Home My Resume Saved Jobs Matches Feedback

5447 Structural Welder Engineering jobs in Mobile,AL

A Class Structural Welder

Austal

Mobile, AL 36695

A Class Structural Welder

Austal USA

Mobile, AL 36602

Onsite

Ability to work at heights above 12' while working from ladders, scaffolding and/or man lifts.
Ability to read and interpret and work from construction drawings, job specifications, instruction manuals, manufacturer's handbooks, change orders and contract specifications to obtain weld sizing information and material edge preparation requirements
Demonstrate the ability to safely and appropriately use required tools and equipment.
Lift/push/pull up to 20lbs on a frequent basis.
Ability to turn body at the waist from side to side and about the vertical axis.
Able to utilize adequate visual skills.
Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers.
Demonstrated ability to weld multi-pass fillets with only cosmetic correction required
Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down.
Minimum of 1 year as a B-Class Welder at Austal producing advance fillet welds or 2 years of GMAW MIG welding experience at a comparable employer
Demonstrated ability to back step and sequence weld based upon provided information and/or good welding practices
Demonstrated ability to inspect and correct basic weld pick-up without supervision
Ability to wear required PPE
Perform prolonged standing.
Possess sufficient handgrip and coordination to carry and operate tools and equipment.
Ability to maintain and perform routine preventive maintenance on welding equipment
Demonstrated ability to terminate stich welds with minimal weld correction to address minor cosmetic or weld defects
Ability to successfully complete onboarding procedures in preparation to pass AL CV weld qualification test requirements to meet contract requirements for A Class welding on the vessel.
Must be able to tour all vessels and work sites
Ability to turn head from side to side and about the vertical axis.
Ability and willingness to work with and to teach less-skilled workers
Ability to pass A Class skills evaluation test to demonstrate welding ability for full penetration joint details
Ability to withstand cold and hot temperatures.
Ability to enter 18" x 36" openings and work in confined spaces for prolonged periods of time.
Demonstrated ability to evaluate and correct basic weld pick up, with minimal supervision
Ability to take direction and follow instructions
Must have the ability to bend, squat, stoop, crawl, and kneel.
Able to work at a variety of levels (ex. waist, eye, overhead).
Able to respond to verbal and audible sounds/commands.
Demonstrated ability to weld into corners / vertical intersections with minimal blending required
Ability to weld in uncomfortable positions where applicable
Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps).
Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards.
Demonstrated ability to weld continuously for 400mm
Demonstrated ability to weld frame wraps and terminations with minimal blending required.
Demonstrated ability to weld T-Bar wraps and terminations with minimal blending required.
Demonstrate good balance while working on uneven surfaces and maneuvering obstacles.
Lift/push/pull 50lbs to 75lbs on an occasional basis.
A Class Structural Welder
Demonstrated ability to weld fillets for material thicknesses 4mm- 25mm
Good mechanical aptitude with ability to produce consistent quality
Demonstrated ability to weld gusset toe and wraps with minimal blending required.

SmartExplore AI is experimental.

New, Posted 1 hour ago

Resident Structural Engineer

Hilti Corporation

Mobile, AL

Health InsurancePaid Time OffRetirement Benefit

New, Posted 2 hours ago

Concrete Repair Laborer (Moab)

Structural Group

Mobile, AL

$18-$25/hr

Bilingual PreferredEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

New, Posted 1 day ago

Certified Welding Inspector (CWI)

Ecs Southeast

Mobile, AL 36695

Skilled Laborer

North American Construction Services

Mobile, AL 36695

$25-$45/hr

Engineering Internship (Part-time) - Pascagoula, MS

Serco Inc.

Mobile, AL 36695

Flexible ScheduleEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Watch Netflix (Tagger): $12-$46

Netflix

Satsuma, AL 36572

Thompson Engineering Summer Collegiate Internship

Thompson Engineering

Mobile, AL 36695

New, Posted 10 hours ago

Apply Directly

Welder - Hiring Now

Silver Ships

Theodore, AL 36582

~ 23 min OnsiteHealth InsurancePaid Time Off

Must be able to lift up to 50lbs.
Can perform simple welding task that has little to no quality requirements.
Must be able to change your own shielding gas bottle required for welding.
Can pass the certified welder test based on ABS and CWI standards from FMS.
Has the ability to weld to a certain standard instructed by his/her supervisor based on the projects welding requirements.
Complies to the companies welding, safety, and quality standards.
Must be able to perform basic maintenance and repairs on the welding machines required to perform his/her job.
Has minimum weld deficiencies that require rework.
Has the ability to repair any weld deficiencies in a timely matter.
Every skill set from Welder Level 3
Can weld in accordance with given weld schedule depicted on blueprints with little to no supervision required.
Must be able to stand, bend, stoop, squat or kneel regularly, as well as climb stairs and ladders to complete tasks.
Proficient in Pulse aluminum GMAW and or GTAW
Has the aptitude and desire to learn the welding process directed by Silver Ships Inc.
Has nominal aluminum welding experience or passed the AIDT welding course.

SmartExplore AI is experimental.