Commute Time
Date Posted
Title
Job Type
Benefits
Pay
159 Construction Manufacturing jobs in Virginia Beach,VA
Apply Directly
Shipfitter - Hiring Now
COLONNA'S SHIPYARD
Norfolk, VA 23503
~ 27 min OnsiteFlexible ScheduleHealth InsurancePaid Time OffRetirement Benefit
- Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs.
- Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal.
- Must have both welding and fitting experience in new industrial fabrication/new construction.
- May ride ships at sea for extended periods
- Frequent exposure to noise due to machinery and equipment.
- Employee is required to operate trucks, forklifts & man-lifts.
- Must be able to demonstrate ability to perform multi-pass, all position fillet and butt welds using SMAW (Shielded Metal Arc Welding), GMAW (Gas Metal Arc Welding), and FCAW (Flux Core Arc Welding).
- Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation
- Must have at least one (1) year of experience in welding automation.
- Must have a Bachelors/Registered Apprentice (grad) and at least 2 years relative trades experience (or HS + 6 years trades experience) and at least 2 years of prior supervisory experience.
- Must have knowledge of AWS D1.1 (Structural Steel) and NAVSEA code/requirements (MIL-STD-1688 & MIL-STD-1689).
- Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels.
- Frequent use of respirator.
- Must be able to understand job specifications, drawings, and corresponding technical references years supervisory experience.
- Minimal Travel; 10% or less.
- Must have well-developed communication skills, both verbal and written, to effectively communicate with employees/leadership/customers and prepare/deliver written reports and correspondence.
- Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes.
- Must have regular, reliable attendance.
- While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl.
Apply Directly
Manufacturing Technician - Hiring Now
Teledyne
Hampton, VA 23661
~ 38 min Onsite
- High School diploma or GED equivalent
- 0-2 years of experience in a directly related field
- Candidate must possess U.S. citizenship or be a "U.S. Person". (A U.S. Person is defined as a person who is a lawful permanent resident "Green Card holder" as defined by 8 U.S.C. 1101 (a)(20) or who is a "Protected Individual" as defined by 8 U.S.C. 1324b(a)(3))
Apply Directly
Assembler - Hiring Now
Flowserve Corporation
Chesapeake, VA 23326
~ 30 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Must be willing to work overtime and weekends as required on short notice.
- Basic computer aptitude to use/learn data entry systems and to use Microsoft Office Package.
- Must be able to stand for long periods of time able to safely lift, up to, 50 lbs.
- 3+ years of experience similar to pump assembly.
Apply Directly
Maintenance Trade Helper & General Laborer
Continental Tide Defense System
Norfolk, VA 23502
~ 27 min OnsiteRetirement Benefit
- OSHA-10 training & have your OSHA-10 card
- Must wear various types of personal protective equipment (PPE), such as hearing, eye, head, and hand protection, as required.
- Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs.
- Must possess a high school, trade or vocational school degree.
- Must possess sufficient visual acuity, peripheral vision, depth perception, and night vision to inspect maritime components and systems, identify defects or irregularities, and safely operate tools and equipment.
- Must have the ability to obtain base access and security credentials...e.g. DBIDS | NAVSEA Badge
- Travel may be required within and outside of the continental United States.
- Must be able to lift to 30 lbs., or more, climb ladders, and work in confined or elevated areas.
- Required to visit project sites aboard ships and rigs, both onshore and offshore.
- Due to export control regulations, this role is open to U.S. citizens only.
Apply Directly
Process Technician
MCC
Virginia Beach, VA 23455
Health InsurancePaid Time OffRetirement Benefit
Apply Directly
Supply Technician
BOOZ, ALLEN & HAMILTON
Virginia Beach, VA 23450
OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Experience managing supply accounting, maintaining disposal of government property within the appropriate automated systems such as DPAS or Global Combat Support System-Marine Corps ( GCSS-MC )
- Experience identifying supply and warehouse storage problems
- Experience utilizing the Defense Property Accounting System ( DPAS ) and c ond ucting semi-annual inventories with Responsible Officers
- Applicants selected will be subject to a security investigation and may need to meet eligibility requirements for access to classified information
- Secret clearance
- Experience with technical and management support for the receipt and storage of materials and supplies
- Ability to travel up to 10% of the time
- Experience reviewing documents such as vouchers, purchase requests, work orders, and contract invoices to verify job order numbers against receiving documents and contracts
- Experience c ond ucting Monthly Serialized Inventory
- Secret clearance is required.
- HS diploma or GED
- Knowledge of providing recommendations or developing alternative solutions to conflicting goals and objectives
Apply Directly
Welder - Hiring Now
Oceaneering
Chesapeake, VA 23320
Requires TravelEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Knowledge and practical skills tests required.
- Automated welding processes.
- Lift 10-25 pounds
- Identify color differences
- Lift up to 10 pounds
- Includes exposure to sounds and noise levels that are distracting or uncomfortable
- Operate a motor vehicle
- Must be a U.S. citizen who is not a dual citizen of any other country.
- Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects
- Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead
- Requires working indoors in non-controlled environmental conditions
- Frequent exposure to airborne dust, fumes, and gases
- Involves heavy lifting, frequent stooping or bending and possible working assignments in overhead structures, confined spaces or beneath machinery.
- Must have the ability to obtain government base access.
- Requires working in very hot (above 90 F degrees) or very cold (below 32 F degrees) temperatures
- Wear PPE protection for body, vision, and hearing protection
- Work in confined spaces, kneel, jump, run, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands.
- Must be able to obtain a Secret/Confidential security clearance.
- Deep Submergence Systems (SOC MCD A, B, and C), SUBSAFE Qualification.
- This position is considered MEDIUMwork.
- Job tasks are performed in close physical proximity to other people
- Strict adherence to safety, quality standards, good housekeeping habits, high level of critical thinking/reading comprehension, and frequent travel/overtime are required.
- Qualify as a Welder/Workmanship Inspector in accordance with OII Process Instructions and welding procedures.
- Lift 20-50 pounds
- High School/GED with Apprenticeship Diploma and additional vocational courses or technical school graduate; and/or military and/or civilian experience with welding operations in a repair department or shipyard or fabrication shop.
- Wear PPE for skin protection
- Includes exposure to contaminants
New, Posted 1 hour ago
Apply Directly
Heavy Equipment Operator
Tidewater Staffing
Chesapeake, VA 23322
~ 30 min Onsite
- Must pass all required safety and terminal operations training.
- Must utilize two-way radio communications, respond to all radio checks and radio summons.
- All candidates are required to pass a test.
- Must be flexible with work schedule to accommodate incoming vessels and barges coming to port at any time 24 hours a day, seven days a week including holidays and weekends.
- Must ensure the safety and well being of drivers.
- Must work in an environment with exposure to mud, dirt, dust and other small air borne particles.
- Must wear necessary personal protection equipment at all times.
- Must work in an environment that is mainly outside with exposure to heat, cold and rain or in buildings without heating or air conditioning.
Apply Directly
Welder - Hiring Now
SEAMLESS MARINE FITTINGS
Portsmouth, VA 23704
~ 27 min Onsite
- Adjusting or moving objects up to 50 pounds in all directions
- Required physical ability if mandated by customer or regulatory requirements
- Successful completion of Welder workmanship class
- Moving about to accomplish tasks
- Assessing the accuracy, neatness and thoroughness of the job visually
- Lifting: up to 50 pounds
- A clear understanding of Welding safety
- Knowledge and understanding of filler metal selection
- Bending, stooping, walking and climbing stairs
- Repeating motions that may include the wrists, hands and/or fingers
- Experience required for level II & level III welder
- Familiar with Safety Data Sheets (SDS)
- Welding trade school graduate or up to two years' experience as a certified welder
- Basic understanding of Welding principals and applications
- Remaining in a stationary position, often standing or sitting for prolonged periods
- Demonstrates proper use of Personal Protective equipment (PPE)
- Operating machinery and/or power tools
- 5 or more years industry experience as a welder
- Demonstrate GTAW skills.
- Lift and carry: 50 pounds for 100 feet
- Moving self in different positions to accomplish tasks in various environments
- Operating motor vehicles or heavy equipment
New, Posted 1 day ago
Apply Directly
TEMPORARY ASSEMBLY OPERATOR II - 1st Shift
TE Connectivity
Hampton, VA 23661
~ 38 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Ability to sit for extended periods (up to 8+ hours) while maintaining focus and precision
- Proven reliability with consistent attendance and performance standards
- Comply with applicable quality assurance standards
- Regularly required to use hands to find, handle, or feel; reach with hands and arms and talk or hear
- High school diploma or GED required
- Specific vision abilities required including close vision for detailed microscope work and precision assembly
- Exceptional hand-eye coordination for precision assembly of electronic/mechanical components
- Extended sitting periods required - employee must maintain comfort and precision while seated for majority of shift
- Experience working with small electronic components and fine assembly work
- Proficient microscope operation skills for detailed inspection and assembly work
- Minimum 1 year manufacturing experience with soldering and assembly components (MANDATORY)
- Ability to read and comprehend manufacturing drawings and S.O.Ps/OMS
- Demonstrated soldering experience - manufacturing soldering proficiency is REQUIRED
- Frequently required to stand and stoop, kneel, or crouch when transitioning between workstations
What companies are hiring Construction Manufacturing jobs in Virginia Beach,VA?
- COLONNA'S SHIPYARD
- Teledyne
- Flowserve Corporation
- Continental Tide Defense System
- MCC
- BOOZ, ALLEN & HAMILTON
- Oceaneering
- Tidewater Staffing
- SEAMLESS MARINE FITTINGS
- TE Connectivity
- COLONNA'S SHIPYARD
- Teledyne
- Flowserve Corporation
- Continental Tide Defense System
- MCC
- BOOZ, ALLEN & HAMILTON
- Oceaneering
- Tidewater Staffing
- SEAMLESS MARINE FITTINGS
- TE Connectivity
