Home My Resume Saved Jobs Matches Feedback

365 Failure Analysis Engineer jobs in Pittsburgh,PA

Apply Directly

Supplier Manufacturing Engineer

Curtiss-Wright

Cheswick, PA 15024

$76,200-$127,000/yr

Requires TravelFlexible SchedulePaid Time OffRetirement Benefit

Must be able to obtain and maintain DOD security clearance.
A minimum of five (5) years in a manufacturing environment with primary experience in one or more of the following: machining, fabrication welding, testing, winding and/or assembly processes,
Due to DoD requirements, candidates must be US citizens,
Bachelor's degree in an Engineering discipline and/or equivalent experience in a Manufacturing Lead role,
Travel (50% local, domestic or international as required)

SmartExplore AI is experimental.

Apply Directly

Manufacturing Engineer

Becton, Dickinson and Company

Zelienople, PA 16063

~ 34 min Onsite

Responsible for creation/update of PFMEA/Risk analysis.
Experience working closely with design engineering, quality engineering and production personnel.
Position requires good logic and reasoning ability. Ability to define problems and find logical solutions.
Familiarity with FDA regulatory requirements, GMP, ISO, lean, process validation and six sigma methodologies.
Ability to comply with applicable quality regulations as identified by the organization.
Ability to read and understand mechanical drawings and electrical schematics.
Must evaluate and resolve daily issues by exercising sound judgement.
Lead the validation/qualification effort for equipment and processes (IQ, OQ & PQ).
Maintain working knowledge of company policies and procedures, ISO and FDA requirements.
Travel in and outside of the US may be required to support complex project planning and collaboration.
Experience with troubleshooting electromechanical systems.
Bachelor's degree in an engineering discipline.
Responsible for designing and developing processes to optimize process flow, reduce variability, improve operating capabilities, and ensure operator safety.
Identify need for validation of manufacturing equipment/process and support systems to meet product requirements, regulations, quality and company policies.

SmartExplore AI is experimental.

Apply Directly

Manufacturing Engineer

Elliott Group

Jeannette, PA 15644

~ 37 min Onsite

Technical skills must include in-depth knowledge of Manufacturing Processes, State-of-the-art Machining, Assembly, Manufacturing Techniques and Tool Design.
Job experience must include at least 10 years in a manufacturing and assembly environment with progressive responsibilities.
Educational requirements include a Bachelor's Degree in Manufacturing Engineering, Manufacturing Technology, CNC Machining Automation, related field, or equivalent experience.
Additional skills required would include a working knowledge of CAD, CAM, and related systems, non-traditional machining processes, welding, balancing, and inspection techniques.
Training in Problem Solving and Decision Analysis is essential.

SmartExplore AI is experimental.

New, Posted 20 hours ago

Easy Apply

Customer Service Rep Work From Home

Hire Standard Staffing

Pittsburgh, PA

$120,000/yr

RemoteHealth Insurance

Must be a U.S. or Canadian citizen.

SmartExplore AI is experimental.

Apply Directly

Welding Engineer

Bechtel Plant Machinery

Monroeville, PA 15146

~ 22 min Onsite

Bachelor's degree in Welding Engineering, Materials Science, or Metallurgical Engineering from an accredited college or university.
All employees are subject to being randomly selected for drug testing without advance notification.
U.S. citizenship is a requirement for security clearance applicants.
A minimum GPA of 3.0 for newer college graduates.
BPMI is a drug-free workplace. Candidates accepting a job offer will be required to pass a pre-placement drug screening and background investigation.
Requires a security clearance; however, all qualified candidates will be considered regardless of their current clearance status. The ability to obtain and maintain a Department of Energy security clearance is required.

SmartExplore AI is experimental.

Apply Directly

Material Testing and Certification Specialist (Quality Assurance)

DYNAMIC FLOWFORM

Washington, PA 15301

~ 41 min Onsite

Experience in manufacturing operations or working in a shopfloor environment
Computer experience and working knowledge with Microsoft Office Software - Outlook, Word, Excel, and job/company related systems

SmartExplore AI is experimental.

