Home My Resume Saved Jobs Matches Feedback

8 Pipefitter jobs in Redmond,WA

Apply Directly

Pipefitter Maintenance

General Dynamics Information Technology

Seattle, WA 98154

Requires TravelHealth InsurancePaid Time OffRetirement Benefit

US Citizenship Required: Yes
Braze qual CUNI and copper/face feed
1 + years of related experience
(1) Requires a High School Diploma, GED, or equivalent combination of education, technical training, or work experience
1-3 years of related pipefitting experience.

SmartExplore AI is experimental.

Apply Directly

Journeyman Pipefitter

Vigor, LLC

Seattle, WA 98154

~ 17 min OnsiteHealth InsurancePaid Time OffRetirement Benefit

Transfers materials on/off bench, pallet, and install on vessel. Requires vertically/horizontally transferring materials weighing up to (75 lbs.) from (4") to (48"), up to (10/hr.), a distance of up to (25 feet) without mechanical assistance.
Accesses pipe systems, works off manlifts, scaffolding. Must tolerate heights up to (100 ft.).
Four-hour fire watch certification must be obtained within 30 days of hire
Performs rigging (as applicable to pipe and valve systems) - standards, terms, signals and safe working loads.
Vigor Industrial LLC and its wholly owned subsidiaries are drug, smoke and vape-free workplaces.
Prospective employees must pass a drug and alcohol test and background check as pre-employment screening.
Sits to weld. Requires tolerance of seated posture up to (45 min.) continuously, for a total of up to (6 hr.) per (8 hr.).
Tests and operates hydro pumps up to 5,000 psi.
Successfully performs work as an individual, as a member of a single craft, or a multi-craft work crew.
Reads blueprints to identify locations of various pipe systems.
Transfers fabricated parts on/off shop table, pallet. Requires vertically transferring fabricated parts weighing up to (40 lbs.) from (4") to (40"), up to (20/hr.).
Accesses vessels, job locations. Requires climbing stairs up to 180 steps/hr. in (8 hr.).
Safety equipment required: must wear welding helmet, hard hat, clothing with no holes, long sleeve shirts, eye protection, respirator, hearing protection, and leather shoes.
Accesses shop, tools, materials, vessels, job location. Requires walking up to (3.0 mi.) in (8 hr.).
Transfers pipe, valves, tools, welding stinger to/from area of need. Requires vertically transferring pipe, valves, tools, welding stinger weighing up to (10 lbs.) from (4") to (76"), up to (60/hr).
Accesses tanks, scaffolding. Requires climbing ladder up to 200 rungs/hr. in (8 hr.).
Makes competent weldments, i.e., targeting pipe and hanger.
Accesses interior of pipes to weld same. Must work in spaces with limited headroom of (24").
Uses a tape measure.
Positions, adjust pipes, valves into position. Must horizontally transfer pipes, valves requiring a force up to (60 lbs.), up to (6/hr.), a distance up to (2 ft.).
Works outdoors: Frequently exposed to prevailing weather conditions.
Performs work with minimal supervision.
Successful job candidates will be asked to provide documentation of their US Persons status.
High school diploma or GED preferred.
Lays out, targets and fabricates various pipe (P-1 and below) to quality assurance standards.
Determines sizes and schedules of pipes/take off of fittings (90o, 45o, and tees) utilized in the fabrication and/or repair of systems.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Requires (near/far/depth/color) vision to operate pipe threading machine, pipe bender, Oakey beveler; to fit, weld, layout pipe; to read tape measure.
Talking, Hearing, Vision, Near Acuity (clarity of vision at 20 inches or less), Far Acuity (clarity of vision at 20 feet of more), Depth Perception (three-dimensional vision to judge distance/ spatial relationships), Color Vision (if required to distinguish colors for job performance or safety), Field of Vision (if required to observe a large field of vision while keeping eye fixed on a given point for job performance or safety), and Smell.
Operation of equipment/tools/vehicles: Uses (1-1/2 to 3 ton capacity) pipe threading machines, pipe bender, Oakey bevelers, positioners, grinders, drill motors/presses, portaband, sawsall, tape measure, cutting torch, overhead crane, lift truck, hand power tools including chainfall, portapower, compressed gas tank and wire feeders.
5 years relevant work experience.
Incumbent performs similar work in all areas of the Yard as the need arises.
Works indoors: Frequently works indoors in environments which may have fumes, chemicals and heat, as well as noise and dust present, depending upon the location of the pipe.
This role is with a federally contracted employer and is subject to regulations that restrict employment to US Persons only (i.e. US Citizens, lawful permanent residents, legally recognized asylees and refugees, and persons protected under INA).
Other Exposures: May be exposed to vibrations, smoke, acids, degreasing cleaners, fumes, free silica, asbestos, dust, welding, solvents, oil, grease, and raw sewage; works in confined spaces.
Successfully completes sustained work at various heights, including, but not limited to 100 feet.
Accesses tanks, bilge areas. Accesses spaces with specific entries (18") x (24").
Traces, disassemble, assemble, layout, weld pipe systems aboard vessels. Requires repetitive assumption of posture to access a point (1 inches) from the floor up to (60/hr.).
Disassembles/assembles and/or repair of shipboard systems.
Stands to operate pipe threading machine, pipe bender, Oakey beveler; to fit, weld, layout pipe. Requires tolerance of standing posture up to (50 min.) continuously, for a total of up to (6 hr.) per (8 hr.).
Properly cares for and safely uses hand and power tools and all company property.
HAZWOPER -First Responder Awareness Level
Sets up and operates flushing machine.
Traces various pipe systems aboard vessels, including steam, lube oil, salt water, fresh water, hydraulics, cargo, crude oil and/or product, compressed air, etc.
Operates pipe threading machine, pipe bender, and Oakey bevelers.
Places rod in welding stinger, advance flex core wire feed, use power tools such as impact wrenches, grinders requiring coupling forces up to (25 lbs.), up to (60/hr.).
Transfers parts (spools) to/from area of need. Requires vertically/horizontally transferring parts (spools) weighing up to (40 lbs.) from (4") to (76"), up to (4/hr.), a distance of up to (25 feet) without mechanical assistance.