Commute Time
Date Posted
Title
Job Type
Benefits
Pay
742 Pipeline Construction jobs in Irvington,AL
New, Posted 20 hours ago
Apply Directly
Crane Operator
Austal USA
Mobile, AL 36602
~ 26 min Onsite
- 3 years minimum work experience as an overhead crane operator in a shipyard environment or similar industry
- Experience as an operator of vertical lift and telescopic boom F/L's
- Must meet all the physical requirements specified by ASME B30.2
- Ability to follow specific instructions and work with limited supervision
- Must possess a thorough knowledge of equipment used in crane/rigging operations. To include, but not limited to, slings, shackles, clamps, chain hoists, load cells, etc.
- Demonstrated ability to interpret and utilize load charts
- Must have a thorough knowledge of USA Standard hand signals
- Must be able to utilize required personal protective equipment [PPE] as per OSHA standards
- Must be able to respond to verbal and audible sounds/commands
- Must be able to read and comprehend simple instructions, correspondence and memos
- Must be able to effectively present information in one-on-one or small group situations
- 18 years of age or older at time of application
- Able to provide proof of US Person Status
- No felony convictions of Theft/Deception or Violent crimes within seven years from disposition date
- No felony convictions of Drug crimes within three years from disposition date
- Willing to submit to a drug screen
- Willing to submit to a background check
- Must be able to tour all vessels and work sites
- Must have the ability to bend, squat, stoop, crawl, and kneel.
- Perform prolonged standing.
- Ability to turn head from side to side and about the vertical axis.
- Ability to turn body at the waist from side to side and about the vertical axis.
- Lift/push/pull 50lbs to 75lbs on an occasional basis.
- Lift/push/pull up to 20lbs on a frequent basis.
- Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps).
- Ability to work at heights above 12' while working from ladders, scaffolding and/or man lifts.
- Able to work at a variety of levels (ex. waist, eye, overhead).
- Demonstrate the ability to make use of required tools and equipment in a safely appropriate manner.
- Demonstrate good balance while working on uneven surfaces and maneuvering obstacles.
- Possess sufficient handgrip and coordination to carry and operate tools and equipment.
- Ability to utilize personal protective equipment (hardhat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards.
- Ability to withstand cold and hot temperatures.
- Ability to enter 18" x 36" openings and work in confined spaces for prolonged intervals of time.
- Able to respond to verbal and audible sounds/commands.
- Able to utilize adequate visual skills.
- Ability to achieve full arm extension while reaching overhead, reaching out, reaching to the side, and reaching down.
- Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers.
- Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks.
- TOOLS: Will be expected to acquire basic tools on a list to be provided by the Crane/Rigging Manager
New, Posted 18 hours ago
Apply Directly
Welder - Submarine Building
Silver Ships
Theodore, AL 36582
~ 14 min OnsiteHealth InsurancePaid Time Off
- Has nominal aluminum welding experience or passed the AIDT welding course.
- Can perform simple welding task that has little to no quality requirements.
- Has the aptitude and desire to learn the welding process directed by Silver Ships Inc.
- Every skill set from Welder Level 3
- Has the ability to weld to a certain standard instructed by his/her supervisor based on the projects welding requirements.
- Has minimum weld deficiencies that require rework.
- Has the ability to repair any weld deficiencies in a timely matter.
- Complies to the companies welding, safety, and quality standards.
- Every skill set from Welder Level 2
- Proficient in Pulse aluminum GMAW and or GTAW
- Can weld in accordance with given weld schedule depicted on blueprints with little to no supervision required.
- Can pass the certified welder test based on ABS and CWI standards from FMS.
- Must be able to perform basic maintenance and repairs on the welding machines required to perform his/her job.
- Must be able to lift up to 50lbs.
- Must be able to stand, bend, stoop, squat or kneel regularly, as well as climb stairs and ladders to complete tasks.
- Must be able to change your own shielding gas bottle required for welding.
