853 Welding Construction jobs in Alabama
Apply Directly
A Class Structural Welder
Austal USA
Mobile, AL 36695
Onsite
- A Class Welder
- Minimum of 1 year as a B-Class Welder at Austal producing advance fillet welds or 2 years of GMAW MIG welding experience at a comparable employer
- Ability to pass A Class skills evaluation test to demonstrate welding ability for full penetration joint details
- Ability to successfully complete onboarding procedures in preparation to pass AL CV weld qualification test requirements to meet contract requirements for A Class welding on the vessel
- Demonstrated ability to weld fillets for material thicknesses 4mm- 25mm
- Demonstrated ability to weld gusset toe and wraps with minimal blending required.
- Demonstrated ability to weld frame wraps and terminations with minimal blending required.
- Demonstrated ability to weld T-Bar wraps and terminations with minimal blending required.
- Demonstrated ability to weld into corners / vertical intersections with minimal blending required
- Demonstrated ability to evaluate and correct basic weld pick up, with minimal supervision
- Demonstrated ability to terminate stich welds with minimal weld correction to address minor cosmetic or weld defects
- Demonstrated ability to weld continuously for 400mm
- Demonstrated ability to back step and sequence weld based upon provided information and/or good welding practices
- Demonstrated ability to weld multi-pass fillets with only cosmetic correction required
- Ability to take direction and follow instructions
- Good mechanical aptitude with ability to produce consistent quality
- Ability to inspect and correct basic weld pick-up without supervision
- Good listening and verbal communication skills
- Ability to work independently and as part of a team
- Problem-solving and trouble-shooting skills
- Excellent hand-eye coordination; good spatial orientation
- Ability to consistently meet production deadlines
- Ability to read and interpret and work from construction drawings, job specifications, instruction manuals, manufacturer's handbooks, change orders and contract specifications to obtain weld sizing information and material edge preparation requirements
- Ability and willingness to work with and to teach less-skilled workers
- Ability to maintain and perform routine preventive maintenance on welding equipment
- Ability to wear required PPE
- Must be able to tour all vessels and work sites
- Must have the ability to bend, squat, stoop, crawl, and kneel. Perform prolonged standing
- Lift/push/pull 50lbs to 75lbs on an occasional basis
- Lift/push/pull up to 20lbs on a frequent basis
- Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps)
- Ability to work at heights above 12'
- Able to work at a variety of levels (ex. waist, eye, overhead)
- Demonstrate the ability to safely and appropriately use required tools and equipment
- Demonstrate good balance while working on uneven surfaces and maneuvering obstacles
- Possess sufficient handgrip and coordination to carry and operate tools and equipment
- Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards
- Ability to withstand cold and hot temperatures
- Ability to enter 18" x 36" openings and work in confined spaces for prolonged periods of time
- Able to respond to verbal and audible sounds/commands
- Able to utilize adequate visual skills
- Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down
- Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers
Apply Directly
Welder/Fitter Week Shift
Silver Ships
Theodore, AL 36582
OnsiteUrgently HiringHealth InsurancePaid Time Off
- Has nominal aluminum welding experience or passed the AIDT welding course.
- Can perform simple welding task that has little to no quality requirements.
- Has the aptitude and desire to learn the welding process directed by Silver Ships Inc.
- Every skill set from Welder Level 3
- Has the ability to weld to a certain standard instructed by his/her supervisor based on the projects welding requirements.
- Has minimum weld deficiencies that require rework.
- Has the ability to repair any weld deficiencies in a timely matter.
- Complies to the companies welding, safety, and quality standards.
- Proficient in Pulse aluminum GMAW and or GTAW
- Can weld in accordance with given weld schedule depicted on blueprints with little to no supervision required.
- Can pass the certified welder test based on ABS and CWI standards from FMS.
- Must be able to perform basic maintenance and repairs on the welding machines required to perform his/her job.
- Must be able to lift up to 50lbs.
- Must be able to stand, bend, stoop, squat or kneel regularly, as well as climb stairs and ladders to complete tasks.
- Must be able to change your own shielding gas bottle required for welding.
- Has the ability to work from a blueprint on simple fabricating tasks with constant intermediate supervision from either a foreman or senior fabricator.
- Has less than one year of experience in the aluminum fabricating field.
- Has the ability to work from a blueprint on most standard fabricating tasks with occasional supervision from either a foreman or senior fabricator.
- Has more than a year of experience in the aluminum fabricating field.
- Has the ability to work from a blueprint on all fabricating task, including complicated hull designs and components without any supervision from a foreman or senior fabricator.
- Can be called upon to supervise or advise lesser skilled employees working on similar projects.
- Can perform tasks or projects in the projected or estimated time based on the production schedule.
- Quality is without question.
- Must be able to change your own shielding gas bottle required for stitch welding.
Apply Directly
Welder
Donaldson Company
Auburn, AL 36830
Onsite
- Complete Donaldson welding certification.
- Reads and understands blueprints, pack specs, shipping requirements, and route sheets.
- Must be able to work scheduled overtime hours.
- The Welder performs Mig and Tig welding processes.
- Adjust welding machine settings as required to maintain a quality weld.
- Performs setups and changeovers for departments in a safe, efficient, and timely manner.
- Change tips, weld liner, nozzle, wire, and torch.
- May rotate to other departments as needed to operate a variety of equipment.
- Uses all designated Personal Protective Equipment as required. May be required to wear PAPR.
