These roles can be physically demanding, involving repetitive motions and long hours.
Math skills: Able to add, subtract, divide and multiply.
Use of both hands is required to operate tools, perform adjustments, and handle assembly materials with precision.
Able to assist in training new operators and fill any line position as needed.
Work is performed in a production setting where seasonal temperatures may range from 100-120°F (with humidity) in summer to cooler conditions in winter.
All applicants must be at least 18 years old and legally authorized to work in the United States on a permanent basis.
Sufficient visual acuity (e.g., 20/40 with or without correction) is necessary for tasks involving inspection and safe equipment operation.
Where possible, mechanical aids (e.g., hoists, forklifts) are used.
Operator-level roles may involve lifting up to 25 lb repeatedly throughout the shift.
Able to foam all models, of any size.
Roles may involve extended periods (up to 12 hours) of standing and walking, including moving at a brisk pace and occasional stair climbing.
Able to push up to 80 lbs. on rollers or wheels.
Work environment: Hot & humid in summer months, cold during winter.
Able to operate all styles of screw guns.
Technicians may be required to handle heavy molds and materials; use of material handling equipment is provided and encouraged.
Supervisory skills: Minimum of six (6) months in supervisory/leadership role.
Language skills: Must be able to read, write, speak and comprehend English.
Personal Protective Equipment (PPE) such as ear protection, safety glasses, steel-toed shoes, gloves, and protective clothing may be required depending on the task.
Bend and stand in difficult positions up to 12 hours.
Able to lift a maximum of 50 lbs. multiple times a day during a 12-hour shift.
Frequent bending, stooping, kneeling, and working in low or awkward positions during production or maintenance tasks.
Minimum height requirement of 60 inches.
Education: High School Diploma or Equivalency.
High noise levels are common; hearing protection is provided and required.
Technician-level roles may involve lifting up to 50 lb multiple times per day, including overhead lifts.

SmartExplore AI is experimental.

New, Posted 3 hours ago

Apply Directly

Guest Experience&Customer Service Team Member

Best Crowd Management

Houston, TX 77246

$14/hr

Flexible Schedule

New, Posted 1 day ago

Apply Directly

In Home Sales Rep

ARS-Rescue Rooter

Pearland, TX 77584

$100,000-$200,000/yr

Health InsurancePaid Time OffRetirement Benefit

Apply Directly

Assembler - Manufacturing

Oshkosh Corporation

Houston, TX 77002

~ 25 min Onsite

Talking
Occasional Climbing
Sitting
One (1) or more years of relevant experience in Manufacturing or General Labor.
Driving
Seldom Typing
Upper Extremity Repetitive Motion
Certain positions with Oshkosh Corporation require access to controlled goods and technologies subject to the International Traffic in Arms Regulations or the Export Administration Regulations.
Walking/Running
Reaching
Applicants for these positions may need to be "U.S. Persons," as defined in these regulations.
Frequent Hearing
Pushing/Pulling up to 40lbs.
Lifting/Carrying up to 40lbs.
Fine Dexterity
Bending/Kneeling
Standing
Manual Dexterity
High School Diploma or equivalent.
Visual

SmartExplore AI is experimental.

Apply Directly

Assembler - Manufacturing

ATEC

Stafford, TX 77497

Onsite

Employee is regularly required to sit, bend, stand, reach, walk, and occasionally lift and/or move up to 25 pounds.
Good eyesight; buy lenses if necessary.
Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals.
High School diploma or GED, or one to three years experience and/or training; or combination of education and experience.

SmartExplore AI is experimental.

Apply Directly