Ability to inspect welded joints, grooves, angles, gap allowances, and related aspects of assembly to ensure conformance to specifications using micrometers, calipers, and related precision measuring instruments.
Familiar with welding gases and appropriate uses to determine type of welding to be used, such as metallic arc, inert gas, electrode, and oven treatment, applying knowledge of metals to be joined, contours and angles to be formed, and specified stress tolerances.
Ability to work with typical shop equipment and power tools and operate overhead cranes and fork trucks with proficiency.
Must be able to demonstrate basic welding skills during initial test which requires vertical and horizontal multiple-pass fillet welding on a small scale with 1/16 inch and 3/32 inch flux core and solid welding wire.
Be able to function independently within the context of the team's day-to-day activities.
Ability to use industry standards for proper equipment set-up and efficient use.
Ability to check over engineering drawings and specifications to plan welding operations.
Be mechanically including and able to gather an analyze relevant information, and coordinate work with other team members.
Must know what type of weld wire is used on different metals and what type of gas is used with the various welding wires.
Must be able to proficiently achieve time and quality standards without compromising welding safety standards.
Must be capable of operating overhead cranes to position or move work pieces.
Must be able to handle tasks involving moderate physical exertion and must be able to stoop, bend, twist, and climb while working in confined areas at times.
Must be able to read a tape measure and read blueprints.
Must be proficient in using and adjusting MIG welders to the proper amperage and voltage for welding with various sizes of flux core wire.
High school diploma or equivalent.
Work in a safe manner at all times, following established policies and procedures.
Must be able to use air, power, and hand tools, especially a torch and grinder.
Able to properly pre-heat parts for effective welding and stress relieve finished components.
Must be able to wear a positive-pressure welding hood if or when required.
Ability to read, interpret, and follow basic blueprints, engineering drawings, bill of materials, and other written instructions or procedures.
Must be able to interpret welding prints to determine what type of weld the prints require and where the weld is to be placed.
2-5 years' experience with stick, TIG, and MIG welding in a manufacturing environment.
Must provide own welder's tools and equipment of the trade to perform duties.

SmartExplore AI is experimental.

Easy Apply

Receiving Clerk

Express Employment

Cleveland, OH 44130

$17/hr

~ 34 min Onsite

Good working knowledge of computers
Strong organizational skills
Proficient in Microsoft Excel
1st Shift: 6:00 AM - 2:30 PM, Monday-Friday
Basic math skills (adding and subtracting)
Ability to multitask in a warehouse environment

SmartExplore AI is experimental.

Apply Directly

Car Wash - Detailer

Waterway Carwash

Brookpark, OH 44142

$15/hr

No ExperienceFlexible ScheduleEducation Assistance

New, Posted 5 hours ago

Warehouse Attendant

Cedar Point Careers

Avon, OH 44011

$18/hr

New, Posted 1 day ago

Team Member

Steak n Shake

Brunswick, OH 44212

$17.25/hr

No ExperienceFlexible ScheduleHealth InsuranceRetirement Benefit

New, Posted 23 hours ago

Apply Directly

Service Technician Apprentice

Trane Technologies

Valley View, OH 44125

OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Must possess a valid driver's license for a minimum of 12 months, with no major or frequent traffic violations in the last 3 years.
A High School Diploma or equivalent.
Hourly
This role may be exposed to variable weather conditions, moving mechanical parts, heights, risk of electrical shock, noisy operating equipment and other variable environmental conditions based on location
Must be able to reach your hands over your head
Yes
Must be able to comfortably and routinely access rooftops with extension and/or fixed ladders at heights of 15' to 20', and occasionally, up to 50 feet +
No Industry Experience Required.
This position is highly physical and requires regular use of hands, fingers, walking, stooping, kneeling and climbing ladders. It requires employees to regularly lift and or move up to 10 lbs., frequently lift and/or move up to 40 lbs. and occasionally lift and/or move more than 40 lbs.
Must be able to twist the trunk of your body 90 degrees in each direction
Must be at least 18 years of age when you start on day 1.
Must be able to squat and touch the floor with both hands
Must be able to maneuver confined access areas, as small as 30” vertical x 45” horizontal
Compensation Type:
Safety Sensitive Role:
Annual Base Salary Range or Hourly Base Pay Range:
The company designates certain roles as Safety Sensitive. Safety Sensitive roles may require that you pass additional drug screening.
Must be able to stand on concrete surfaces for extended periods, routinely up to 4 hours
Must be able to wear helmets, safety goggles, fall protection harness and safety boots to safely perform job duties
$19.95 - $37.64
Must be able to safely and legally operate a vehicle using a seat belt
Must be able to safely use a ladder with a 375 lb. total weight limit, while carrying equipment of 50 lbs. or less