- Demonstrate proficiently in the operation, changeover, and all required quality checks for department for which applying.
- Shows strong attention to detail, quality, and safety.
- Ability to work in a team environment toward a common goal.
Apply Directly
Welder (1st & 2nd Shift)
Hubbell Incorporated
Leeds, AL 35094
Onsite
- Knowledge and technique of MIG welding
- Aluminum welding experience
- Must have the ability to read a tape measure
- Read and understand blueprints
- Ability to read blue prints
- Strong attention to detail regarding alignment, dimensions, and general inspection
- Perform work involving close tolerances that require constant attention while making adjustments to perform properly
- Education: High school diploma or GED equivalent required
- Mechanical aptitude
- Ability to read blue prints and weld assemblies to comply with the engineering standards
- Dependable with a good attendance record
- Ability to regularly move, twist, bend, and crouch while working
Apply Directly
Welder-Welded Assembly - 2nd Shift
Samuel, Son & Co (USA)
Birmingham, AL 35217
OnsiteUrgently HiringHealth InsurancePaid Time OffRetirement Benefit
- Experience welding in a manufacturing setting.
- Experience with MIG/TIG welding and operating robot welder.
- Ability to follow detailed instructions.
- Demonstrates a commitment to performing job tasks and responsibilities in a safe manner.
- Must be familiar with welding symbols and standards.
- Ability to adjust settings to achieve proper welds.
- Comfortable with a fast-paced environment.
- Will be required to complete a welding assessment to demonstrate welding knowledge and ability.
Apply Directly
Welder
Munters
Daleville, AL 36322
OnsiteFlexible ScheduleEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- High school diploma or equivalent
- Experience in TIG welding, Gas Tungsten Arc Welding (GTAW), MIG welding, and Gas Metal Arc Welding (GMAW); series of MIG and TIG welding tests required.
- Use MIG and TIG welders, hand tools, power tools, welding machines, gas tanks, and torches, clamps, fixtures, grinders (bench and hand), pneumatic die grinder, measuring devices, overhead cranes and forklift.
- Safety Glasses - ANSI Z87.1
- Welding Helmet, minimum ANSI Z87.1
- Leather Welding Gloves
- FR Uniforms
- Gloves - ANSI Cut 3 4544
- Foot Protection, Steel Toe - ASTM F2413-11
- Ph Frequently push with up to 120 lbs. of force.
- Occasionally push and pull up to 50 lbs.
- Frequently lift and carry up to 40 lbs.
- Frequently stand, walk, bend, crouch, kneel, climb, maneuver, squat, lift, grasp, and reach.
- Visual and aural acuity
- Listening
Apply Directly
Welder
Federal Signal
Leeds, AL 35094
OnsiteUrgently Hiring
- High School Diploma or equivalent.
- Welding skills are required.
Apply Directly
Aluminum Welder I
Birdon
Bayou La Batre, AL 36509
OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Aluminum Welder I
- Minimum 3 years of experience as an Aluminum Welder
- High School Diploma or a GED
- Fundamental knowledge in marine or manufacturing industry
- Proficiency in MIG and/or TIG aluminum welding
- Knowledge of aluminum alloys commonly used in shipbuilding (e.g., 5083, 5086, 6061)
- Ability to produce quality work with minimum to no rework
- Excellent math skills with the ability to read a tape measure accurately
- Understanding of welding distortion control and heat input management
- This position is located on-site at our Bayou La Batre, AL shipyard
Apply Directly
Welder, Marathon Equipment
Terex Corporation
Vernon, AL 35592
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- High School diploma or GED
- Ability to understand general arithmetic; ability to write in an understandable manner; understand verbal or written instructions; ability to read and understand instructions, lists and billing materials; use PC based applications, including Mainstar, Outlook, and Microsoft Office, knowledge normally acquired through high school or equivalent experience
- Normal attention with periods of high concentration intermittently to operate machinery approximately 50% of time
- Walking/standing approximately 70%, lifting up to 40 pounds approximately 15% of time; involves repetitive overhead work approximately 10% of time; involves repetitive stooping, forward bending and crouching approximately 5% of time
- Requires use of hands, arms and feet for repetitive lifting; use of hands and arms to operate all manufacturing equipment, meters, chains hoists, automatic drills and general hand tools and to record written information
- Requires ability to follow verbal instructions and to hear for safety purposes
- Requires the ability to visually observe essential functions for satisfactory job performance and safety; color and depth perception required
- Exposure to plant environments with the presence of dust, fumes, noise, and fluctuating temperatures due to lack of climate control
Easy Apply
Heavy Equipment Operator
Express Employment
Mobile, AL 36608
Onsite
- High school diploma or equivalent
- Proven experience operating heavy machinery, preferably in underground utility work
- Valid driver's license and a clean driving record
- Read and interpret blueprints and technical drawings
- Physical stamina and the ability to work in various weather conditions
- Conduct daily inspections of the work area to identify potential hazards and maintain compliance with all safety protocols, including proper use of PPE
What companies are hiring Welding Construction jobs in Alabama?
- Austal USA
- Silver Ships
- Donaldson Company
- Hubbell Incorporated
- Samuel, Son & Co (USA)
- Munters
- Federal Signal
- Birdon
- Terex Corporation
- Express Employment
- Austal USA
- Silver Ships
- Donaldson Company
- Hubbell Incorporated
- Samuel, Son & Co (USA)
- Munters
- Federal Signal
- Birdon
- Terex Corporation
- Express Employment
