Commute Time
Date Posted
Title
Job Type
Benefits
Pay
178 Miningextraction jobs in Buffalo,NY
New, Posted 1 day ago
Apply Directly
Assembler - Hiring Now
Ingersoll Rand
Buffalo, NY 14227
$28-$32/hr
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- MIG & TIG welding.
- Occasional exposure to high noise, levels where hearing protection will be required.
- Occasionally required to lift up to 50 pounds.
- Familiar with and ability to utilize all hand tools including wrenches, sockets, hammers, tape measures, crimpers, cutters, and steel banding.
- Frequent exposure to various chemicals, sealants, and lubricants.
- Must be able to lift up to 25 pounds from floor to waist.
- Occasionally required to work outside where weather conditions range from moderate cold to moderate heat.
- Occasionally required to work near moving mechanical equipment.
- Knowledgeable of and able to utilize computer systems.
- High School Diploma or General Equivalent Diploma (GED) is required.
- 3 years experience welding to exact ASME specifications.
- Reaching and handling with high levels of dexterity.
- Frequently required to sit, stand, and walk for extended periods.
- Normal exposure to moderate noise levels.
- Must know proper purging techniques for stainless steels.
New, Posted 2 hours ago
Apply Directly
Welder - Hiring Now
Moog
Niagara Falls, NY 14301
$30-$36/hr
~ 29 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Operate orbital welding and other welding equipment including extensive setup and prep equipment (operate tube trimming equipment, maintains cleanliness standards)
- Operation of Tungsten, Inert Gas Welding equipment (T.I.G.), both in a manual and semi-automatic state
- Create a weld sample, prepare it for inspection and inspect the results under a microscope to verify requirements
- The parts and fixtures are also inspected under a microscope for weld requirements and workmanship quality
- Use Operator "techniques" are critical in considering alignment, distance, slope control, power settings, geometry of weld and proximity to edge
- Demonstrated ability to understand and apply all verbal, written and computer work instructions or training in English
- At least 3 years of relevant experience
- Parts may require dimensional inspection, utilizing but not limited to a drop gage and indicator
- May be exposed to mechanical, electrical, or chemical processes requiring use of protective eyewear and PPE
- High School diploma or GED preferred
- Follow and advise on written setup procedures
- Assemble weld process related hardware and fixture installation
- This position requires full physical, which includes bloodwork, Pulmonary Function testing, and fit test
- Set-ups are exacting and frequently complicated involving precise part(s) utilizing various height gauges, plates, measuring instruments, and fixturing
- Demonstrated ability to perform simple addition, subtraction, multiplication and division
- Determine operating requirements for voltage, temperature, position, time, capacities, etc. when precise instructions are not available
- Within the framework of a team-based organization, perform various precision assembly, test and process-based operations on complex components, assemblies and systems supporting new production and repair
New, Posted 7 hours ago
Apply Directly
Assembler - Hiring Now
Safran
Lancaster, NY 14086
$22.27/hr
~ 20 min Onsite
- Must be capable of using hand tools, measuring devices and other tools needed to perform job functions
- Must be willing to learn new things and support team activities and other team members.
- High School Diploma/GED Equivalent
- ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency
- Ability to perform assembly work in a high volume environment
- Must be willing to help/train other team members.
- Must have at least 1 year of "hands-on" manufacturing experience.
- *Relocation is not provided for this position.
- *All applicants must be a US citizen or US Permanent Resident (i.e., Green Card Holder)
- Must be willing to communicate successfully with team members and other employees as needed.
- Must be able to lift 50 pounds.
- Will be required to participate in problem solving and continuous improvement activities.
- Minimum experience level required More than 3 years
- *Candidates must be legally authorized to work in the United States without company sponsorship.
- Ability to read, write, follow instructions, and perform basic math.
- Minimum education level achieved
New, Posted 11 hours ago
Apply Directly
Dock Loader
Genuine Parts
Buffalo, NY 14221
OnsiteUrgently HiringEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Regular, reliable, predictable attendance
- Able to push/pull up to 300 lbs. using mechanical aids, such as hand trucks, barrel dollies, hydraulic lifts, etc.
- Able to bend or stoop to floor-level shelves and be able to reach shelves (eight feet) with use of stool or ladder when necessary
- Capable of lifting and moving merchandise of up to 60 lbs.
