The FPI is required to be verified against the DJR and submitted for approval during the first 15 minutes of the shift.
Math skills: Able to add, subtract, divide and multiply.
Use of both hands is required to operate tools, perform adjustments, and handle assembly materials with precision.
Line Lead must be certified in all core positions (screw gunning, foaming, cleaning and drain plug installing).
Language skills: Must be able to read, write, speak and comprehend English.
Personal Protective Equipment (PPE) such as ear protection, safety glasses, steel-toed shoes, gloves, and protective clothing may be required depending on the task.
Bend and stand in difficult positions up to 12 hours.
Work is performed in a production setting where seasonal temperatures may range from 100-120°F (with humidity) in summer to cooler conditions in winter.
Prior to shift start up or at product change over, Line Lead must verify that DJR (Discrete Job Report) match each component listed and the finish product as whole.
Able to lift a maximum of 50 lbs. multiple times a day during a 12-hour shift.
Frequent bending, stooping, kneeling, and working in low or awkward positions during production or maintenance tasks.
All applicants must be at least 18 years old and legally authorized to work in the United States on a permanent basis.
Minimum height requirement of 60 inches.
Sufficient visual acuity (e.g., 20/40 with or without correction) is necessary for tasks involving inspection and safe equipment operation.
Where possible, mechanical aids (e.g., hoists, forklifts) are used.
Operator-level roles may involve lifting up to 25 lb repeatedly throughout the shift.
Roles may involve extended periods (up to 12 hours) of standing and walking, including moving at a brisk pace and occasional stair climbing.
Able to push up to 80 lbs. on rollers or wheels.
Education: High School Diploma or Equivalency.
High noise levels are common; hearing protection is provided and required.
Work environment: Hot & humid in summer months, cold during winter.
Technician-level roles may involve lifting up to 50 lb multiple times per day, including overhead lifts.
Minimum of six (6) months in supervisory/leadership role.