Commute Time
Date Posted
Title
Job Type
Benefits
Pay
512 Ml Systems Engineer Infrastructure Cloud jobs in Los Angeles,CA
Apply Directly
Associate Manufacturing Engineer
Boeing
El Segundo, CA 90245
~ 23 min OnsiteHealth InsuranceRetirement Benefit
- This position is for 1st shift
- 2+ years of hands-on manufacturing engineering experience with mechanical assemblies
- Relocation: Relocation assistance is not a negotiable benefit for this position.
- Visa Sponsorship: Employer will not sponsor applicants for employment visa status.
- Proficient with CAD/ECAD basics (CREO, SolidWorks, or similar), manufacturing data systems (MES/PLM), and Microsoft Office tools
- Demonstrate problem-solving skills using root-cause analysis tools (5-Why, Fishbone, FMEA, etc)
- Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
- Security Clearance: This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim U.S. Secret Clearance Pre-Start and final U.S. Secret Clearance Post-Start is required.
- Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
- Experience with process documentation, DWG/PDF work instructions, process flow development, and production support
- Education: Bachelor's Degree or Equivalent Required
Apply Directly
Principal Ride Controls Software Engineer, Design Assurance
Disney
Glendale, CA 91201
$188,400-$252,600/yr
~ 17 min OnsiteHealth Insurance
- Experience with requirements development, test plans/procedures, and test execution
- Proficient in fail-safe and safety-related control system design
- At least 15 years of experience with ride control software design, engineering, installation, and commissioning
- Bachelor of Science Degree in an engineering field from an accredited university required.
- Proficient in automated control software design applying functional safety concepts and standards
- Demonstrated practice in functional safety standards, including IEC 61508, IEC 62061, ISO 13849
- Familiarity with amusement and automation industry standards, including ASTM F2291
- Ability to handle multiple complex efforts simultaneously, exert influence, and manage tasks and priorities
- Solid understanding of communication protocols: TCP/IP, CAN, serial, ProfiNET, Ethernet/IP, EtherCAT
- Solid skills in technical document writing and communication
- Ability to travel domestically and internationally for 1-week to 3-month durations
- Extensive knowledge of ride control software architectures
Apply Directly
Sr. Associate, Manufacturing Engineer
L3 Harris
Los Angeles, CA 90079
OnsiteBilingual PreferredEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Read and interpret information from planning documents, drawings, tool orders, blueprints, sketches, specifications, engineering orders and quality assurance manuals to determine the methods and sequence of operations necessary to completely fabricate and machine all types and sizes of rocket engine components.
- Graduate Degree or equivalent with 0 to 2 years of prior related manufacturing experience.
- Accurately report problems, solutions, and results, in concise written and oral communications.
- In lieu of a degree, minimum of 6 years of prior related manufacturing experience.
- Knowledge of basic shop mathematic principles to solve problems.
- Working knowledge of engineering drawings, GD&T;, blueprints, production plans and/or work instructions.
- Bachelor's Degree and a minimum of 2 years of prior related manufacturing experience.
- Please be aware many of our positions require the ability to obtain a security clearance.
- Knowledge of machine tools and equipment, machine shop procedures and practices, principals and properties.
Apply Directly
Manufacturing Engineer 3
Integrated Polymer Solutions
Long Beach, CA 90808
~ 29 min OnsiteHealth InsuranceRetirement Benefit
- Proficient in applying Lean Manufacturing, Six Sigma or other continuous improvement practices
- Demonstrated expertise with complex manufacturing engineering solutions
- Bachelor's degree in engineering required
- CAD experience to design fixtures and jigs
- Knowledge of rubber manufacturing principles, materials and processes such as compression/transfer molding, extrusion, injection molding, and tool design
- Proficient in Microsoft Office and Microsoft GP MRP software
- This position requires compliance with International Traffic in Arms Regulations (ITAR); applicants must be U.S. persons as defined by ITAR
- 5+ years of relevant experience required
- This position requires access to information subject to the International Traffic in Arms Regulations (ITAR); Employment is contingent upon the applicant being a U.S. person as defined by ITAR (22 CFR §120.15), which includes U.S. citizens, lawful permanent residents, refugees, or asylees, as required by U.S. export control laws
Apply Directly
Manufacturing Engineer III
Ducommun
Carson, CA 90749
~ 20 min Onsite
- Professional knowledge of manufacturing and assembly processes together with work measurement and work standards.
- Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
- Working knowledge at an intermediate level of computer skills in e-mail, Word, Excel, PowerPoint, and Visio.
- Ability to work independently, with a higher level of judgement making skills.
- Ability to define problems, collect data, establish facts, and draw valid conclusions.
- 5-7 years experience in a production environment, preferably with electromechanical, aerospace, and industrial applications.
- Ability to read and interpret engineering drawings.
- CAD/CAM software experience (Solidworks, Mastercam, etc.).
- Experience leading cross functional teams on projects.
- Working understanding of 6-Sigma and Lean Manufacturing concepts.
- Excellent verbal and written communication skills.
- Bachelor of Science degree in Mechanical, Industrial, or Manufacturing Engineering or Related Engineering Field.
- Ability to effectively present information and respond to questions from managers, clients and customers.
New, Posted 1 hour ago
Apply Directly
Senior Service Controls Technician - Brea, CA
Trane Technologies
Brea, CA 92821
$50-$65/hr
~ 38 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Must be able to reach your hands over your head
- This role may be exposed to variable weather conditions, moving mechanical parts, heights, risk of electrical shock, noisy operating equipment and other variable environmental conditions based on location
- Must be able to comfortably and routinely access rooftops with extension and/or fixed ladders at heights of 15' to 20', and occasionally, up to 50 feet +
- Must possess a valid driver's license for a minimum of 12 months, with no major or frequent traffic violations including, but not limited to: DUI, Hit & Run, License Suspension, Reckless / Careless Driving or multiple smaller infractions or preventable collisions in the previous 3 years.
- This position is highly physical and requires regular use of hands, fingers, walking, stooping, kneeling and climbing ladders. It requires employees to regularly lift and or move up to 10 lbs., frequently lift and/or move up to 40 lbs. and occasionally lift and/or move more than 40 lbs.
- Must be able to twist the trunk of your body 90 degrees in each direction
- A High School Diploma or equivalent, or certificate of completion from an accredited technical school is required.
- Must be able to squat and touch the floor with both hands
- Must be able to maneuver confined access areas, as small as 30” vertical x 45” horizontal
- This Senior level role typically requires at least 7 years of experience in HVAC/Controls.
- Operating knowledge of Microsoft office software and working proficiency with handheld computer (i.e. Smartphone, iPad).
- Must be able to wear helmets, safety goggles, fall protection harness and safety boots to safely perform job duties
- Must be able to stand on concrete surfaces for extended periods, routinely up to 4 hours
- This role has been designated by the Company as Safety Sensitive.
- Must be able to safely and legally operate a vehicle using a seat belt
- Must be able to safely use a ladder with a 375 lb. total weight limit, while carrying equipment of 50 lbs. or less
Apply Directly
Gameplay Engineer
Disney Experiences
Glendale, CA 91201
$117,500-$157,500/yr
RemoteHealth Insurance
- Understands which data-structures are appropriate for different situations
- Has a broad understanding of Fortnite and the various items and devices that are currently available for UGC
- Bachelor's degree in Computer Science or equivalent combination of education and experience
- Has proficiency in 3D Vector Math and understands its use in game development
- 4 years of experience developing console/PC/mobile games or other digital interactive entertainment
- UEFN hands-on experience, including the construction of custom devices using Verse
- Possesses a good understanding of computer science, especially as it applies to modern game programming
New, Posted 1 day ago
Apply Directly
Tooling Manufacturing Engineer
Howmet Aerospace
Fullerton, CA 92831
~ 35 min Onsite
- Experience in CAD software, preferably good working level in SolidWorks.