Apply Directly

Quality Control Technician

Ecolab

Pittsburgh, PA 15220

$30/hr

OnsiteEducation AssistanceHealth InsuranceRetirement Benefit

3 years of experience in an equipment assembly or electrical-related assignment
Experience using handheld electrical process calibration tools, such as multi-meter, signal generator, and amprobe
Be fully vaccinated for COVID-19, including a booster if eligible, unless a religious or medical accommodation is requested by the applicant and approved by Ecolab.
Experience wiring simple circuitry and performing point-to-point terminations
Experience using hand and power tools and basic size and weight measuring devices
3 years of experience working on industrial equipment utilizing computerized (PLC) control systems to perform process operations
Undergo additional background screens and/or drug/alcohol testing for customer credentialing.
Experience with low voltage AC (<600VAC) and DC (<50VDC) circuit assembly
This position requires regularly lifting and carrying 50lbs.
High School diploma or equivalent
Experience reading and interpreting mechanical and electrical drawings

SmartExplore AI is experimental.

Apply Directly

Vice President, Target Process Application Engineer

BNY

Pittsburgh, PA 15289

Health Insurance

New, Posted 1 day ago

Apply Directly

Quality Assurance Metrology Technician

Coherent

Saxonburg, PA 16056

~ 44 min Onsite

Must have familiarity with quality management systems and standards (e.g., ISO 9001).
Due to ITAR compliance, this position requires a U.S. citizen, permanent resident alien, or protected individual per 8 U.S.C. 1324b(a)(3).
Ability to model and apply I CARE values (Integrity, Collaboration, Accountability, Respect, Enthusiasm).
High school graduate or equivalent required.
Must have a solid understanding of metrology principles and quality assurance processes.
Must have excellent communication and interpersonal skills, with the ability to work collaboratively in a team environment.
Must be able to read and interpret customer supplied optical drawings in accordance with military specifications and ANSI standards.
Must be able to sit or stand for extended periods of time.
Must have strong math, problem-solving, and analytical skills along with great attention to detail.
The use of both hands while transporting materials is required.
Must be proficient in the use of measurement tools (e.g., calipers, micrometers, CMMs) and metrology software.
Must have the ability to perceive objects outside of direct line of sight. (peripheral vision)
Must have strong Microsoft Office Suite (Word, Excel, PowerPoint) skills.
Associate or technical degree in engineering, metrology, or a related field required.
At least two (2) years of work experience in QAM or a related optical/mechanical test environment with a heavy emphasis on mechanical testing, precision measurement, calibration, and data analysis
Must have good manual dexterity and ability to work with small, delicate components.
Must have capability to see clearly at a distance, especially when observing larger equipment or layout plans.
Ability to use computer equipment is required.
Must have a strong technical background to understand technical concepts and drawings.
Must have capability to judge distances accurately, which is crucial for measuring and calibrating equipment.
Must be able to lift, push, and/or pull up to 50lbs.
At least two (2) years of experience in metrology or quality assurance.

SmartExplore AI is experimental.

Apply Directly

Quality Control/Level II NDE (VT, PT, MT)

Holtec International

East Pittsburgh, PA 15112

~ 16 min Onsite

Must be qualified and certified to ASNT-TC-1A in two or more of the following NDT Methods that will be utilized: Visual Examination (VT) Liquid Penetrant (PT) Magnetic Particle (MT) Radiographic (RT) Ultrasonic Testing (UT)
The associate is regularly required to talk and hear, and stand for long periods of time.
This role can be physically demanding and may require the ability to lift up to fifty (50) pounds.
Must be qualified and certified to ASNT-TC-1A in two or more of the following NDT Methods that will be utilized:\n Visual Examination (VT)\n Liquid Penetrant (PT)\n Magnetic Particle (MT)\n Radiographic (RT)\n Ultrasonic Testing (UT)
Previous Level II Certification to ASNT-TC-1A including documented objective evidence of classroom and on the job training experience.
The associate is frequently required to stand, walk, climb, balance, stoop, kneel, crouch, reach, push, pull, lift, grasp, feel, and use repetitive motion.
Valid Driver's License
Capable of determining the calibration status of inspection and measuring equipment is in proper condition for use, and that inspection, examination and test procedures are approved.
Required: High School diploma or equivalent with at least 3 years of inspection related experience.
Familiar with the tools and equipment and shall have demonstrated proficiency in their use.
Job requires potential overnight travel and will require off shift work.

SmartExplore AI is experimental.