visual acuity (e.g., 20/40 with or without correction) is necessary for tasks involving inspection and safe equipment operation.
Where possible, mechanical aids (e.g., hoists, forklifts) are used.
Operator-level roles may involve lifting up to 25 lb repeatedly throughout the shift.
Able to foam all models, of any size.
Roles may involve extended periods (up to 12 hours) of standing and walking, including moving at a brisk pace and occasional stair climbing.
Work environment: Hot & humid in summer months, cold during winter.
Able to operate all styles of screw guns.
Able to lift a maximum of 50 lbs. multiple times a day during a 12-hour shift; Able to push up to 80 lbs. on rollers or wheels.
Technicians may be required to handle heavy molds and materials; use of material handling equipment is provided and encouraged.
Supervisory skills: Minimum of six (6) months in supervisory/leadership role.
Personal Protective Equipment (PPE) such as ear protection, safety glasses, steel-toed shoes, gloves, and protective clothing may be required depending on the task.
Language skills: Must be able to read, write, speak and comprehend English.
Bend and stand in difficult positions up to 12 hours.
Frequent bending, stooping, kneeling, and working in low or awkward positions during production or maintenance tasks.
Minimum height requirement of 60 inches.
High noise levels are common; hearing protection is provided and required.
Education: High School Diploma or Equivalency.
Technician-level roles may involve lifting up to 50 lb multiple times per day, including overhead lifts.

SmartExplore AI is experimental.

Apply Directly

Manufacturing Technician - Hiring Now

Eaton Aerospace

Houston, TX 77002

$20.50/hr

~ 37 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Minimum six months of experience in an assembly related role with the use of hand and/or power tools
Eaton will not consider applicants for employment immigration sponsorship or support for this position
No relocation benefit is being offered for this position. Only candidates that currently reside within 50 miles of the work location will be considered
Active-Duty Military Service member candidates are exempt from the geographical area limitation
Must have a high school diploma or GED from an accredited institution
This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.

SmartExplore AI is experimental.