- An entry level fitter lays out and fabricates simple aluminum structural parts, such as plates, bulkheads, frames, and small components, and then tack welds them in position within the hull or assembly of the vessel.
- Has the ability to work from a blueprint on simple fabricating tasks with constant intermediate supervision from either a foreman or senior fabricator.
- Has less than one year of experience in the aluminum fabricating field.
- Every skill set from Fitter Level 3
- Has the ability to work from a blueprint on most standard fabricating tasks with occasional supervision from either a foreman or senior fabricator.
- Has more than a year of experience in the aluminum fabricating field.
- Every skill set from Fitter Level 2
- Has the ability to work from a blueprint on all fabricating task, including complicated hull designs and components without any supervision from a foreman or senior fabricator.
- Can be called upon to supervise or advise lesser skilled employees working on similar projects.
- Can perform tasks or projects in the projected or estimated time based on the production schedule.
- Quality is without question.
- Must be able to change your own shielding gas bottle required for stitch welding.
New, Posted 21 hours ago
Easy Apply
Remote Customer Service
Hire Standard Staffing
Irvington, AL
$120,000/yr
RemoteHealth Insurance
- Must be a U.S. or Canadian citizen.
- Comfortable using Zoom and other online communication tools.
- No prior insurance experience is required — only a strong drive to succeed and a willingness to learn.
New, Posted 18 hours ago
Apply Directly
Welder Class 1
Birdon
Bayou La Batre, AL 36509
~ 10 min Onsite
- Must be able to read blueprints.
- Must be able to set up own equipment, tack, distribute heat evenly with a clean bead.
- Must be able to pass a Pre-Employment Mock Weld Test.
- Excellent math skills with the ability to read a tape measure accurately.
- Must be able to weld aluminum and carbon steel proficiently.
- Ability to fix a defected weld.
- Must be able to weld in any position (uphill, horizontal, vertical, or flat)
New, Posted 20 hours ago
Apply Directly
Pipefitter A
Bollinger Shipyards
Pascagoula, MS 39567
~ 34 min Onsite
- Knowledge of blueprints and drawings.
- Prior experience, as a pipefitter is preferred
- Capable of operating a cutting torch and tack welding.
New, Posted 20 hours ago
Apply Directly
PIPEFITTER HA
HII
Pascagoula, MS 39567
~ 34 min OnsiteEducation AssistanceHealth InsuranceRetirement Benefit
- 2-3 yrs of marine, industrial or petro-chemical pipefitting experience
- Completed high school or equivalent pipefitting technical program with NCCER certification.
New, Posted 23 hours ago
Apply Directly
Assembler - Manufacturing
NOV
Grand Bay, AL 36541
~ 15 min OnsiteFlexible Schedule
- Offer of employment is contingent upon the completion of background and drug screenings, conducted in accordance with all applicable federal, state, and local laws.
- Willingness to work overtime and flexible shifts as needed
- Ability to work day or night shift
Install Crew - Construction/Installations
SPATCO
Irvington, AL
New, Posted 8 hours ago
Apply Directly
Fire Alarm Lead Technician
Impact Fire Services
Coden, AL 36523
Higher-Hire
Journeyman Industrial Painter
Brown & Root Industrial Services
Theodore, AL 36582
What companies are hiring Pipeline Construction jobs in Irvington,AL?
- Austal USA
- Silver Ships
- Hire Standard Staffing
- Birdon
- Bollinger Shipyards
- HII
- NOV
- SPATCO
- Impact Fire Services
- Brown & Root Industrial Services
- Austal USA
- Silver Ships
- Hire Standard Staffing
- Birdon
- Bollinger Shipyards
- HII
- NOV
- SPATCO
- Impact Fire Services
- Brown & Root Industrial Services
What is the yearly salary range for Pipeline Construction jobs in Irvington,AL?
The yearly salary range is $120000 - $120000.
The yearly salary range is $120000 - $120000.