- Reaching above and below, stooping, kneeling, crouching, and bending.
- Knowledge of Lean Manufacturing theories, methodologies, standards, and tools.
- Minimum of 3-5 years of experience in manufacturing and tooling design.
- High standard of documentation and record keeping maintaining organizational engineering and tool design specifications.
- Understanding manufacturing methods including stamping, heading, milling, turning, grinding, honing, die polishing, gauging, heat treating, coatings, etc.
- The employee must occasionally lift / carry / move up to 25 pounds.
- Understanding of product tolerance stack-ups and datum structures in the context of designing tooling and fixtures.
- Understanding materials such as titanium, tool steels, stainless steels and their behavior during forming and machining processes.
- Employees must be legally authorized to work in the United States.
- Verification of employment eligibility will be required at the time of hire.
- Experience working with ERP systems, preferably Syteline, Oracle, or QAD.
- Proficiency with GD&T; requirements and standard inspection methods.
- Experience in design of experimentation, data collection, statistical analysis, and clear/concise presentation of results.
- Experience with Microsoft Office products.
- Visa sponsorship is not available for this position.
- Knowledgeable in blueprint reading and GD&T; requirements and standard inspection methods.
- Need to be able to wear safety steel toe shoes and walk around at shop floor environment as needed.
- Bachelor's degree in engineering from an accredited institution.
- Ability to utilize Lean tools to generate meaningful, quantified improvement in cost reduction, efficiency, inventory, cycle/lead times, quality, reliability, delivery, or safety.
Apply Directly
Electronics Assembler A (1st Shift)
Eaton Aerospace
Los Angeles, CA 90079
$25/hr
OnsiteHealth InsuranceRetirement Benefit
- High School diploma, GED or equivalent from an accredited institution is required.
- No relocation benefit is offered for this position. Only candidates residing within 50 miles of Los Angeles, CA facility will be considered for this position.
- Interpret blueprints, verbal, and/or written instructions
- Mininmum of two (2) years' experience in soldering and assembly manufacturing of electronic assemblies
- Eaton will consider for employment, qualified applicants with criminal histories in a manner consistent with the requirements of the FCIHO.
- Legally authorized to work in the United States without company sponsorship now or in the future.
- Lifting requirements: Ability to lift up to 50lbs (group lifts over 35lbs)
- Per day: Sitting, standing, walking, squatting
- This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR).
- Pulling frequently, reaching frequently
- Lifting/Carrying: Knees, Waist
- Must have the ability to utilize hand tools such as, but not limited to air drivers, crimpers, pliers, wrenches, screwdrivers, arbor press, vises, depth micrometers, measuring tools, calipers, lockwire pliers and soldering tools.
- All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.
Apply Directly
Assembler - Hiring Now
Ametek
Irwindale, CA 91706
Onsite
- Willing to perform repetitive tasks while sitting or standing for extended periods of time.
- Ability to perform work accurately and thoroughly.
- High School Diploma, or GED
- 1-3 years related experience and/or training; or equivalent combination of education, training and/or experience
- Ability to read and interpret documents such as blueprints, Parts Manuals, safety rules, operating and maintenance instructions, and procedure manuals.
- Must read, write and speak English fluently.
What companies are hiring Ml Systems Engineer Infrastructure Cloud jobs in Los Angeles,CA?
- Boeing
- Disney
- L3 Harris
- Integrated Polymer Solutions
- Ducommun
- Trane Technologies
- Disney Experiences
- Howmet Aerospace
- Eaton Aerospace
- Ametek
- Boeing
- Disney
- L3 Harris
- Integrated Polymer Solutions
- Ducommun
- Trane Technologies
- Disney Experiences
- Howmet Aerospace
- Eaton Aerospace
- Ametek
What is the hourly salary range for Ml Systems Engineer Infrastructure Cloud jobs in Los Angeles,CA?
The hourly salary range is $25 - $65.
The hourly salary range is $25 - $65.