- Should have basic computer APGJCe skills
- Must be able to get in and out of the back of truck with parts while using a ramp when necessary
- Capable of recognizing and distinguishing letters and numbers (both visually and aurally) and remembering their sequence
- Able to speak clearly and listen attentively
- High School Diploma or 6 months of equivalent work experience required
- Able to stand and walk for entire work shift
New, Posted 1 day ago
Apply Directly
General Laborer – Weekly Pay
TruGreen
Orchard Park, NY 14127
$850-$1,200/wk
~ 22 min OnsiteHealth InsuranceRetirement Benefit
- Work in varying weather and outdoor conditions
- You MUST BE physically located in the United States while performing this job
- Lift up to 50 lbs and operate equipment
- Valid driver's license and clean driving record
- Ability to speak, read and write fluently in English is required
- Interact with customers and apply treatments using proper PPE
- Basic math skills for property measurements and product calculations
- Move safely on uneven terrain and stairs
- Must be able to obtain a DOT medical card
- High school diploma or GED
- Ability to read work instructions and complete documentation clearly and accurately
Apply Directly
Manufacturing Technician - Hiring Now
Eaton Aerospace
Orchard Park, NY 14127
$24.09/hr
~ 22 min OnsiteHealth InsuranceRetirement Benefit
- High School Diploma or Equivalency
- US Citizen or Permanent Resident
- Must live within 50 miles
- Minimum of 2 years Aerospace manufacturing OR military experience OR 3 years of relevant manufacturing experience
New, Posted 1 day ago
Apply Directly
Assembler - Hiring Now
Hutchinson
Buffalo, NY 14206
Onsite
- A large degree of lifting (moderate to heavyweight), bending, squatting and maneuvering.
- Hearing protection conforming to OSHA General Industry Standards 29 CFR 1910
- Steel Toe Safety Shoes conforming to OSHA General Industry Standards 29 CFR 1910
- This is a non-exempt position.
- Additional PPE may be required depending on the department
- Retains all qualifications of Production Operator Job Description.
- Safety Glasses conforming to ANSI Z87.1 or higher
- Specific vision abilities required by this job include close vision, for viewing a computer terminal distance vision, peripheral vision, depth perception vision for moving objects and ability to adjust focus.
- The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully.
- The employee is occasionally required to climb or balance and stoop.
- The ability to work with chemicals in the proper environment and while wearing PPE.
- The ability to wear a dust mask conforming to OSHA General Industry Standards 39 CFR 1910.134
- This position is not substantially exposed to adverse environmental conditions.
- The employee frequently is required to stand; walk, talk and hear.
New, Posted 1 day ago
Apply Directly
Production Technician
Praxair, Inc - a Linde Company
Niagara Falls, NY 14301
~ 29 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- High School Diploma or GED equivalent.
- 2 + years Production Operations experience
- Associates Degree with previous internship in Plant Operations
New, Posted 1 day ago
Apply Directly
Assembly Technician
Schneider Electric
Buffalo, NY 14202
$22-$31/hr
Onsite
- Demonstrated ability to follow detailed procedures and maintain quality standards
- Strong technical aptitude and understanding of manufacturing processes
- Vocational or technical education in related field
New, Posted 1 day ago
Apply Directly
Assembler - Hiring Now
Parker Hannifin
Lancaster, NY 14086
$19.33-$29.97/hr
~ 20 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- High School Diploma or GED.
- U.S. Citizenship, Permanent Residency or other appropriate status is required for certain positions, in accord with U.S. import & export regulations.
- Therefore, all applicants seeking employment with Parker will be subject to drug testing as a condition of employment.
What companies are hiring Miningextraction jobs in Buffalo,NY?
- Ingersoll Rand
- Moog
- Safran
- Genuine Parts
- TruGreen
- Eaton Aerospace
- Hutchinson
- Praxair, Inc - a Linde Company
- Schneider Electric
- Parker Hannifin
- Ingersoll Rand
- Moog
- Safran
- Genuine Parts
- TruGreen
- Eaton Aerospace
- Hutchinson
- Praxair, Inc - a Linde Company
- Schneider Electric
- Parker Hannifin
What is the hourly salary range for Miningextraction jobs in Buffalo,NY?
The hourly salary range is $19.33 - $36.
The hourly salary range is $19.33 - $36.
